Looking for Kamael IG L2Walker 1.89 verify server

binarydaemon · 12/17/2007, 19:02

The term loop-back has the following meanings:

1. A method of performing transmission tests of access lines from the serving switching center, which method usually does not require the assistance of personnel at the served terminal.

2. A method of testing between stations (not necessarily adjacent) wherein two lines are used, with the testing being done at one station and the two lines interconnected at the distant station. Commonly called loop around when the interconnecting circuit is accessed by dialing.

3. A patch cable, applied manually or automatically, remotely or locally, that facilitates a loop-back test.

This article contains material from the Federal Standard 1037C (in support of MIL-STD-188), which, as a work of the United States Government, is in the public domain.

A loopback is a communications channel with only one endpoint. Any message transmitted through such a channel is immediately received by the same channel.

darkmenx · 12/17/2007, 19:07

206.127.148.69 nprotect.lineage2.com

retail gameguard update site, open it retards before posting ****.
i just put it in the hosts file to prevent gameguard update error.

darkmenx · 12/17/2007, 19:15

for example:

werop · 12/17/2007, 19:31

Originally Posted by Inex
1. Installing Microsoft Loopback adapter
- a. TCP/IP protocol setup
2. Hosts file edit (

)
3. Bot download ( WALKER - lineageII Home L2walker Towalker )
4. Tcp Tunnel setup (

)
5. Own
-- 1. How to install the Microsoft Loopback adapter in Windows XP
##################################################
1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.
##################################################

-- 2. TCP/IP Protocol
##################################################

IP address: 116.68.136.61
Mask: 255.255.255.0
##################################################

Attention: When you wanna run a legit client, put in your hosts everything #, should be like that:
#127.0.0.1 localhost
#127.0.0.1 vip.tt2xz.com
#127.0.0.1 vip1.tt2xz.com
#127.0.0.1 vip2.tt2xz.com
#127.0.0.1 vip3.tt2xz.com
#127.0.0.1 vip4.tt2xz.com
#127.0.0.1 vip5.tt2xz.com
#127.0.0.1 vip6.tt2xz.com
#127.0.0.1 vip7.tt2xz.com
#127.0.0.1 vip.towalker.com
#127.0.0.1 vip1.towalker.com
#127.0.0.1 vip2.towalker.com
#127.0.0.1 vip3.towalker.com
#127.0.0.1 vip4.towalker.com
#127.0.0.1 vip5.towalker.com
#127.0.0.1 vip6.towalker.com
#127.0.0.1 vip7.towalker.com
#206.127.148.69 nprotect.lineage2.com
#116.68.136.61 L2authd.Lineage2.com

Once you have it and you wanna run bots, put again the other hosts without those two last lines in # and execute the .bat from the tcptunnel.rar

Credits to darkmenx
Special thanks to knix

WORKS!!!!
Doesnt works

VIPsushi · 12/17/2007, 20:23

Sorry to say ...but dang !! IT DOES WORK!!!

Kudos to Dark !!!!

The authd ip address is the SEA login server ! hence bypassing walker verify validation !!!

ZF2007 · 12/17/2007, 20:25

Ye, so how do I run this on VISTA?

montezuma x · 12/17/2007, 20:28

IP address: 116.68.136.61
Mask: 255.255.255.0

Where does that address go? tracert shows sanjose hop to asianet.com

VIPsushi · 12/17/2007, 20:35

Quote:

Originally Posted by montezuma x

IP address: 116.68.136.61
Mask: 255.255.255.0

Where does that address go? tracert shows sanjose hop to asianet.com

it is going to SEA login servers..please read the thread before asking again and again.

Enjoy ! xD

VIPsushi · 12/17/2007, 20:36

Quote:

Originally Posted by ZF2007

Ye, so how do I run this on VISTA?

Come on ! read the original thread from dark. somebody explains it for vista.

nikolakis_gr · 12/17/2007, 22:39

so guys you can use l2walker in official now?

OneFromOldTimes · 12/17/2007, 23:06

ok ive done everything ive seen in all posts about the 1.91 IG walker.... but ******* hell... i cant get it verifyed is it cuz i only got L2asrv version_0_51 [10.5.3-10.7.4]??? or is it some other ****** up shizzle? :/

nikolakis_gr · 12/17/2007, 23:11

its not working for me too

yank3s · 12/17/2007, 23:55

So afterall, is there any VerifyServer Emulator that works with Kamael or not??? Please if anyone has post here.
thanks

Dronei · 12/18/2007, 00:13

Quote:

Originally Posted by Inex

1. Installing Microsoft Loopback adapter
- a. TCP/IP protocol setup
2. Hosts file edit ( )
3. Bot download ( )
4. Tcp Tunnel setup ( )
5. Own
-- 1. How to install the Microsoft Loopback adapter in Windows XP
##################################################
1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.
##################################################

-- 2. TCP/IP Protocol
##################################################

IP address: 116.68.136.61
Mask: 255.255.255.0
##################################################

Attention: When you wanna run a legit client, put in your hosts everything #, should be like that:
#127.0.0.1 localhost
#127.0.0.1 vip.tt2xz.com
#127.0.0.1 vip1.tt2xz.com
#127.0.0.1 vip2.tt2xz.com
#127.0.0.1 vip3.tt2xz.com
#127.0.0.1 vip4.tt2xz.com
#127.0.0.1 vip5.tt2xz.com
#127.0.0.1 vip6.tt2xz.com
#127.0.0.1 vip7.tt2xz.com
#127.0.0.1 vip.towalker.com
#127.0.0.1 vip1.towalker.com
#127.0.0.1 vip2.towalker.com
#127.0.0.1 vip3.towalker.com
#127.0.0.1 vip4.towalker.com
#127.0.0.1 vip5.towalker.com
#127.0.0.1 vip6.towalker.com
#127.0.0.1 vip7.towalker.com
#206.127.148.69 nprotect.lineage2.com
#116.68.136.61 L2authd.Lineage2.com

Once you have it and you wanna run bots, put again the other hosts without those two last lines in # and execute the .bat from the tcptunnel.rar

Credits to darkmenx
Special thanks to knix

WORKS!!!!

This works fine for me (running on vista)

Dronei · 12/18/2007, 00:21

HERE ARE THE INSTRUCTIONS FOR WINDOWS VISTA
- a. TCP/IP protocol setup
2. Hosts file edit (

)
3. Bot download (

)
4. Tcp Tunnel setup (

)
5. Own
-- 1. How to install the Microsoft Loopback adapter in Windows Vista
##################################################
1. Open Control Panel
2. Click Classic view on the left
3. Double-click Add Hardware, then click next.
4. Click Install the hardware that I manually select from a list, and then click Next.
5. Click Network adapters, and then click Next.
6. In the Manufacturer box, click Microsoft.
7. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
8. Click Finish.
##################################################

-- 2. Setting the TCP/IP Protocol in the Microsoft Loopback Adapter
##################################################
right click the network icon in tray and select "Network and Sharing Center", on your left there should be "manage newtork connections" click it; now right click the Mictosoft Loopback Adapter and select properties; double-click TCP/IPv4 and enter the following:

IP address: 116.68.136.61
Mask: 255.255.255.0
##################################################

Put this in your hosts file:

127.0.0.1 localhost
#127.0.0.1 vip.tt2xz.com
#127.0.0.1 vip1.tt2xz.com
#127.0.0.1 vip2.tt2xz.com
#127.0.0.1 vip3.tt2xz.com
#127.0.0.1 vip4.tt2xz.com
#127.0.0.1 vip5.tt2xz.com
#127.0.0.1 vip6.tt2xz.com
#127.0.0.1 vip7.tt2xz.com
#127.0.0.1 vip.towalker.com
#127.0.0.1 vip1.towalker.com
#127.0.0.1 vip2.towalker.com
#127.0.0.1 vip3.towalker.com
#127.0.0.1 vip4.towalker.com
#127.0.0.1 vip5.towalker.com
#127.0.0.1 vip6.towalker.com
#127.0.0.1 vip7.towalker.com
206.127.148.69 nprotect.lineage2.com
116.68.136.61 L2authd.Lineage2.com

exit and save hosts

#################################################
extract tcptunnel and run forward.bat; after that run the new l2walker which i guess u already downloaded

Credits to darkmenx
Special thanks to knix

WORKS!!!!

I hope noone is angry cause i edited that for windows vista, if so i appologise