DMA - Fortnite (read this if you want to buy DMA)

[greener.exe]

This a informational post regarding DMA devices as the fortnite cheating scene has seen a vast increase in buyers and questions posed towards us.

DMA cards

Dma card - To read game memory. Obligatory to use any DMA solution. They all the same,except (Lurker,Immortal - Just don't buy this models and you thank me later ) so buy the cheapest that you can find.


Kmbox - Kmbox B Pro or Net version. They are almost the same,B pro is a bit stable.

Cfw/Firmware - THE MOST IMPORTANT PART! The only thing that can get you banned - bad CFW. So don't use preflashed cfw. Save some money from dma/fuser and buy good cfw to hide your dma on your gaming pc.

4. Fuser/Combiner - To combine 2 images from gaming and radar PC.

So if you want to just use "walls" buy: Dma + Firmware
If you want aim/trigger help: Dma + Firmware + KmBox
If you want "walls" on your MAIN screen: Dma+ Firmware+ Fuser
If you want "walls" on your MAIN scree + aim/trigger: Dma+ Firmware+ Fuser + KmBox

If anyone has any other idea's regarding this post them below.

THIS IS NOT A PROMOTION OF ANY OF THE MENTIONED SELLERS ABOVE JUST WHATS THE "norm" and what is recommended by a vast number of people.

[lightningZDMA]

Still need two computers (one computer is also fine, but why use DMA if only one computer is used)ne for gaming, the other for running cheese. DMA is installed in the PCIe slot of the motherboard of the gaming computer, and then connected to the second computer (running cheese) via a data cable.
The gaming computer needs to have a PCIe slot for installing DMA, and the second computer needs to support USB 3.0 and have decent configuration, usually recommended to use a CPU above i5 6500 and 8GB of memory.

In addition to FUSER, there is actually a free option called moonlight/parsec that can achieve secure ESP effects (requires CHEESE support). It requires a gigabit network support between your two computers, and the latency may be slightly higher compared to FUSER

[greener.exe]

Originally Posted by lightningZDMA

Still need two computers (one computer is also fine, but why use DMA if only one computer is used)ne for gaming, the other for running cheese. DMA is installed in the PCIe slot of the motherboard of the gaming computer, and then connected to the second computer (running cheese) via a data cable.
The gaming computer needs to have a PCIe slot for installing DMA, and the second computer needs to support USB 3.0 and have decent configuration, usually recommended to use a CPU above i5 6500 and 8GB of memory.

In addition to FUSER, there is actually a free option called moonlight/parsec that can achieve secure ESP effects (requires CHEESE support). It requires a gigabit network support between your two computers, and the latency may be slightly higher compared to FUSER

Appreciate the contribution man thank you!

[Lalo Salamanca]

Besides moonlight and parsec you can use obs with obs ndi plugin.

[Relentless]

Originally Posted by Lalo Salamanca

Besides moonlight and parsec you can use obs with obs ndi plugin.

You probably can, but not many people have looked into that, there needs to be more documentation to set it up etc

For the dmas I’d recommend you guys go with a Squirrel -

Pretty cheap, gets the job done. You could go even cheaper and get a MVP card but they can have flashing issues.

There are two different types of DMs cards 35T and 75T. If you have a good second pc and want as much cheat fps / speeds as possible then go with a 75T they’re around 250$ however. Where as a 35T is around 150$.

Your 2nd pc will almost always want to have a CPU with AVX2 support (I’m pretty sure all intel cpus above generation 6 have it). Also your 2nd pc wants to have the best usb support possible 3.0 MINIMUM, 3.2 is recommended, but even better is a thunderbolt port. This will increase speeds drastically.

[greener.exe]

Originally Posted by Relentless

You probably can, but not many people have looked into that, there needs to be more documentation to set it up etc

For the dmas I’d recommend you guys go with a Squirrel -

Pretty cheap, gets the job done. You could go even cheaper and get a MVP card but they can have flashing issues.

There are two different types of DMs cards 35T and 75T. If you have a good second pc and want as much cheat fps / speeds as possible then go with a 75T they’re around 250$ however. Where as a 35T is around 150$.

Your 2nd pc will almost always want to have a CPU with AVX2 support (I’m pretty sure all intel cpus above generation 6 have it). Also your 2nd pc wants to have the best usb support possible 3.0 MINIMUM, 3.2 is recommended, but even better is a thunderbolt port. This will increase speeds drastically.

this is perfect for 2nd pc = dell optiplex 3050 mini pc 100$

[Ant599]

Originally Posted by lightningZDMA

Still need two computers (one computer is also fine, but why use DMA if only one computer is used)ne for gaming, the other for running cheese. DMA is installed in the PCIe slot of the motherboard of the gaming computer, and then connected to the second computer (running cheese) via a data cable.
The gaming computer needs to have a PCIe slot for installing DMA, and the second computer needs to support USB 3.0 and have decent configuration, usually recommended to use a CPU above i5 6500 and 8GB of memory.

In addition to FUSER, there is actually a free option called moonlight/parsec that can achieve secure ESP effects (requires CHEESE support). It requires a gigabit network support between your two computers, and the latency may be slightly higher compared to FUSER

Where can i get more information on that because I'm interested and playing Fortnite and my cod account is already ban

[Lalo Salamanca]

Originally Posted by Relentless

You probably can, but not many people have looked into that, there needs to be more documentation to set it up etc

Yeah its just what i personally use its fairly simple to do but ofc some methods are easier than others.

[godsp33ds]

Originally Posted by greener.exe

this is perfect for 2nd pc = dell optiplex 3050 mini pc 100$

are you saying for a 2nd PC the "Dell OptiPlex 3050 Micro Business Desktop (Intel Core 7th Generation i3-7100T, 8GB DDR4, 128GB SSD)" would suffice?

[DirectMemory]

This "guide" was stolen from my FAQ tutorial,that I wrote on a DirectDma server...

[greener.exe]

Originally Posted by Jozxc

This "guide" was stolen from my FAQ tutorial,that I wrote on a DirectDma server...

Yes it indeed was copy pasted from there. Great observation , it's also common sense nor a reason for me to rewrite in my own words your master direct did not mind

[Lazrade]

What firmware should I get? And if I’ve already gotten a 24 hour ban from EAC am I toast?

[teslatx]

Originally Posted by Lazrade

What firmware should I get? And if I’ve already gotten a 24 hour ban from EAC am I toast?

In this case you need a spoofer.

[Crimzeyy]

Originally Posted by Lalo Salamanca

Yeah its just what i personally use its fairly simple to do but ofc some methods are easier than others.

could you give me a hand with the ndi method? not sure how you have it setup

[Relentless]

Update:

Kmbox B+ Pro has had bans in Fortnite.
I suggest swapping to the net or an arduino