Hello everyone, i m learning how to read memory and how to use cheat engine.
My goal is to Create an awesome bot for florensia that doesn t use "pixelsearch" to "understand things" thats the reason why i m studing Cheat Engine.
Now I will explain my problem.
to start I looked for the HP value and performed a PointerScan of the address over and over again restarting the game several times, and finally find the Pointer of the HP
[Only registered and activated users can see links. Click Here To Register...]
this pointer is correct infact if i restart the game over and over and attach the process it always show the correct value of HP.
I m using AutoIt for Scripting and that is my code:
And that is the Include for the Memory Reading by Nomad:
There is surely something wrong with my code, but lacking in experience I can't solve my problem.
For some reason it return 0 instead of 3447
[Only registered and activated users can see links. Click Here To Register...]
My question is..
How can i read the Pointer Value with Autoit? Where am I doing wrong? can someone help me? :handsdown:
----EDIT 21/08/2020----
Solved! i found the solution~
My goal is to Create an awesome bot for florensia that doesn t use "pixelsearch" to "understand things" thats the reason why i m studing Cheat Engine.
Now I will explain my problem.
to start I looked for the HP value and performed a PointerScan of the address over and over again restarting the game several times, and finally find the Pointer of the HP
[Only registered and activated users can see links. Click Here To Register...]
this pointer is correct infact if i restart the game over and over and attach the process it always show the correct value of HP.
I m using AutoIt for Scripting and that is my code:
Code:
#RequireAdmin
Opt("WinTitleMatchMode", 4)
WinActivate("ClassName=Florensia")
Global $ProcessID = WinGetProcess("ClassName=Florensia","")
If $ProcessID = -1 Then
MsgBox(4096, "ERROR", "Failed to detect process.")
Exit
EndIf
$currenthp = Current_HP ()
Func Current_HP ()
Local $DllInformation = _MemoryOpen($ProcessID)
If [MENTION=2544426]Error T[/MENTION]hen
MsgBox(4096, "ERROR", "Failed to open memory.")
Exit
EndIf
Local $Value, $Pointer_1
Local $Offset1 = 60
Local $Offset2 = 10
local $Handle = _MemoryOpen($ProcessID)
local $Address = 0x10D18950
Local $base = 0x007BA63C
$Value = _MemoryRead($base + $Address, $DllInformation)
If [MENTION=2544426]Error T[/MENTION]hen
MsgBox(4096, "ERROR", "Failed to read memory.")
Exit
EndIf
$Pointer_1 = '0x' & hex($Value + $Offset1 + $Offset2)
$Value = _MemoryRead($Pointer_1, $DllInformation)
_MemoryClose($DllInformation)
If [MENTION=2544426]Error T[/MENTION]hen
MsgBox(4096, "ERROR", "Failed to close memory.")
Exit
EndIf
Return $Value
EndFunc
MsgBox(0,"",$currenthp) ; <=== should be 3447 but it return 0
Code:
;#include-once
#region _Memory
;=================================================================================================
; AutoIt Version: 3.1.127 (beta)
; Language: English
; Platform: All Windows
; Author: Nomad
; Requirements: These functions will only work with beta.
;=================================================================================================
; Credits: wOuter - These functions are based on his original _Mem() functions. But they are
; easier to comprehend and more reliable. These functions are in no way a direct copy
; of his functions. His functions only provided a foundation from which these evolved.
;=================================================================================================
;
; Functions:
;
;=================================================================================================
; Function: _MemoryOpen($iv_Pid[, $iv_DesiredAccess[, $iv_InheritHandle]])
; Description: Opens a process and enables all possible access rights to the process. The
; Process ID of the process is used to specify which process to open. You must
; call this function before calling _MemoryClose(), _MemoryRead(), or _MemoryWrite().
; Parameter(s): $iv_Pid - The Process ID of the program you want to open.
; $iv_DesiredAccess - (optional) Set to 0x1F0FFF by default, which enables all
; possible access rights to the process specified by the
; Process ID.
; $if_InheritHandle - (optional) If this value is TRUE, all processes created by
; this process will inherit the access handle. Set to TRUE
; (1) by default. Set to 0 if you want it to be FALSE.
; Requirement(s): A valid process ID.
; Return Value(s): On Success - Returns an array containing the Dll handle and an open handle to
; the specified process.
; On Failure - Returns 0
; [MENTION=299637]ErRoR[/MENTION] - 0 = No error.
; 1 = Invalid $iv_Pid.
; 2 = Failed to open Kernel32.dll.
; 3 = Failed to open the specified process.
; Author(s): Nomad
; Note(s):
;=================================================================================================
Func _MemoryOpen($iv_Pid, $iv_DesiredAccess = 0x1F0FFF, $if_InheritHandle = 1)
If Not ProcessExists($iv_Pid) Then
SetError(1)
Return 0
EndIf
Local $ah_Handle[2] = [DllOpen('kernel32.dll')]
If [MENTION=2544426]Error T[/MENTION]hen
SetError(2)
Return 0
EndIf
Local $av_OpenProcess = DllCall($ah_Handle[0], 'int', 'OpenProcess', 'int', $iv_DesiredAccess, 'int', $if_InheritHandle, 'int', $iv_Pid)
If [MENTION=2544426]Error T[/MENTION]hen
DllClose($ah_Handle[0])
SetError(3)
Return 0
EndIf
$ah_Handle[1] = $av_OpenProcess[0]
Return $ah_Handle
EndFunc
;=================================================================================================
; Function: _MemoryRead($iv_Address, $ah_Handle[, $sv_Type])
; Description: Reads the value located in the memory address specified.
; Parameter(s): $iv_Address - The memory address you want to read from. It must be in hex
; format (0x00000000).
; $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $sv_Type - (optional) The "Type" of value you intend to read. This is set to
; 'dword'(32bit(4byte) signed integer) by default. See the help file
; for DllStructCreate for all types.
; An example: If you want to read a word that is 15 characters in
; length, you would use 'char[16]'.
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns the value located at the specified address.
; On Failure - Returns 0
; [MENTION=299637]ErRoR - 0 = No error.
; 1 = Invalid $ah_Handle.
; 2 = $sv_Type was not a string.
; 3 = $sv_Type is an unknown data type.
; 4 = Failed to allocate the memory needed for the DllStructure.
; 5 = Error allocating memory for $sv_Type.
; 6 = Failed to read from the specified process.
; Author(s): Nomad
; Note(s): Values returned are in Decimal format, unless specified as a 'char' type, then
; they are returned in ASCII format. Also note that size ('char[size]') for all
; 'char' types should be 1 greater than the actual size.
;=================================================================================================
Func _MemoryRead($iv_Address, $ah_Handle, $sv_Type = 'dword')
If Not IsArray($ah_Handle) Then
SetError(1)
Return 0
EndIf
Local $v_Buffer = DllStructCreate($sv_Type)
If [MENTION=2544426]Error T[/MENTION]hen
SetError [MENTION=299637]ErRoR[/MENTION] + 1)
Return 0
EndIf
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If Not [MENTION=2544426]Error T[/MENTION]hen
Local $v_Value = DllStructGetData($v_Buffer, 1)
Return $v_Value
Else
SetError(6)
Return 0
EndIf
EndFunc
;=================================================================================================
; Function: _MemoryWrite($iv_Address, $ah_Handle, $v_Data[, $sv_Type])
; Description: Writes data to the specified memory address.
; Parameter(s): $iv_Address - The memory address you want to write to. It must be in hex
; format (0x00000000).
; $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $v_Data - The data to be written.
; $sv_Type - (optional) The "Type" of value you intend to write. This is set to
; 'dword'(32bit(4byte) signed integer) by default. See the help file
; for DllStructCreate for all types.
; An example: If you want to write a word that is 15 characters in
; length, you would use 'char[16]'.
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns 1
; On Failure - Returns 0
; [MENTION=299637]ErRoR - 0 = No error.
; 1 = Invalid $ah_Handle.
; 2 = $sv_Type was not a string.
; 3 = $sv_Type is an unknown data type.
; 4 = Failed to allocate the memory needed for the DllStructure.
; 5 = Error allocating memory for $sv_Type.
; 6 = $v_Data is not in the proper format to be used with the "Type"
; selected for $sv_Type, or it is out of range.
; 7 = Failed to write to the specified process.
; Author(s): Nomad
; Note(s): Values sent must be in Decimal format, unless specified as a 'char' type, then
; they must be in ASCII format. Also note that size ('char[size]') for all
; 'char' types should be 1 greater than the actual size.
;=================================================================================================
Func _MemoryWrite($iv_Address, $ah_Handle, $v_Data, $sv_Type = 'dword')
If Not IsArray($ah_Handle) Then
SetError(1)
Return 0
EndIf
Local $v_Buffer = DllStructCreate($sv_Type)
If [MENTION=2544426]Error T[/MENTION]hen
SetError [MENTION=299637]ErRoR[/MENTION] + 1)
Return 0
Else
DllStructSetData($v_Buffer, 1, $v_Data)
If [MENTION=2544426]Error T[/MENTION]hen
SetError(6)
Return 0
EndIf
EndIf
DllCall($ah_Handle[0], 'int', 'WriteProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If Not [MENTION=2544426]Error T[/MENTION]hen
Return 1
Else
SetError(7)
Return 0
EndIf
EndFunc
;=================================================================================================
; Function: _MemoryClose($ah_Handle)
; Description: Closes the process handle opened by using _MemoryOpen().
; Parameter(s): $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns 1
; On Failure - Returns 0
; [MENTION=299637]ErRoR - 0 = No error.
; 1 = Invalid $ah_Handle.
; 2 = Unable to close the process handle.
; Author(s): Nomad
; Note(s):
;=================================================================================================
Func _MemoryClose($ah_Handle)
If Not IsArray($ah_Handle) Then
SetError(1)
Return 0
EndIf
DllCall($ah_Handle[0], 'int', 'CloseHandle', 'int', $ah_Handle[1])
If Not [MENTION=2544426]Error T[/MENTION]hen
DllClose($ah_Handle[0])
Return 1
Else
DllClose($ah_Handle[0])
SetError(2)
Return 0
EndIf
EndFunc
;=================================================================================================
; Function: _MemoryPointerRead ($iv_Address, $ah_Handle, $av_Offset[, $sv_Type])
; Description: Reads a chain of pointers and returns an array containing the destination
; address and the data at the address.
; Parameter(s): $iv_Address - The static memory address you want to start at. It must be in
; hex format (0x00000000).
; $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $av_Offset - An array of offsets for the pointers. Each pointer must have an
; offset. If there is no offset for a pointer, enter 0 for that
; array dimension.
; $sv_Type - (optional) The "Type" of data you intend to read at the destination
; address. This is set to 'dword'(32bit(4byte) signed integer) by
; default. See the help file for DllStructCreate for all types.
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns an array containing the destination address and the value
; located at the address.
; On Failure - Returns 0
; [MENTION=299637]ErRoR - 0 = No error.
; 1 = $av_Offset is not an array.
; 2 = Invalid $ah_Handle.
; 3 = $sv_Type is not a string.
; 4 = $sv_Type is an unknown data type.
; 5 = Failed to allocate the memory needed for the DllStructure.
; 6 = Error allocating memory for $sv_Type.
; 7 = Failed to read from the specified process.
; Author(s): Nomad
; Note(s): Values returned are in Decimal format, unless a 'char' type is selected.
; Set $av_Offset like this:
; $av_Offset[0] = NULL (not used)
; $av_Offset[1] = Offset for pointer 1 (all offsets must be in Decimal)
; $av_Offset[2] = Offset for pointer 2
; etc...
; (The number of array dimensions determines the number of pointers)
;=================================================================================================
Func _MemoryPointerRead ($iv_Address, $ah_Handle, $av_Offset, $sv_Type = 'dword')
If IsArray($av_Offset) Then
If IsArray($ah_Handle) Then
Local $iv_PointerCount = UBound($av_Offset) - 1
Else
SetError(2)
Return 0
EndIf
Else
SetError(1)
Return 0
EndIf
Local $iv_Data[2], $i
Local $v_Buffer = DllStructCreate('dword')
For $i = 0 to $iv_PointerCount
If $i = $iv_PointerCount Then
$v_Buffer = DllStructCreate($sv_Type)
If [MENTION=2544426]Error T[/MENTION]hen
SetError [MENTION=299637]ErRoR[/MENTION] + 2)
Return 0
EndIf
$iv_Address = '0x' & hex($iv_Data[1] + $av_Offset[$i])
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If [MENTION=2544426]Error Then
SetError(7)
Return 0
EndIf
$iv_Data[1] = DllStructGetData($v_Buffer, 1)
ElseIf $i = 0 Then
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If [MENTION=2544426]Error T[/MENTION]hen
SetError(7)
Return 0
EndIf
$iv_Data[1] = DllStructGetData($v_Buffer, 1)
Else
$iv_Address = '0x' & hex($iv_Data[1] + $av_Offset[$i])
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If [MENTION=2544426]Error T[/MENTION]hen
SetError(7)
Return 0
EndIf
$iv_Data[1] = DllStructGetData($v_Buffer, 1)
EndIf
Next
$iv_Data[0] = $iv_Address
Return $iv_Data
EndFunc
;=================================================================================================
; Function: _MemoryPointerWrite ($iv_Address, $ah_Handle, $av_Offset, $v_Data[, $sv_Type])
; Description: Reads a chain of pointers and writes the data to the destination address.
; Parameter(s): $iv_Address - The static memory address you want to start at. It must be in
; hex format (0x00000000).
; $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $av_Offset - An array of offsets for the pointers. Each pointer must have an
; offset. If there is no offset for a pointer, enter 0 for that
; array dimension.
; $v_Data - The data to be written.
; $sv_Type - (optional) The "Type" of data you intend to write at the destination
; address. This is set to 'dword'(32bit(4byte) signed integer) by
; default. See the help file for DllStructCreate for all types.
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns the destination address.
; On Failure - Returns 0.
; [MENTION=299637]ErRoR - 0 = No error.
; 1 = $av_Offset is not an array.
; 2 = Invalid $ah_Handle.
; 3 = Failed to read from the specified process.
; 4 = $sv_Type is not a string.
; 5 = $sv_Type is an unknown data type.
; 6 = Failed to allocate the memory needed for the DllStructure.
; 7 = Error allocating memory for $sv_Type.
; 8 = $v_Data is not in the proper format to be used with the
; "Type" selected for $sv_Type, or it is out of range.
; 9 = Failed to write to the specified process.
; Author(s): Nomad
; Note(s): Data written is in Decimal format, unless a 'char' type is selected.
; Set $av_Offset like this:
; $av_Offset[0] = NULL (not used, doesn't matter what's entered)
; $av_Offset[1] = Offset for pointer 1 (all offsets must be in Decimal)
; $av_Offset[2] = Offset for pointer 2
; etc...
; (The number of array dimensions determines the number of pointers)
;=================================================================================================
Func _MemoryPointerWrite ($iv_Address, $ah_Handle, $av_Offset, $v_Data, $sv_Type = 'dword')
If IsArray($av_Offset) Then
If IsArray($ah_Handle) Then
Local $iv_PointerCount = UBound($av_Offset) - 1
Else
SetError(2)
Return 0
EndIf
Else
SetError(1)
Return 0
EndIf
Local $iv_StructData, $i
Local $v_Buffer = DllStructCreate('dword')
For $i = 0 to $iv_PointerCount
If $i = $iv_PointerCount Then
$v_Buffer = DllStructCreate($sv_Type)
If [MENTION=2544426]Error T[/MENTION]hen
SetError [MENTION=299637]ErRoR + 3)
Return 0
EndIf
DllStructSetData($v_Buffer, 1, $v_Data)
If [MENTION=2544426]Error T[/MENTION]hen
SetError(8)
Return 0
EndIf
$iv_Address = '0x' & hex($iv_StructData + $av_Offset[$i])
DllCall($ah_Handle[0], 'int', 'WriteProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If [MENTION=2544426]Error T[/MENTION]hen
SetError(9)
Return 0
Else
Return $iv_Address
EndIf
ElseIf $i = 0 Then
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If [MENTION=2544426]Error T[/MENTION]hen
SetError(3)
Return 0
EndIf
$iv_StructData = DllStructGetData($v_Buffer, 1)
Else
$iv_Address = '0x' & hex($iv_StructData + $av_Offset[$i])
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If [MENTION=2544426]Error T[/MENTION]hen
SetError(3)
Return 0
EndIf
$iv_StructData = DllStructGetData($v_Buffer, 1)
EndIf
Next
EndFunc
#endregion
For some reason it return 0 instead of 3447
[Only registered and activated users can see links. Click Here To Register...]
My question is..
How can i read the Pointer Value with Autoit? Where am I doing wrong? can someone help me? :handsdown:
----EDIT 21/08/2020----
Solved! i found the solution~