![[Mod]Testosterone (C19H28O2)](https://www.elitepvpers.com/forum/iconimages/sro-hacks-bots-cheats-exploits/mod-testosterone-c19h28o2_ltr.gif){kind=small}
Quote:
TheHulk2010
So if silkroad do show u this error MSG sayin this silly words
(servers are offline .\n please visit our homepage to check when they are back )
lol jus use the redirect
IP : 121.128.133.27
IP : 121.128.133.28
IP : 121.128.133.29
and use this port L 15779
dun use the IP num 30...it won't work
and like this ur Problem is solved
--
Silkroad folder\C19H28O2.ini
--Quote:
[Options]
ServerNumber=2
ok Testorterone work now , u must go to
C:\Windows\System32\drivers\etc\hosts and Write this and start Testosteron
121.128.133.28 gwgt1.joymax.com
121.128.133.28 gwgt2.joymax.com
121.128.133.28 gwgt3.joymax.com
Last version 7.45Quote:
F.A.Q
(From)
>>>> READ THIS BEFORE ASKING HERE <<<<
Quote:
How to start several clients
You can start as many clients as your hardware allows. First check if you have the graphics card with enough video-RAM size and PC has enough RAM. Set swap (virtual memory) size to 2GB minimum.Quote:
Why you need multiclient
- To open stall and hunting simultaneously.
- To powerlevel other yours characters in the Academy.
- To pass gold or goods between your characters.
Quote:
How to start several clients with AgBot
You don't need to copy Silkroad folder. Don't use mediapatcher!. And all will be OK.
- Create the shortcut for Loader.exe as shown on the image (with /cfg parameter).
- Start the shortcut (Loader). There will be the Configuration window.
- switch off Bot Compatible. You don't need it.
- switch off Redirect.
- Press Launch button. The game will start.
- Enter ID and password. Log in to game.
- Minimize game window after you don't need it by the command /min or /mini. This will significally reduce memory and CPU usage.
- If you need more clients without the bot again start the shortcut (Loader) with disabled Redirect. You can repeat this while you wish and your hardware allow this.
- Start nuConnecor and AgBot.
- Start the shortcut (Loader) and switch on Redirect.
- This client will work with the bot.
Quote:
How to start several clients with iSrobot
Use same way, except you don't need redirection (Redirect). Don't forget switch on Bot Compatible. Disable iSrobot before start clients without the bot.
Alway start iSrobot (the finger) before starting last client.
1. Make shure that srobot config is correct.
[GAME]2. Make shure that isrobot is not running.
Path=C:Program FilesSilkroadsro_client.exe
MessageWnd=Silkpower message1
DllName=Silk.dll
[SCOPE]
UseWindowsHook=No
[SERVER]
UseBackupServer=No
UseTcp=No
3. Run testosterone with isrobot compatible flag.
4. Click Launch button and wait 2-3 seconds until splash screen has appears.
5. Double click on bot's shortcut.
6. Finger icon appears in system tray.
You nothing need to do except this.
Required
- Good PC.
Quote:
Can you got ban fot this?
Yes, if they can detect.Quote:
Can JM detect the Multiclient using?
No, it's impossible to disallow playing from same IP-address because it make impossible playing for thouse who use firewall or NAT.
Silkroad client use multiclient protection in two ways:
Loader removes both things. From Server side it looks as connection from another PC behind the firewall.
- Set mutex (special system object)
- Transfer to server MAC-address of the LAN adapter.
Yes, it makes servers crowdy, but if you have two PC you can start two clients. So why you can't do this on one PC if your hardware allows this?
- Loader don't modify EXE files and can't be detected during the client update.
- All changes performed in the memory (hope all know the Game Guard is fiction).
- All additional functions performed by the client, i.e. Loader calls usual client functions. Nothing illegal.
Related reconnect instead Traffic error: it's standard ability too. I consider, that from all applications created for this game, the multiclient the most favourable to JM. It is equivalent to that users vote by two hands, instead of one.Quote:
The client have noticed a problem and have to close .. you want send or not. How do i fix this?
Exception caught and the client tried to send report to JM. To prevent sending a report please rename SilkErrSender.exe file. But that not help to avoid it.Quote:
How do i start Testosterone with softmod?
Softmod is not supported. Don't try to use Testosterone with it.Quote:
How do i start Testosterone with tbot?
Tbot is not supported. Sorry.Quote:
How to on Sound? I hear no alarm
Type /status to show current settings. If you type /sound on private you will see message:
Alarm on private message : On.
Is C:WINDOWSMediaringin.wav installed on your system?Quote:
How to enable Testosterone UI window?
Turn off Bot compatibility flag.
Bot compatibility flag is necessary only for iSrobot.Quote:
Why is there this "Win32.Malware.gen!80 (suspicious)" and this "Sus/ComPack-C" in virus scan?
I use simple VM protection in my programs. Some anti-virus detect it.Quote:
Why I get C9 error?
There is 3 reasons which can be cause of this error.
- You have poor network connection.
- You have patched media.pk2. Don't use mediapatcher at all. Use the redirect feature to redirect the client to nuConnector & AgBot or turn it off if you are not using it.
- The main gateway is turned off. Use alternative gateway. To change gateway number please add next line to C19H28O2.ini:
[Options]
ServerNumber=0
Quote:
You may not have copied the Loader into Silkroad folder. Please check that Loader.exe located in the same folder as sro_client.exe and working directory is Silkroad.
Quote:
How can I open a second client? I copied my silkroad-folder and runned the launcher in this folder again, but nothing happens...
Don't need copy silkroad folder. Just run Loader.exe again and click Launch button. Don't use mediapatcher!Quote:
I'm constantly getting a Malicious modification of code!! execution aborted error. How to fix that?
That means MD5 sum for Loader.exe or C19H28O2.dll is not correct. It can happens if you use one file from version 7.3 and second file from version 7.4 or one of them was modified by virus.
Support ONLY original SRO Client v1.231
Quote:
Password: recyfer.info
MD5:
edf2791321d436e851d30123b1350029 *C19H28O2.dll
13305082605949d491d5aca4c85b4bc2 *Loader.exe
Features:
- Muliclient.
- Auto relogin (please wait about 12 seconds after message "Failed to connect to server").
- Nude patch.
- Infinity zoom.
- Disable swear filter.
- Minimize in taskbar (low memory mode)
- Mini-mode (1/6 screen size)
- Windowed mode.
- Toggles hiding players and monsters. (Holding 'v' key).
- Toggles showing loot on ground. (Holding 'z' key).
- Weather control.
- Auto-rise mastery.
- Auto-accept resurrection.
- Auto-accept invite to party
- Auto-distribution of status points.
- Alarm on private message.
- Alarm on unique monster.
- Alarm on a bargain start.
- Unique monster log.
- Block messages (All, Whisper, Party, Guild, Union, Global)
- Character info window.
- Loader configuration dialog.
- Redirection the client to local port (substitute for mediapatcher)
- Auto-demurder.
- Auto-heals pets
- Auto-fuse alchemy materials
- Block list (block messages)
- Team list (allowed to join party)
Code:
01/16/08 05:13:35 appears Cerberus 01/16/08 05:19:31 appears Lord Yarkan 01/16/08 05:24:52 __KARTAL_1_ killed Cerberus 01/16/08 05:25:37 killed Isyutaru 01/16/08 05:29:44 G0d killed Lord Yarkan
To open configuration dialog, please, run loader with parameters
Click Start->Run (or press Win + R) and type
"C:\Program Files\Silkroad\Loader.exe" /cfg
Added startup commands option in C19H28O2.ini:
Code:
[Hercules-Rumata] Commands=/ap on;/arc on
Commands are separated with ";".
Change log (v6.3):
- Fixed /arc & /ap
- Added new command: /none - get weather from the server
- Renaming sro_client window title
Change log (v6.4):
- Added bot compatibility option (default)
The next functions is not compatible with iSroBot:
- Character info window (/ui command).
- Renaming sro_client window title
Change log (v6.5):
Fixed bugs:
- /ui command without compatibility flag
- redirection to local port after game restart
Change log (v6.6):
New functions:
- /ad -- auto-demurderer. (continuous resurrect in town untill you remove PK status)
- extended info in UI (if you would select another one you can see his gear)
- alternative server option in C19H28O2.ini
Code:
[Options] ServerNumber=1; can be 0 or 1
- /ap - will accept invitation to party not only from the leader
Change log (v6.7):
Fixed bugs:
- Gear of player is visible in UI even if he is under monster mask
- Reconnect after prompt 'press [ Connect ]' only.
Change log (v6.8):
Fixed bugs:
- Refresh progress bars in UI fixed
- Show Configuration Dialog box at startup.
- iSroBot compatibility is off by default.
- Auto-heals pets (/ahp)
Change log (v6.9):
Fixed bugs:
- Support client 1.144
- Removed Debug pet log.
- Fixed auto-accept resurrect
- Support client 1.144(145)
- /block -- black list
- /team -- white list
- /fuse -- auto fuse (no need open alchemy window)
- Time of disconnect
- New sound events
- You can force to use one only processor
- Fixed bug: The loader does not create ini-file.
- Support client 1.151
- Fixed bug: Error of detecting free slots in the inventory.
- Fixed bug: /ahp command doesn't working.
- Fixed bug: /ap command doesn't working.
- Fixed bug: no redirection at second attempt to login.
- Fixed bug: 99% in EXP gauge.
- Support client 1.153
- Support client 1.158
- Fixed redirection
- Support client 1.159
- Syntax of /ahp command changed (/ahp feed [0..99])
- Support client 1.165
- Inject option in C19H28O2.ini. Silk.dll should located in bot folder inside game folder. Finger should be launched before!
Code:[Option] inject=1
- /fuse [count] -- series length
- Support client 1.171
- Bug-fix.
- Support client 1.173
- Support client 1.174
- Support client 1.175
- Time of death
- Custom sounds. New section in C19H28O2.ini:
You can add 10 custom sounds with indexes 0..9. Index of sound file can beCode:[Sounds] Sound0=ringin.wav Sound1=tada.wav
used in last parameter of command /sound. For example:
Code:/sound on unique 1
- CPU Core interleaving (if "Use one processor" ticked)
- Support client 1.182
- Copy/Paste to any edit box (Chat, Login, Password) Ctrl-C/Ctrl-V
- Support loading client with custom name in config file or command line. Command line parameter has priority over settings in the ini file.
Code:[Options] ClientExeName=SRO_Client1.exe
Code:Loader.exe /cfg /client=SRO_Client2.exe
- Event's snow disabled forever.
- Show the configuration dialog, if the Ctrl key pressed when the Loader runs.
- Support client 1.184
- Support client 1.186
- Support client 1.192
- Support client 1.193
- Support client 1.194
- Support client 1.197
- Reconnection lock removed
- Support client 1.201
- Fixed bug: Sometimes commands are not executed.
- Support unpacked client 1.203
- Support original client 1.203
- Support client 1.204
- Minimize button now enabled when client in window mode.
- /ap any -- accept any party.
- Support client 1.205
- Support client 1.210
- Support client 1.231
- Now correctly determined the number of slots in the inventory
Attention! To prevent account ban, please, rename SilkErrSender.exe file
Latest Dihydrotestosterone (C19H30O2) v1.0.153 (by Eternal Shield)
Configurator for C19H28O2.ini and more...
password for Dihydrotestosterone: silkroad-online.ru
Change list v1.0.153:
- support /ap any
#Status - inVincibLe
