Need help with fuser!

Running into an issue where my 2nd monitor is locked at 60hz with the fuser even though its a 165hz monitor so when i overlay with fuser my main monitor looks like crap

Quote:

Originally Posted by Lazy210 Running into an issue where my 2nd monitor is locked at 60hz with the fuser even though its a 165hz monitor so when i overlay with fuser my main monitor looks like crap

On "Radar" pc, make sure you set the refresh rate of the fuser display via display settings on that machine, it will show up as a second monitor. Then make sure you set the mode via the remote that came with your fuser. Also make sure the window on your "Game" pc is set to the correct refresh rate.

Quote:

Originally Posted by SyntheticSkill On "Radar" pc, make sure you set the refresh rate of the fuser display via display settings on that machine, it will show up as a second monitor. Then make sure you set the mode via the remote that came with your fuser. Also make sure the window on your "Game" pc is set to the correct refresh rate.

I did already i set both pc to 144hz and when i check fuser its locked to 60hz it wont let me change it over 60hz i can only go down from there not up. Someone told me they both have to be the same resolution since my main game monitor is 1440p and my 2nd monitor is 1080p

Quote:

Originally Posted by Lazy210 I did already i set both pc to 144hz and when i check fuser its locked to 60hz it wont let me change it over 60hz i can only go down from there not up. Someone told me they both have to be the same resolution since my main game monitor is 1440p and my 2nd monitor is 1080p

The display resolutions have to match in windows yes, so for example if you are trying to achieve 1440p 144hz, make sure the "display" (fuser window) shown on your Radar pc is set to 1440p 144z. Then do the same on your Game pc.

You need to make sure you are pressing 2k 144hz on your fuser remote, these remotes do not get delivered with batteries, so make sure you put a battery in it.

Quote:

Originally Posted by SyntheticSkill The display resolutions have to match in windows yes, so for example if you are trying to achieve 1440p 144hz, make sure the "display" (fuser window) shown on your Radar pc is set to 1440p 144z. Then do the same on your Game pc. You need to make sure you are pressing 2k 144hz on your fuser remote, these remotes do not get delivered with batteries, so make sure you put a battery in it.

My fuser didn't come with a remote its a dichen so when i press k1 i can see the main pc monitor go to 2560x1440 144hz but hdmi 2 is only 1080 60hz. When i try setting resolution in display for fuser it only shows 1080 not 1440p and up to 60hz even if i try forcing it through nivida control panel

Quote:

Originally Posted by Lazy210 Running into an issue where my 2nd monitor is locked at 60hz with the fuser even though its a 165hz monitor so when i overlay with fuser my main monitor looks like crap

Hey bro you have Dichen fuser and I sell this variant: I recommend making sure you got 3 HDMI cables and they all support HDMI 2.0+. Next step would be injecting a edid or cycling through K1 until you get the desired resolution. If you want full compatibility injecting the EDID with DC injector tool is best scenario (after you inject EDID with the USB c don't press K1). Join my discord and create a ticket if you want extra support, we got a few guys on today. :)

Quote:

Originally Posted by Ducks Services Hey bro you have Dichen fuser and I sell this variant: I recommend making sure you got 3 HDMI cables and they all support HDMI 2.0+. Next step would be injecting a edid or cycling through K1 until you get the desired resolution. If you want full compatibility injecting the EDID with DC injector tool is best scenario (after you inject EDID with the USB c don't press K1). Join my discord and create a ticket if you want extra support, we got a few guys on today. :)

I appreciate the info i do have 3 hdmi cables that support HDMI 2.0+ and i did do the EDID yesterday the fuser appears with the same name as my main monitor now but still stuck at 1080 60fps on HDMI2. Also am i suppose to duplicate both screen (2nd pc/fuser) or just have them as monitor 1 and 2?

Quote:

Originally Posted by Lazy210 I appreciate the info i do have 3 hdmi cables that support HDMI 2.0+ and i did do the EDID yesterday the fuser appears with the same name as my main monitor now but still stuck at 1080 60fps on HDMI2. Also am i suppose to duplicate both screen (2nd pc/fuser) or just have them as monitor 1 and 2?

Gaming PC windows display settings:-
(Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display)

Radar PC windows display settings:-
(Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display)


"Display Settings" (Windows Settings for each PC)
Please make sure to also check advanced display settings and select the correct hertz and resolution output for the fuser display .

If still stuck on 60hz on both pcs make sure when saving the edid you used a HDMI cable and set hz to max before saving. Make sure 2nd pc --> main monitor can handle above 60HZ too without fuser involved.

Quote:

Originally Posted by Ducks Services Gaming PC windows display settings:- (Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display) Radar PC windows display settings:- (Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display) "Display Settings" (Windows Settings for each PC) Please make sure to also check advanced display settings and select the correct hertz and resolution output for the fuser display . If still stuck on 60hz on both pcs make sure when saving the edid you used a HDMI cable and set hz to max before saving. Make sure 2nd pc --> main monitor can handle above 60HZ too without fuser involved.

See i don't have the fuser option to extend display on gaming pc only on radar pc. When i go to envidia control panel and try setting fuser to 1440p 144hz it kicks me out like if fuser resets and doesnt accept the resolution. Then on windows advanced display options for fuser its only 1080p 60hz i can't go above that at all

Quote:

Originally Posted by Ducks Services Gaming PC windows display settings:- (Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display) Radar PC windows display settings:- (Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display) "Display Settings" (Windows Settings for each PC) Please make sure to also check advanced display settings and select the correct hertz and resolution output for the fuser display . If still stuck on 60hz on both pcs make sure when saving the edid you used a HDMI cable and set hz to max before saving. Make sure 2nd pc --> main monitor can handle above 60HZ too without fuser involved.

How do i set max hz when doing the EDID? I thought it was just selecting the resolution and thats it

Sent some more info via DM :) (If others need help feel free to reach out)

i have this same question "How do i set max hz when doing the EDID? I thought it was just selecting the resolution and thats it"

I'm having the same issue.

Did anyone solve this problem? Fuser forcing me into 1080p no matter what.

I tried everything. New Nvidia drivers, old drivers from 2024, fresh windows install, forced 2560x1440 resolution. Using one monitor, trying 2 others.

The fuser's K1 button does not cycle through resolutions. Just displays 1920x1080x60 on every click.

Anyone?

Can you help me I’m in the same boat

Quote:

Originally Posted by Daom Did anyone solve this problem? Fuser forcing me into 1080p no matter what. I tried everything. New Nvidia drivers, old drivers from 2024, fresh windows install, forced 2560x1440 resolution. Using one monitor, trying 2 others. The fuser's K1 button does not cycle through resolutions. Just displays 1920x1080x60 on every click. Anyone?

What kind of monitor do you have? Regular 2560x1440 ips panel + what brand?