Thank you for your commitment xRIDDI.
The Arky is a fine thing and not so complicated.
The only thing that you may fix should be that the bot logs in again after the sinking.
Otherwise, many thanks again, you're doing it great.
Hello all, here is V1.4 which I have been working on today.
Now I am almost positive some of you will have problems and some wont, so if you have a problem, please describe it in as much detail as you can (and check the Scar Output in case a message is displayed).
Changelog:
Code:
ArkyBot V1.4
+ Fix Login again.
+ Fix Repair after sunk.
+ Fix Reconnect after connection lost.
+ Closes Group and any other menus which can be closed in the same way.
+ Avoids Shiny around Islands (Beta)
+ Faster collection of Chests
+ Faster collection of Guild Shinys
+ Faster collection of Kraken Meat
+ Improve repairing
+ Improved collection detection.
Note: V1.4 comes with the Avoiding of Shinys near Islands - this is still in testing and I need you guys to tell me if it works, and if it doesn't.
This version also requires you to turn this feature on or off, so its the users choice.
When using V1.4, please make sure you are Full Rep or Repairing, and AWAY from the island when you start the bot.
The repairing issue after being sunk should be fixed, I have tested it on a few computers with different screen sizes and configurations and has worked fine for me. If it isn't fixed, it would greatly help if you could upload a picture of your whole screen when you are sunk in 24bit BMP format.
Important: You need to be full rep when you start the bot!
Thanks,
xRiDDi.
(ps - who know that nearly every guild island is different, haha, i thought they were all the same )
Hello all, here is V1.4 which I have been working on today.
Now I am almost positive some of you will have problems and some wont, so if you have a problem, please describe it in as much detail as you can (and check the Scar Output in case a message is displayed).
Changelog:
Code:
ArkyBot V1.4
+ Fix Login again.
+ Fix Repair after sunk.
+ Fix Reconnect after connection lost.
+ Closes Group and any other menus which can be closed in the same way.
+ Avoids Shiny around Islands (Beta)
+ Faster collection of Chests
+ Faster collection of Guild Shinys
+ Faster collection of Kraken Meat
+ Improve repairing
+ Improved collection detection.
Note: V1.4 comes with the Avoiding of Shinys near Islands - this is still in testing and I need you guys to tell me if it works, and if it doesn't.
This version also requires you to turn this feature on or off, so its the users choice.
When using V1.4, please make sure you are Full Rep or Repairing, and AWAY from the island when you start the bot.
The repairing issue after being sunk should be fixed, I have tested it on a few computers with different screen sizes and configurations and has worked fine for me. If it isn't fixed, it would greatly help if you could upload a picture of your whole screen when you are sunk in 24bit BMP format.
Important: You need to be full rep when you start the bot!
Thanks,
xRiDDi.
(ps - who know that nearly every guild island is different, haha, i thought they were all the same )
Let me test it
Wait 5 min and tell you is it works good
-------------------------------------------------
Please make sure you are full rep. or repairing.
Successfully executed
Don't works ....
Let me test it
Wait 5 min and tell you is it works good
-------------------------------------------------
Please make sure you are full rep. or repairing.
Successfully executed
Don't works ....
Make sure you are full rep.. I mean completely full rep
Your colours are the exact same as mine, and as have been wrote into the script. So, i can only assume that your repair button is not inside the wx1, wy1, wx2, wy2, square you have defined.
Can you post the coords you have placed in them variables? on line 66-69
Your colours are the exact same as mine, and as have been wrote into the script. So, i can only assume that your repair button is not inside the wx1, wy1, wx2, wy2, square you have defined.
Can you post the coords you have placed in them variables? on line 66-69
i understoond, but im not stupid to put this bar away
wx1:= 7; //Top left of seafight window x coords
wy1:= 71; //Top left of seafight window y coords
wx2:= 1670; //Bottom right of seafight window x coords
wy2:= 1011; //Bottom right of seafight window y coords
When sank the ship does not work. And after being sunk on the scar says:
pressing Repair
For Test Only: click
Clicking: 109.629
pressing Repair
For Test Only: click
Clicking: 109.629
successfully executed
And do not click on the window to ripare. What should I do?
i understoond, but im not stupid to put this bar away
wx1:= 7; //Top left of seafight window x coords
wy1:= 71; //Top left of seafight window y coords
wx2:= 1670; //Bottom right of seafight window x coords
wy2:= 1011; //Bottom right of seafight window y coords
Quote:
Originally Posted by Khaye12
When sank the ship does not work. And after being sunk on the scar says:
pressing Repair
For Test Only: click
Clicking: 109.629
pressing Repair
For Test Only: click
Clicking: 109.629
successfully executed
And do not click on the window to ripare. What should I do?
Please send me a full picture of your screen, thanks
Quote:
Originally Posted by Dieter37
How I make a 24bit PMG Picture??? Donīt rep after sunk. Please help me. thanks
Sorry for my english im german men^^
(Release)BYM Shiny Hack (Video)100% Work 12/11/2011 - Facebook - 355 Replies WebPage
http://darksieder.da.funpic.de
Text Instruction
1.Scann wiith Cheat Engine For Array of Bytes
This one-------> 24 04 a2 46 (make all Mushroom give Shiny)
Change :24 04 a2 46 into---> 24 00 a2 46
2. Scann for this------> 4A CA 10 00
double click on both so that they bean importet down.
So now we have 2 codes
1. 4A CA 10 00 ------> 4A C2 10 08
)
