Para's VanillaTool [Rework]

Page 661 of 734

661

07/31/2019 11:59 MiraFLo#9901

UnLimiter don't work

07/31/2019 12:29 natirel92#9902

Quote:

Originally Posted by Vince3D

Hello,
I just reinstall my pc and am on windows 10 now.
vanilla no longer starts, but that he accepted on windows defender.
Can you help me. Thank you in advance

if you reinstalled the pc, your id has changed specially if you changed windows version

mail to para you old id and new id, and he will switch the 'license'' to the new installation (or at least your email account used with paypal if you don't have the old ID + the new id)

07/31/2019 12:40 Paraly#9903

Quote:

Originally Posted by MiraFLo

UnLimiter don't work

There was a small Aion patch, the UnLimiter and Account Manager are updated now :)

08/03/2019 07:01 crazymonkey84#9904

how can i set a rule in combat wizard for my chart to use a skill anytime the skill becomes available?

08/03/2019 11:44 Paraly#9905

Quote:

Originally Posted by crazymonkey84

how can i set a rule in combat wizard for my chart to use a skill anytime the skill becomes available?

It always checks every single skill ID of _ACSkill, if a skill is available it uses it, and between every skill it checks at _ACSkill it will check if a _ACHeal or _ACBuff should be used, so no matter where you put the skill it will be used, _ACHeal and _ACBuff have higher priority though, this doesn't mean you should put any skill into _ACHeal / _ACBuff this will be equally fast as having everything in _ACSkill

08/03/2019 20:46 shootet#9906

hello paralyze,

is it me or little script like mob grinder, loot follower dont loot anymore?

something wrong in this start_WaitForLoot?

Spoiler

08/03/2019 21:36 Paraly#9907

Quote:

Originally Posted by shootet

hello paralyze,

is it me or little script like mob grinder, loot follower dont loot anymore?

something wrong in this start_WaitForLoot?

Spoiler

start_WaitForLoot;

_SetVar1=0;

#DO=22000; 22 seconds loot timeout

MemPtrWrite=%PlayerBase,%OffsetActionID,0x15000000 01000000000000000000000000000000000000000100000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000100000000000000000000 00000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000002,BYTE[225];
Delay=250;
UseID=50002;

_IFMemPtrRead=%TargetBase,%OffsetData/0x1588,DWORD,>0; <-- Loot table received
_IFMemPtrRead=%TargetBase,%OffsetData/0x1574,DWORD,=0; <-- Not lootable anymore
_SetVar1=1;
#ENDIF

_IFMemRead=%AddrTargetID,WORD,=%Var2; <-- Lost target
#ELSE
_SetVar1=1;
#ENDIF

Delay=500;

_IFMemPtrRead=%AddrFrameID[275],0x28,BYTE,=175;
SendKey=0x43;
Delay=5;
SendKey=0x43;
Delay=5;
SendKey=0x43;
Delay=5;
SendKey=0x43;
Delay=15;
Command=;
Delay=15;
Command=;
Delay=15;
Command=;
Delay=15;
_SetVar1=1;
_IFMemPtrRead=%AddrFrameID[527],0x28,BYTE,=175;
SendKey=0x0D;
Delay=50;
SendKey=0x0D;
Delay=50;
Command=;
SendKey=0x1B;
MemPtrWrite=%AddrFrameID[19],0x28,142,BYTE;
#ENDIF

_IFMemPtrRead=%AddrFrameID[527],0x28,BYTE,=175;
SendKey=0x0D;
Delay=50;
SendKey=0x0D;
Delay=50;
Command=;
SendKey=0x1B;
MemPtrWrite=%AddrFrameID[19],0x28,142,BYTE;
#ENDIF

_IFMemPtrRead=%PlayerBase,%OffsetHP,DWORD,=0;
_SetVar1=1;
#ENDIF

#UNTIL=%Var1,=1;

SendKey=0x1B;
Delay=15;
SendKey=0x1B;
Delay=15;
SendKey=0x1B;
Delay=15;
SendKey=0x1B;
Delay=15;
MemPtrWrite=%AddrFrameID[19],0x28,142,BYTE;

end_WaitForLoot;

The Loot Follower already was updated, the Mob Grinder wasn't though, I just updated it.

08/04/2019 05:43 crazymonkey84#9908

Quote:

Originally Posted by Paraly

It always checks every single skill ID of _ACSkill, if a skill is available it uses it, and between every skill it checks at _ACSkill it will check if a _ACHeal or _ACBuff should be used, so no matter where you put the skill it will be used, _ACHeal and _ACBuff have higher priority though, this doesn't mean you should put any skill into _ACHeal / _ACBuff this will be equally fast as having everything in _ACSkill

so if i want my sin to use shadow fall any time the enemy is stunned, and its available should i locate it under _ACBuff or _ACHeal?

08/04/2019 08:04 agua2o#9909

Don't take this to the heart, but I just tested AionBot and the combat is much more fluid than Vanilla's for botting. What gives? I'm paying for Vanilla right now (just in case some smartass says "use it then"). I really like all the other perks that Vanilla has.

Could you work a little bit more in the skills usage and target select? Skill usage in Vanilla feels so slow. And the bot doesn't try to find a target near his position after killing a mob, he moves to the next position first and only then tries to find a new target. This slows botting by quite a bit. Just some sugestions.

08/04/2019 09:35 crazymonkey84#9910

Quote:

Originally Posted by agua2o

Don't take this to the heart, but I just tested AionBot and the combat is much more fluid than Vanilla's for botting. What gives? I'm paying for Vanilla right now (just in case some smartass says "use it then"). I really like all the other perks that Vanilla has.

Could you work a little bit more in the skills usage and target select? Skill usage in Vanilla feels so slow. And the bot doesn't try to find a target near his position after killing a mob, he moves to the next position first and only then tries to find a new target. This slows botting by quite a bit. Just some sugestions.

Where can i get that tool?

08/04/2019 10:17 MiraFLo#9911

I've got a constant client crash today. On any version of the program.
who knows what the reason might be?

08/04/2019 10:43 Paraly#9912

Quote:

Originally Posted by MiraFLo

I've got a constant client crash today. On any version of the program.
who knows what the reason might be?

1. Restart your PC

2. Delete these folders / files
bin64
data/dump
system.cfg
SystemOptionGraphics.cfg

3. Repair your client afterwards with the official launcher

Quote:

Originally Posted by crazymonkey84

so if i want my sin to use shadow fall any time the enemy is stunned, and its available should i locate it under _ACBuff or _ACHeal?

No, chain skills and conditional skills get checked automatically between every skill no need to declare them anywhere, as soon as it finds a skill ID available there it will use it

Quote:

Originally Posted by agua2o

Don't take this to the heart, but I just tested AionBot and the combat is much more fluid than Vanilla's for botting. What gives? I'm paying for Vanilla right now (just in case some smartass says "use it then"). I really like all the other perks that Vanilla has.

Could you work a little bit more in the skills usage and target select? Skill usage in Vanilla feels so slow. And the bot doesn't try to find a target near his position after killing a mob, he moves to the next position first and only then tries to find a new target. This slows botting by quite a bit. Just some sugestions.

I already reworked the combat and it's as fast as possible with 1 thread, vanillatool doesn't support multi-threading, adjusting your rotation in the combat routine can improve it by a lot, AionBot is as far as I've seen just another rip off from the AionScript source, Blastradius did a good job back then a shame what happend to him.

There might be some improvements coming in terms of detecting nearby mobs and mobs that are aggressive against you

08/04/2019 11:24 MiraFLo#9913

Quote:

Originally Posted by Paraly

1. Restart your PC

2. Delete these folders / files
bin64
data/dump
system.cfg
SystemOptionGraphics.cfg

3. Repair your client afterwards with the official launcher

the client's crash on the Luna npc quest dialogues. Please check it out.