Originally Posted by ♛Wolf♛ (Post 34768908)

Hallo, Der FT script sollte auf EU auch gehen, ich habe auch schon die Attacken Namen umgeändert aber ich frage mich , wie er sein inventar leert, weil Kromede dropt ja Waffen welche das inventar belasten

Originally Posted by zScars (Post 34769259)

Im a bit confused on the Fire Temple script, when I load up my PC and my group holder PC which script do I start first?

Must I use default key binds/any specific resolution?

Originally Posted by Instructions.txt

1. Before you can start you have to edit one line of the main script
Search for this line

--> Command=/invite GROUPHOLDERNAME;###REPLACE###


and replace the "GROUPHOLDERNAME" with your second charactername which gives your main a group
save the script.

2. You have to run 2 clients and both of them need to have a hack injected.
3. you need to open the script editor for both (you can differ the hack trayicons by hovering over the icon)
4. With your groupholder you have to load the "Groupholder.pscp" file and play it
5. Be sure you stay infront of Fire Temple (main client)
6. Be sure you're binded to the Eltnen Observatory (Elyos) or to the Slag Bulwark (Asmodian)
7. Be sure the Instance entry dialog is moved to the top left of your screen (main client)
8. With your main you have to load the right script (ELYOS/ASMODIAN) and which class you need, just hit play then.

Originally Posted by zScars (Post 34769279)

Ah ok I'll try windowed mode. Thanks

And does it matter which character I begin the script on?

Originally Posted by Paraly (Post 34769274)

Originally Posted by Instructions.txt
1. Before you can start you have to edit one line of the main script
Search for this line

--> Command=/invite GROUPHOLDERNAME;###REPLACE###


and replace the "GROUPHOLDERNAME" with your second charactername which gives your main a group
save the script.

2. You have to run 2 clients and both of them need to have a hack injected.
3. you need to open the script editor for both (you can differ the hack trayicons by hovering over the icon)
4. With your groupholder you have to load the "Groupholder.pscp" file and play it
5. Be sure you stay infront of Fire Temple (main client)
6. Be sure you're binded to the Eltnen Observatory (Elyos) or to the Slag Bulwark (Asmodian)
7. Be sure the Instance entry dialog is moved to the top left of your screen (main client)
8. With your main you have to load the right script (ELYOS/ASMODIAN) and which class you need, just hit play then.

Originally Posted by zScars (Post 34769323)

Gotcha.

For #7 Im unsure what that is, would that be a chat box? Does the chatbox require something to be checked?

Originally Posted by zScars (Post 34769750)

Sweet got it working!

Thanks for the help and the fast replies!

One last Q,

I know theres always a risk of getting caught with bots/programs, but are your chances of getting caught higher if you enable gravity/collision etc... Does Aion monitor short range teleports etc.. ?

Originally Posted by lemon07r (Post 34773263)

So I have a tournament edition keyboard, aka i cant even use any of the numpad controls, any work around?

Originally Posted by Tieger2129 (Post 34773275)

my para vanilla tool is no longer when I open it is the Adminestrator request and then nothing since 2.6 please can you help me ??

Originally Posted by Paraly (Post 34773267)

Sure, you can rebind any hotkey.
Simply rightclick at the trayicon of the hack -> Hotkeys.. and change what ever you want (Don't forget to close the window when you're done)

Originally Posted by lemon07r (Post 34773292)

Thanks, working now. So I am trying to skip lakhara in btnm (soloing), but cant seem to get through the gate with any of the hacks. Am I doing something wrong? So my other option is to go too high for to lakhara to hit and kill him from there, but im not sure how to do this, the tool is a bit confusing. Playing ranger btw.

Originally Posted by ♛Wolf♛ (Post 34773759)

Ich verstehe den AutoMproh script nicht zu richtig, warum sind dort die Zuordnungen in den Dateien von 2 bis 8 und warum sind dort mehrere Dateien, und brauch ich irgend ein marko. Und so neben bei auch in den Moprg scripts wechselt er doch auch nicht die Scripte,aslo rein vom Source Code her

Originally Posted by Paraly (Post 34774301)

Das Script loggt durch all deine Chars und morpht dort das selektierte Muster, du musst halt wählen wieviele Chars du hast, das sieht man doch auch im Scriptnamen.
Nein du brauchst kein Makro, befolg einfach was in der instructions.txt steht.

Originally Posted by ♛Wolf♛ (Post 34775800)

Es gibt aber keine .txt, deswegen frage ich ja

Originally Posted by AutoMorph

;;BE SURE AION IS IN WINDOWED MODE
;;Be SURE YOUR UI SIZE IS AT 100%
;;BE SURE YOU GOT ENOUGH AETHER
;;BE SURE YOU GOT ENOUGH PERER JELLY
;;BE SURE YOU CHECKED THE RECEIPT AT
;;EVERY CHARACTER BEFORE YOU START
::::::::::::::::::::::::PRESS PLAY;;;;;;;;;;;;;;;;;;;;;;;;;;;

Originally Posted by Paraly (Post 34780597)

There's a ban wave at EU for using the barracks script currently, be careful.

Originally Posted by ♛Wolf♛ (Post 34781010)

Do you have more then 1 ban review atm ?


And How I can use it careful?

Originally Posted by Paraly (Post 34781208)

There're 3 reports about the upper forts scripts now.
And how to use it careful? simply avoid using the script for the next 2-4 weeks, barracks don't give that much at EU so it's not too bad.

Originally Posted by lemon07r (Post 34782056)

Only EU atm right?

Originally Posted by lemon07r (Post 34782626)

The kysis krotan script isnt working for me on ranger, I only had kysis to test with but tried yesteday and today. It only loots the big chests, then get stuck near the hall way to the boss, then after a while gives me a "success" without touching any of the abyss statues. Im using the newest version ranger script ftr. Miren script works perfectly fine.

Originally Posted by ♛Wolf♛ (Post 34783616)

Hey,i hate 1 thing on taht programm, the stability. You should incomplement some unsage of Thread's in the Programm, because it can only do 1 thing at the time. If i opened the menu ingame i can not use the hotkeys. Sometimes i have to click 10x on Load and something open and then it open 10 times. Or when I click F8, most of the time I need to press more then once F8 and the programm Freezes and then i mostly kill him over task manager.


Or sometimes i can not disable collision and I need to resart everything or when I activate over menu gravity and then i press over hotpay gravity then sometimes I got the Same thing.


For Example in[Only registered and activated users can see links. Click Here To Register...] it's a lot better with the stability.


I have the feeling you used AutoIT, which normaly is a script lang is not good for doing more things together

Originally Posted by lemon07r (Post 34787178)

Mine works fine, I run 2-3 at once. Plus I click once and wait a few seconds, sometimes have to click twice but thats it. Maybe its your computer?

Originally Posted by Paraly (Post 34782833)

Change the
line to
you find the line at the very top of the script.

Originally Posted by ♛Wolf♛ (Post 34788169)

Nope, It's normaly not my Computer xDI bottet like 5 times WoW or 32 LoL on It ^^


Now i got the problem, I activate :
[IMG=expandable: 1]http://i.imgur.com/cURisa2.png[/IMG]


an I press 9 to activiate Fast Underground Function and nothing happens or I click + or - to Glide and nothing happens

EDIT: and when i restart my game then it works. Idk

Originally Posted by Paraly (Post 34790009)

You know that you can't use any hotkeys while the menu is opened?

Originally Posted by witti91 (Post 34791803)

nen kollege von mir nutzt windows 10 hat sich das tool gekauft, kanns aber nicht öffnen...
nach dem starten des programms tut sich einfach garnichts...

Originally Posted by Paraly (Post 34791817)

Schick mir eine private Nachricht mit seiner Paypal email und seiner unique-ID

Originally Posted by malysia (Post 34792262)

add new script someday?

Originally Posted by Paraly (Post 34792271)

I've added the Illuminary Obelisk script just a week ago?