[Release] Impulse Resurgence Bot **No bypass required (Updated 12/21)

...................Error is when the program will complain about RIGHTX32.OCX not being installed/found... whatever.

Steps to Solve :
- Open the Impulse Directory.
- Double Click on "SetupOCX.exe". The following form will appear.
[Only registered and activated users can see links. Click Here To Register...]
- Read the "Alert" section and follow whatever steps apply.
- Click the "Setup" button.
- A lovely box letting you know that the task has succeeded will appear. Just click 'OK'

Windows Vista / Windows 7 / Windows 8
- The lovely box letting you know the task has been completed may be minimised.
- After clicking 'OK' on the lovely box, you may have another box appear asking if the program was installed correctly. Just say yes. :)

NOTE: If you change the location of the Bot (e.g. move the Bot folder from my documents to the desktop) you will have to redo this process.

A Usefull Video By TheConArtist

Introduction
To open the forms you need to 'Right Click' on the form button. To start or stop the Bot you would need to 'Left Click' the button. E.g. Right click 'Script Bot' to load the form, Left Click it to start the script.

Here I will give a brief description on how each section works. For these examples I am assuming you have both the Bot and the game open and are logged into the game looking at your character standing in a map.
[Only registered and activated users can see links. Click Here To Register...]

Skill Bot
[Only registered and activated users can see links. Click Here To Register...]
This will target monsters and attack them. This does not move your character... just spams skills.
If a button looks white/grey then that button has been pushed.
- Select the skills to spam by pushing the appropriate buttons down. In the picture above I have set the Skill Bot to spam skills 1-5.
- If you have the 'Normal' button pushed down you will double click the monster to constantly attack it white spamming skills.
- If you have the 'Target' button pushed down you will target new monsters.
- 'Target Delay' is how often you will target a new monster. To change this value, check the checkbox to the right of the value and move the scroll bar up and down. This is measured in milliseconds (1000ms = 1 second).
- 'Skill Delay' is how quick you will spam skills. In the example above I have set this to 100 which means there will be a 100ms delay between each skill. To change this value, check the checkbox to the right of the value and move the scroll bar up and down. This is measured in milliseconds (1000ms = 1 second).
- Click the 'Done' button to close the form.
- 'Left Click' on the 'Skill Bot' button, it will turn green and the skill Bot will start.

Pot Bot
[Only registered and activated users can see links. Click Here To Register...]
This is designed to potion your character when you’re Health/Mana gets low.
- Select what spot your potion is in. In Dekarons case it is one of the F1-F6 keys. In the picture above key F1 is selected for hp pots.
- Make sure you have a full hp bar and click the set spot button. Then click your potion bar where you want it to potion when your health gets low. For me I have this about 60% up the health bar.
- Do the same for mp potions making sure the key you select is where your potion is placed and you’re done.
- You can save these details as a file using the 'Save' button and alternatively load details using the 'Load' button.
- Click 'Done' and the form will disappear. You can start the ‘Pot Bot’ by 'Left Clicking' the Pot Bot button on the main form.

Loot Bot
[Only registered and activated users can see links. Click Here To Register...]
This will pick up items from the floor. The delay value is how often it will try to pick up loot (press the space bar). The delay value is measured in milliseconds so 1000 delay = 1 second delay.
- To change the delay simply use the scroll bar provided.
- Click 'Done' and the form will disappear. To start the 'Loot Bot' 'Left Click' the 'Loot Bot' button on the main form.

Script Bot
[Only registered and activated users can see links. Click Here To Register...]
This is where you can enter your custom scripts. For help with the syntax of the scripts please see the help section of the bot.

When you hear Co-ordinates we are talking about the Position of your mouse on your game. So in example... if i have my game at resolution 1024x768 with my screen at 1920x1080.. the 0;0 co-ordinate would be the top left of my game window(not including title bar). the 0;1024 co-ordinate would be at the top right of the game window. 512;512 would be i the middle of your game screen.
THIS PROGRAM WILL NOT ACCEPT NEGATIVE CO-ORDINATES SO DONT TRY :)
When we hear colors in this tutorial you have to understand that we convert the color into a number. In example the numeric value of yellow is "65535".

- You can save and load your scripts using the 'Save'/'Load' buttons.
- The 'Test' button will start your scripts with the editor open. Click this button again to stop the script. NOTE: if you highlight a section of your script and click 'Test' it will run only what you have highlighted.
- The 'Help' Button will show the help form. Here is your information bank. Can’t remember the syntax of a command... Check here.
- The 'Color' button will simple re-color code your script to make it easier to read.
- The 'Clear' button will clear your script from the editor.
- The 'Get Info' button will return your co-ordinates/colors into the two boxes to the right, Co-ordinates on top and the color on the bottom. Simply click the 'Get Info' button, then click on your game where you want to scan.
- The 'Scan' button will show the scan form. The form that shows is designed to take a small screen shot of a section of your page so you can look for colors/co-ordinates a lot more specific then 'Get Info'. Place the scan form over the section of your screen you want to scan and press the capture button. Click back to your game and it will capture that section. You can then scroll your mouse over this image to view the co-ordinates/colors. This info will be displayed just under the image.

Recorder
[Only registered and activated users can see links. Click Here To Register...]
This will record your key presses into an impulse script.
- Click 'Start' for it to start recording and 'Stop' for it to stop.
- All recorded scripts will be in the Text box above the 'Start' button.
- Pressing the clear button will erase what you have recorded.
- Alternatively you can left click on the 'Recorder' button on the main form to start/stop the recorder.

Timer
[Only registered and activated users can see links. Click Here To Register...]
This will stop your script after a given time.
- Enter how long you want the timer to run for in the boxes at the top of the form.
- If you tick the 'Stop Script' option all bots will be disabled when the timer runs out.
- If you tick the 'Close Impulse' option Impulse Resurgence will close when the timer runs out.
- If you tick the 'Close Game' option Dekaron will close when the timer runs out.
- To start the 'Timer' Click the 'Start' button or Left Click' the 'Loot Bot' button on the main form.
- Clicking the 'Done' button will close the form.

Compact
[Only registered and activated users can see links. Click Here To Register...]
This is a nice neat smaller display of the main page. You can use this to save space on your screen. The buttons work in the same way as the main form.

Keys
[Only registered and activated users can see links. Click Here To Register...]
Looking back at the ‘Skill Bot’, the Bot targeted monsters. The key it presses to target monsters is set here (for Dekaron this is the 'u' key). The Normal key is linked to the normal button in the skill Bot and the loot key is the key it will press to pick up loot in the loot bot.
Little hint... don’t change this. It is setup for Dekaron and doesn’t need to be edited.

Load/Save
You can Save/Load entire Bot settings with these functions. The settings that are saved/loaded are:
- Everything in the 'Skill Bot' form.
- The Loot delay for the 'Loot Bot'.
- Your 'Key' settings.
- What 'Pot Bot' file is loaded by default.
- The position of your forms.