[Release] RBonusMapBot

Page 7 of 22

09/25/2013 23:34 passit12#91

Quote:

Originally Posted by elvis_arg

Hi xRiDDi. Thank you very much for the bots. My problem is this:

Compiling Error - Line 959 - Type Mismatch

as I can fix it? thank you very much

Have you tried to change anything within the script? Please redownload the script and see if this fixes your issue.

Quote:

Originally Posted by Sensey_II

[Only registered and activated users can see links. Click Here To Register...]

write this and doesn't work for me :(

Make sure you are starting the bot using the Scar Hotkeys.
Also, this does not really show me what the problem is, can you describe your issue.

Quote:

Originally Posted by Hude1

SeaChart AutoDefined: x1 = 397, y1 = 101, x2 = 1196, y2 = 687.
If your SeaChart is NOT at this position, please use manual define.

MiniMap AutoDefined: x1 = 1237, y1 = 95, x2 = 1326, y2 = 184
If your MiniMap is NOT at this position, please use manual define.

RepButton AutoDefined: repx = 980, repy = 713
If your RepButton is NOT at this position, please use manual define.

Successfully executed

It doesnt seem like your HP bar has been found, check the 1st post and look in the Picture section, does your HP bar look like that and clearly visible, as well as being full hp?
If it does look like the picture, please post a picture of your SeaChart saved as a Bitmap so I can have a look.

Also, describing your problem may also help me find the answer to your problem - what does the bot do?

Quote:

Originally Posted by kanatas12

xRIDI how i can make the bonus map to dont change balls because i want play bonus map with hollows(4 damage) for make XP i dont want big damage

Change line 38:

Code:

From:
AutoChangeAmmo:=true;
To:
AutoChangeAmmo:=false;

Then select the 4dmg balls, and start the script.

09/26/2013 00:05 roostaam#92

Thanks, this is the best Bonus Map script.

09/26/2013 01:16 elvis_arg#93

entering the water and then Sagittarius and run the scrip...

HP has been found at 140,203

Successfully executed

the boat does nothing, does not shoot or move and the mouse cursor indicates a corner over and over again but the ship does not move.

here is one of my display screen...

[Only registered and activated users can see links. Click Here To Register...]

And try with F11(full screen) and the same error persists, the boat does not move or attack

Thanks for all the help

09/26/2013 01:49 Sehzade35#94

Doesn't work

How to set up? Would you make video presentation

09/26/2013 02:14 lagartospock#95

Hello I am new to this on the configuration of the bm bot and do not know how I have to configure it to work for me.
connocen some tutorial or link where exact settings come step by step

09/26/2013 05:00 JuNiNhO0#96

@Riddi maybe i find new error. running on cancer map, this bot clicking on repair in 00AA , after npcs shoot him, he trying click on 60AA and 00AA, dont repair and dont shoot npc. i think the problem is the range of cancer map.

Sorry for my english, maybe is better google trans :)

09/26/2013 09:41 Boss76#97

Hello,
How to put the space button out in button "FireKey" ?:confused:

09/26/2013 10:58 PeterLustig1980#98

Sehr geile Sache,ein dickes Lob!!

Very good Job.

ThnX

09/26/2013 12:02 sm838#99

Although I think the bot recognizes everything as I get these messages from the script:

Made by xRiDDi
Keep up to date at: [Only registered and activated users can see links. Click Here To Register...]

HP has been found at 141,377

SeaChart AutoDefined: x1 = 399, y1 = 148, x2 = 1198, y2 = 734.
If your SeaChart is NOT at this position, please use manual define.

RepButton AutoDefined: repx = 751, repy = 785
If your RepButton is NOT at this position, please use manual define.

Successfully executed

It does not shoot at the npcs but istead it keeps clicking at the same corner at the mini map and then it starts moving to this corner.

Any ideas on how to fix this xRiDDi?

09/26/2013 18:48 mogli21#100

diese scar 3.22 ist doch schei...!!!
wenn ich es mir von besagter seite lade gibt es schwierigkeiten mit meinem av-programm...
ich stellte dieses aus und siehe da --> sofort einen virus drauf!!! ich k�nnte kotzen!
hat jemand eine alternative wo ich scar 3.22 ohne virus herbekomme?

09/26/2013 19:51 sv1byn#101

have problem to my

HP not found, please make sure you are full rep.
Ending Script
Successfully executed
help my pls

09/26/2013 20:56 *Ronja*#102

@xRiddi you have a pm :) i hope you can help me ;)

09/26/2013 21:00 jarit#103

Quote:

Originally Posted by sv1byn

have problem to my

HP not found, please make sure you are full rep.
Ending Script
Successfully executed
help my pls

Read the massage:

Quote:

Originally Posted by sv1byn

make sure you are full rep.

If this doesnt help, then add me by skype and I will see if I can help you.

09/26/2013 21:35 seafight...#104

Quote:

Originally Posted by jarit

Read the massage:

If this doesnt help, then add me by skype and I will help you.

I have the same problem jarit ,please help me,I have added you in skype,thank you :)

09/26/2013 21:48 passit12#105

Quote:

Originally Posted by elvis_arg

entering the water and then Sagittarius and run the scrip...

HP has been found at 140,203

Successfully executed

the boat does nothing, does not shoot or move and the mouse cursor indicates a corner over and over again but the ship does not move.

here is one of my display screen...

[Only registered and activated users can see links. Click Here To Register...]

And try with F11(full screen) and the same error persists, the boat does not move or attack

Thanks for all the help

Please clear your cache - your mini map should not look like that when using the Custom Client.

Quote:

Originally Posted by Sehzade35

Doesn't work

How to set up? Would you make video presentation

Please don't write "Doesnt work" if you dont know how to set it up correctly.
If someone seen you write "Doesnt work" but infact it does work, it might prevent them from trying to use the bot/set it up for themselves.

Right now there is no video for setup as alot of changes will be coming and the setup will change. For now, please just read the first post, the comments in the script, and past posts. These should be enough to help you set it up - it is not hard to do.

Quote:

Originally Posted by lagartospock

Hello I am new to this on the configuration of the bm bot and do not know how I have to configure it to work for me.
connocen some tutorial or link where exact settings come step by step

Right now there is no video for setup as alot of changes will be coming and the setup will change. For now, please just read the first post, the comments in the script, and past posts. These should be enough to help you set it up - it is not hard to do.

Quote:

Originally Posted by JuNiNhO0

@Riddi maybe i find new error. running on cancer map, this bot clicking on repair in 00AA , after npcs shoot him, he trying click on 60AA and 00AA, dont repair and dont shoot npc. i think the problem is the range of cancer map.

Sorry for my english, maybe is better google trans :)

I will look into this error, i assume it is because your ship is not moving fast enough for the bot to recognise it is moving, so it constantly thinks it is sitting still being hit - so moving to another corner to rep.

Page 7 of 22

« First

Last »