Waypoint Script Problem

Hey Leute,
habe ein Problem mit meinen Script:

Es soll Koordinaten (X,Y,Z) aufnehmen und in einer Datei speichern. Danach liest das Programm die Koordinaten wieder ein. Bis dahin funktioniert alles auch gut, aber dann tritt ein Problem auf:

Das Programm soll nun im Spiel die gespeicherten Koordinaten entlanglaufen. Das funktioniert jedoch nicht, denn mein Charakter dreht sich nur im Kreis.

Ich hoffe, dass ihr den Fehler findet und mir helfen k�nnt.

Hier das Script:
Code:
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <nomadmemory.au3>
#RequireAdmin


Global $wpField[1000]
Global $i =0
Global $countMax=0
Global $Run = False
Global $openmem = 0
global $status
global $rot_down = "a down"
global $rot_up = "a up"
global $pi = 3.14159265358979323846264338327950

#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 311, 122, 192, 124)
$WpsaveInput = GUICtrlCreateInput("", 16, 16, 97, 21)
$Button1 = GUICtrlCreateButton("Button1", 16, 40, 97, 25)
$Wpfileinput = GUICtrlCreateInput("", 176, 16, 89, 21)
$Button2 = GUICtrlCreateButton("Button2", 176, 40, 97, 25)
$Button3 = GUICtrlCreateButton("Button3", 104, 96, 73, 25)
$status = GUICtrlCreateLabel("", 8, 64, 244, 25)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg

        case $Button1
            OpenAionMemory()
            AddWp()

        case $Button2
            readWP()

        case $Button3
            walkPoints()


        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd



Func OpenAionMemory()
    $pid = ProcessExists("AION.bin")
    If $pid == -1 Then
        Return
    EndIf
    $openmem = _MemoryOpen($pid)
    If @error Then
        Return
    EndIf
    $AionRun = True
EndFunc


Func MemReadDLLFloat($offset)
    $StaticOffset = Dec($offset)
    Global $pid
    Global $CUROffset[1]
    $CUROffset[0] = 0
    $baseADDR = _MemoryModuleGetBaseAddress($pid, "Game.dll")
    $finalADDR = "0x" & Hex($baseADDR + $StaticOffset)
    $MemTest = _MemoryRead($finaladdr,$openmem,"float")
    Return $MemTest
EndFunc





Func PlayerXPos()
    return MemReadDLLFloat("BF0A9C")
EndFunc

Func PlayerYPos()
    return MemReadDLLFloat("BF0AA0")
EndFunc

Func PlayerZPos()
    return MemReadDLLFloat("BF0AA4")
EndFunc

Func GetPlayerPos()
    Return MemReadDLLFloat("BECC6C")
EndFunc

Func addWP()

    $playerX = PlayerXPos()
    $playerY = PlayerYPos()
    $playerZ = PlayerZPos()

    $WPFile = "wp"

    $openFile = GuiCtrlRead($wpSaveInput)
    $wpSave = FileOpen($openFile, 1)

    FileWriteLine($wpSave ,Round($playerX,2))
    FileWriteLine($wpSave ,Round($playerY,2))
    FileWriteLine($wpSave ,Round($playerZ,2))
    FileClose($wpSave)
    _toolTip("WayPoint: "&Round($playerX,0)&" - "&Round($playerY,0)&" - "&Round($playerZ,0)&" added")
EndFunc

Func readWP()
    $countMax=0
    $count = 1
    $openFile = GuiCtrlRead($wpFileInput)
    $readWPfile = FileOpen($openFile, 0)

    While 1
        $x1 = FileReadLine($readWPfile,$count)

        if $x1 = "" Then
            $count = 1
            ExitLoop
        EndIf

        If @error = -1 Then    ExitLoop
        $count = $count +1
        $countMax = $countMax +1
        $x2 = FileReadLine($readWPfile,$count)
        $count = $count +1
        $countMax = $countMax +1
        $x3 = FileReadLine($readWPfile,$count)
        $count = $count +1
        $countMax = $countMax +1


    Wend
    FileClose($readWPfile)


    $openFile = GuiCtrlRead($wpFileInput)
    $readWPfile = FileOpen($openFile, 0)

    While 1

        $x1 = FileReadLine($readWPfile,$count)

        if $x1 = "" Then

            $count = 1
            ExitLoop
        EndIf

        If @error = -1 Then    ExitLoop

        $wpField[$count-1] = $x1

        $count = $count +1

        $x2 = FileReadLine($readWPfile,$count)
        $wpField[$count-1] = $x2

        $count = $count +1

        $x3 = FileReadLine($readWPfile,$count)
        $wpField[$count-1] = $x3

        $count = $count +1




    Wend
    _toolTip("Waypoints loaded ... "&$countMax/3&" found" )
    FileClose($readWPfile)

EndFunc

Func walkPoints()
    while $i < ($countMax-1)
        WinActivate("AION Client")
        WinWaitActive("AION Client")
        _toolTip("Move to waypoint "&($i/3)+1)
        $xCoord=$wpField[$i]
        $yCoord=$wpField[$i+1]
        $zCoord=$wpField[$i+2]
        $i=$i+3

        $Distance = calcDist($xCoord,$yCoord)
        while $Distance > 3
            alignRotaion($xCoord, $yCoord, true)
        WEnd

        If $Run = False Then
            Send("{w up}")
            ExitLoop

        EndIf
    WEnd
EndFunc

Func _toolTip($msg)
    GUICtrlSetData($status,$msg)
EndFunc

Func calcDist($xa,$ya)
    $distCalc = sqrt( ($xa-PlayerXPos())^2 + ($ya-PlayerYPos())^2 )
    if($distCalc > 15) Then
    EndIf
    return $distCalc
EndFunc

Func alignRotaion($x, $y, $move = false)
    $playerXcoord = PlayerXPos()
    $playerYcoord = PlayerYPos()

    $diffY = Round($y - $playerYcoord,2)
    $diffX = Round($x - $playerXcoord,2)
    $angle = getAngle($diffX, $diffY)
    $nowAng = getThreeSixty(GetPlayerPos(), true)
    _switchRotate($angle, $nowAng)
    While ($angle + 5) < $nowAng OR ($angle - 5) > $nowAng
        if $move Then
            Send("{w down}")
        EndIf
        Send("{"&$rot_down&"}")
        $nowAng = getThreeSixty(GetPlayerPos(), true)
    WEnd
    if $move Then
        if(($angle + 5) < $nowAng AND ($angle - 5) > $nowAng) Then
            Send("{w up}")
        EndIf
    EndIf
    Send("{"&$rot_up&"}")
EndFunc

Func getAngle($diffX, $diffY)
    $angle = ATan($diffY/$diffX)
    $angle = ($angle * 180.0 )/ $pi
    if $diffX > 0 and $diffY > 0 Then
        return getThreeSixty((180 -$angle),true)
    ElseIf $diffX > 0 and $diffY < 0 Then
        return getThreeSixty((-180 -$angle),true)
    ElseIf $diffX < 0 and $diffY < 0 Then
        return getThreeSixty((0 -$angle),true)
    ElseIf $diffX < 0 and $diffY > 0 Then
        return getThreeSixty((0 -$angle),true)
    EndIf
EndFunc

Func getThreeSixty($angle, $flag = false)
    If($flag) Then
        If($angle < 0) Then
            $angle = (360 - ($angle * -1))
        EndIf
    Else
        If($angle > 360)Then
            $angle = $angle - 360
        ElseIf($angle < 0)Then
            $angle = $angle + 360
        EndIf
    EndIf
    Return $angle
EndFunc

Func _switchRotate($target, $now)
    if($target < $now) Then
        If(($now - $target) > 180) Then
            $rot_down = "a down"
            $rot_up = "a up"
        Else
            $rot_down = "d down"
            $rot_up = "d up"
        EndIf
    Else
        If(($target - $now) > 180) Then
            $rot_down = "d down"
            $rot_up = "d up"
        Else
            $rot_down = "a down"
            $rot_up = "a up"
        EndIf
    EndIf
EndFunc