IzC's AIO For CO!

[puky]

how I can download this bot pliz help me

[Mr.Pringles]

Hey,

another update about my experience with your bot


version 4 worked perfectly for me!

But... :s

Since i downloaded (and opened) version 5, i got a strange thing going on:
1. I open the helper.exe file
2. I can see the names of my online chars for about 1 sec
3. the names disappear and the [Conquer2.0] in my task bar changes to the name of my char...
4. i can't run your bot anymore :s


my solution:
1. load the helper.exe file
2. manually edit the bot.ini file - change the LastUsed option (luckily I already had some paths stored)
3. manually open the bot.exe file
4. bot starts working like a charm...


Hope this info helps you in fine tuning your bot.


Keep up the good work mate!! I'm enjoying it very much


Kind regards

[Azothoras]

Originally Posted by puky

how I can download this bot pliz help me

Are you serious?

Originally Posted by Mr.Pringles

Hey,

another update about my experience with your bot


version 4 worked perfectly for me!

But... :s

Since i downloaded (and opened) version 5, i got a strange thing going on:
1. I open the helper.exe file
2. I can see the names of my online chars for about 1 sec
3. the names disappear and the [Conquer2.0] in my task bar changes to the name of my char...
4. i can't run your bot anymore :s


my solution:
1. load the helper.exe file
2. manually edit the bot.ini file - change the LastUsed option (luckily I already had some paths stored)
3. manually open the bot.exe file
4. bot starts working like a charm...


Hope this info helps you in fine tuning your bot.


Keep up the good work mate!! I'm enjoying it very much


Kind regards

Hmmm... This might be a bug with the window finding feature... If you have a window opened that is called [Conquer2.0] but is not a conquer window or a conquer window that is not logged in.

So if you have a window open but not a char logged in with any CO window this will happen... If you don't have an unlogged CO window then please tell me and I will have a look at it

I'm saying this with confidence because between version 4 and 5 I didn't change ANYTHING whatsoever with the window finding function hehe.

[Azothoras]

Originally Posted by exoverex

Hmm, but why it doesnt hit mobs?

New mob health color chooser... Easier/better!

Originally Posted by Mr.Pringles

Hey,

another update about my experience with your bot


version 4 worked perfectly for me!

But... :s

Since i downloaded (and opened) version 5, i got a strange thing going on:
1. I open the helper.exe file
2. I can see the names of my online chars for about 1 sec
3. the names disappear and the [Conquer2.0] in my task bar changes to the name of my char...
4. i can't run your bot anymore :s


my solution:
1. load the helper.exe file
2. manually edit the bot.ini file - change the LastUsed option (luckily I already had some paths stored)
3. manually open the bot.exe file
4. bot starts working like a charm...


Hope this info helps you in fine tuning your bot.


Keep up the good work mate!! I'm enjoying it very much


Kind regards

Fixed in new version....








New version!

Moonbox Map Viewer!
Better/Easier mob health bar chooser... (Last one was buggy)

Bug Fixes...

[sallysmom]

So the hunter works good (it's a little greedy when it comes to gold.)

But, how does the ArcherLab work? You didn't mention anything about that yet, I don't think, and I'm trying to test it out. It sits and flies fine, but it never selects scatter as the skill even though I have it set to the right F key. It also never uses scatter, even after playing with the archer and mouse button setups and I select scatter for it.

Usually what it does is sit, fly, and then move SW until it hits a wall, even with mobs all around it and the health bar for the mob finder is set. Eventually, at about 10 seconds on the fly time, it will start shooting a mob, but it still doesn't scatter. I've toggled and triple checked about as many settings as I can, I'm not having any luck.

So, when you said it uses coordinates to know where it is, did you mean I have to set up a sit coordinate and a mob group coordinate for a path? I tried and it didn't work. Or did you mean you gave it a certain set of coordinates to use, and I need to go to the right spot? Because even with a path all it wants to do is go SW until about 10 seconds left... So if I'm just in the wrong spot for the archer lab bot, can you tell me the floor and the coordinates you made it work on?

[Mr.Pringles]

Hi again,


I tested the new version (6) and indeed the window finding feature is fixed Tnx a lot


cheers mate!


Oh, btw, I got a little question: I don't know if its possible, but, when i run your bot and my char gets disconnected for whatever raeson, the bot starts acting very weird. It still takes over my mouse, and pressing 'insert' doesn't help.

Do you got any tips on how to stop the bot when that happens? or is it possible to add a function that the bots stop whenever the char gets disconnected?

just wondering...

[Azothoras]

Originally Posted by sallysmom

So the hunter works good (it's a little greedy when it comes to gold.)

But, how does the ArcherLab work? You didn't mention anything about that yet, I don't think, and I'm trying to test it out. It sits and flies fine, but it never selects scatter as the skill even though I have it set to the right F key. It also never uses scatter, even after playing with the archer and mouse button setups and I select scatter for it.

Usually what it does is sit, fly, and then move SW until it hits a wall, even with mobs all around it and the health bar for the mob finder is set. Eventually, at about 10 seconds on the fly time, it will start shooting a mob, but it still doesn't scatter. I've toggled and triple checked about as many settings as I can, I'm not having any luck.

So, when you said it uses coordinates to know where it is, did you mean I have to set up a sit coordinate and a mob group coordinate for a path? I tried and it didn't work. Or did you mean you gave it a certain set of coordinates to use, and I need to go to the right spot? Because even with a path all it wants to do is go SW until about 10 seconds left... So if I'm just in the wrong spot for the archer lab bot, can you tell me the floor and the coordinates you made it work on?

You don't have to setup a path there's a preset path in the actuall bot... I will look in to all of this....

As for the search for mob etc... It doesn't matter because when the bot uses scatter it doesn't search for mobs it just right click

It's at the first floor archer spawn... Not just any spawn but the archer spawn. There's only one of those (There might be many spawns but only one real archer spawn)

About the greedy gold thing yea I can't do anything about this... So I recommend not to have it pick up gold unless you're alone at the spawn.

But as I said I will look into this.

Originally Posted by Mr.Pringles

Hi again,

I tested the new version (6) and indeed the window finding feature is fixed Tnx a lot


cheers mate!


Oh, btw, I got a little question: I don't know if its possible, but, when i run your bot and my char gets disconnected for whatever raeson, the bot starts acting very weird. It still takes over my mouse, and pressing 'insert' doesn't help.

Do you got any tips on how to stop the bot when that happens? or is it possible to add a function that the bots stop whenever the char gets disconnected?

just wondering...

"Delete" key will stop the bot better than insert actually... Perhaps I forgot to mention that in my first post (sorry)

As for the auto stop when disconnected... I have NO idea how to get the bot to know if a char disconnects... I've tried but all memories etc stay they same when you disconnect etc. (Really annoying)

[LsJDM]

Bout to try this out=]

[IKillBabies]

When you get all the errors worked out, I think I am really going to enjoy this. Thanks for putting in all the time and effort. And not making us pay like CIDProxy does now. Er '5bot'.

Oh and, download link doesn't wanna work for me for some reason... maybe try doing two different mirrors?

[Azothoras]

Originally Posted by IKillBabies

When you get all the errors worked out, I think I am really going to enjoy this. Thanks for putting in all the time and effort. And not making us pay like CIDProxy does now. Er '5bot'.

Oh and, download link doesn't wanna work for me for some reason... maybe try doing two different mirrors?

Ty... Though there arn't many errors left actually most problems people get is because they havn't read my first post and havn't set it up correctly... hehe

[Mr.Pringles]

Originally Posted by Azothoras

"Delete" key will stop the bot better than insert actually... Perhaps I forgot to mention that in my first post (sorry)

As for the auto stop when disconnected... I have NO idea how to get the bot to know if a char disconnects... I've tried but all memories etc stay they same when you disconnect etc. (Really annoying)

Hehe, well "delete" it is...
and erm... there's absolutely no need to say sorry

about the dc thingy, nvm about it, i should just try combining your bot with an auto reconnect tool.

tnx a lot for the help and effort put into this

[sarkec]

this is the best pixel bot i've ever seen,congratz and tyvm

[Azothoras]

Originally Posted by Mr.Pringles

Hehe, well "delete" it is...
and erm... there's absolutely no need to say sorry

about the dc thingy, nvm about it, i should just try combining your bot with an auto reconnect tool.

tnx a lot for the help and effort put into this

Ty for you support!
If you find a reconnect tool that works please link me to it hehe

Originally Posted by sarkec

this is the best pixel bot i've ever seen,congratz and tyvm

Ty!

[Tamago!]

hi

u stated "It's highly recommended that you only have one conquer client open while running this program"

so what will happen if i open more than 1 client?
i intend to use for plvl purpose so i need to open more than one.

[RitechD]

thanks alot.... this really works great for me....