[Release] BonusMapBot(No Custom Client)

[Only registered and activated users can see links. Click Here To Register...]
that's the part that has to be visible
However, this shouldn't be the problem, autodefinitions are needed for repbutton and minimap, because of poorly written code

Quote:

Originally Posted by Oxidium Why you dont set it to = false and define it by your own? Gesendet von meinem SM-G920F mit Tapatalk

I have all tested, set the seamap values, the minimap values, the repair button values and put the lvl 4 carpenter while I own the lvl 5 I also tried with google Chrome, firefox and Internet Explorer 3 times for each Browser But still the same problem, I expect a new script update in July or later.
Thank you for your work and your help and good luck for the update

------YOU ARE IN DEBUG MODE------

DB (31.05.2017 20:54:41): Settings:
DB (31.05.2017 20:54:41): AutoDefineSeamap: True
DB (31.05.2017 20:54:41): AutoDefineMiniMap: True
DB (31.05.2017 20:54:41): AutoDefineRepButton: True
DB (31.05.2017 20:54:41): AutoDefineURLbarAndLogOutButton: True
DB (31.05.2017 20:54:41): AutoChangeAmmo: False
DB (31.05.2017 20:54:41): Level5Carpenter: False
DB (31.05.2017 20:54:41): RefreshAfterMap: False
DB (31.05.2017 20:54:41): AttackMode: 2
DB (31.05.2017 20:54:41): FireKey: f
DB (31.05.2017 20:54:41): DriveKey: v
DB (31.05.2017 20:54:41): ToggleOpponentsKey: n
DB (31.05.2017 20:54:41): RepKey: q
DB (31.05.2017 20:54:41): ToShipKey:
DB (31.05.2017 20:54:41): AbortAttack: t
DB (31.05.2017 20:54:41): HollowsSlotNumber: 1
DB (31.05.2017 20:54:41): DoAllMaps: False
DB (31.05.2017 20:54:41): Map1SlotNumber: 7
DB (31.05.2017 20:54:41): Map2SlotNumber: 8
DB (31.05.2017 20:54:41): Map3SlotNumber: 9
DB (31.05.2017 20:54:41): Map4SlotNumber: 0
DB (31.05.2017 20:54:41): UpKey: 87
DB (31.05.2017 20:54:41): DownKey: 83
DB (31.05.2017 20:54:41): LeftKey: 65
DB (31.05.2017 20:54:41): RightKey: 68
DB (31.05.2017 20:54:41): HpPerc: 1
DB (31.05.2017 20:54:41): HpTol: 15
DB (31.05.2017 20:54:41): KeyWait: 10
CheckMoveWait Set To Greater Value
DB (31.05.2017 20:54:41): LoadVariables:
DB (31.05.2017 20:54:41): ClientDimensions: 1366x768
DB (31.05.2017 20:54:41): HpFull: 29440
DB (31.05.2017 20:54:41): MMship: 65280
DB (31.05.2017 20:54:41): MMNpc: 39423
DB (31.05.2017 20:54:41): CheckMoveWait: 3500
DB (31.05.2017 20:54:41): RandomWait: 100
DB (31.05.2017 20:54:41): StartWait: 5000
DB (31.05.2017 20:54:41): CorrectAmmo: True
DB (31.05.2017 20:54:41): CoolDownWait: 1150
DB (31.05.2017 20:54:41): MaxDist: 6
DB (31.05.2017 20:54:41): MinDist: 4
DB (31.05.2017 20:54:41): MinDist2: 4
DB (31.05.2017 20:54:41): DriveType: Down

DB (31.05.2017 20:54:46): PROCEDURE: Positions - START
Could not define seamap
Successfully executed

help me

Quote:

Originally Posted by trujillo123e ------YOU ARE IN DEBUG MODE------ DB (31.05.2017 20:54:41): Settings: DB (31.05.2017 20:54:41): AutoDefineSeamap: True DB (31.05.2017 20:54:41): AutoDefineMiniMap: True DB (31.05.2017 20:54:41): AutoDefineRepButton: True DB (31.05.2017 20:54:41): AutoDefineURLbarAndLogOutButton: True DB (31.05.2017 20:54:41): AutoChangeAmmo: False DB (31.05.2017 20:54:41): Level5Carpenter: False DB (31.05.2017 20:54:41): RefreshAfterMap: False DB (31.05.2017 20:54:41): AttackMode: 2 DB (31.05.2017 20:54:41): FireKey: f DB (31.05.2017 20:54:41): DriveKey: v DB (31.05.2017 20:54:41): ToggleOpponentsKey: n DB (31.05.2017 20:54:41): RepKey: q DB (31.05.2017 20:54:41): ToShipKey: DB (31.05.2017 20:54:41): AbortAttack: t DB (31.05.2017 20:54:41): HollowsSlotNumber: 1 DB (31.05.2017 20:54:41): DoAllMaps: False DB (31.05.2017 20:54:41): Map1SlotNumber: 7 DB (31.05.2017 20:54:41): Map2SlotNumber: 8 DB (31.05.2017 20:54:41): Map3SlotNumber: 9 DB (31.05.2017 20:54:41): Map4SlotNumber: 0 DB (31.05.2017 20:54:41): UpKey: 87 DB (31.05.2017 20:54:41): DownKey: 83 DB (31.05.2017 20:54:41): LeftKey: 65 DB (31.05.2017 20:54:41): RightKey: 68 DB (31.05.2017 20:54:41): HpPerc: 1 DB (31.05.2017 20:54:41): HpTol: 15 DB (31.05.2017 20:54:41): KeyWait: 10 CheckMoveWait Set To Greater Value DB (31.05.2017 20:54:41): LoadVariables: DB (31.05.2017 20:54:41): ClientDimensions: 1366x768 DB (31.05.2017 20:54:41): HpFull: 29440 DB (31.05.2017 20:54:41): MMship: 65280 DB (31.05.2017 20:54:41): MMNpc: 39423 DB (31.05.2017 20:54:41): CheckMoveWait: 3500 DB (31.05.2017 20:54:41): RandomWait: 100 DB (31.05.2017 20:54:41): StartWait: 5000 DB (31.05.2017 20:54:41): CorrectAmmo: True DB (31.05.2017 20:54:41): CoolDownWait: 1150 DB (31.05.2017 20:54:41): MaxDist: 6 DB (31.05.2017 20:54:41): MinDist: 4 DB (31.05.2017 20:54:41): MinDist2: 4 DB (31.05.2017 20:54:41): DriveType: Down DB (31.05.2017 20:54:46): PROCEDURE: Positions - START Could not define seamap Successfully executed help me

You have to be in 800x600 and your gamescreen has to be clearly visible.

Quote:

Originally Posted by trolleras9 why turned off every auto definition? you could have misdefined the rep button and the minimap, also check the settings for carpenter lvl4 if you dont own the lvl 5

Whenever I use carp lvl 5 it always messes up, it starts repairing while still in range of the npcs so it stops repairing, then it goes to the corner while it's not repairing. After thinking it's done repairing it goes back to the npcs and after a few seconds starts repairing in range of the npcs and does everything over again. With other words, it never repairs to full, only 10k, then goes back to the npcs. Is it only me or?

[QUOTE=GameoverEG4;36048673]You have to be in 800x600 and your gamescreen has to be clearly visible.


it stays the same, Already place 800 x 600 and nothing

------YOU ARE IN DEBUG MODE------

DB (01.06.2017 20:45:26): Settings:
DB (01.06.2017 20:45:26): AutoDefineSeamap: True
DB (01.06.2017 20:45:26): AutoDefineMiniMap: True
DB (01.06.2017 20:45:26): AutoDefineRepButton: True
DB (01.06.2017 20:45:26): AutoDefineURLbarAndLogOutButton: True
DB (01.06.2017 20:45:26): AutoChangeAmmo: False
DB (01.06.2017 20:45:26): Level5Carpenter: False
DB (01.06.2017 20:45:26): RefreshAfterMap: False
DB (01.06.2017 20:45:26): AttackMode: 2
DB (01.06.2017 20:45:26): FireKey: f
DB (01.06.2017 20:45:26): DriveKey: v
DB (01.06.2017 20:45:26): ToggleOpponentsKey: n
DB (01.06.2017 20:45:26): RepKey: q
DB (01.06.2017 20:45:26): ToShipKey:
DB (01.06.2017 20:45:26): AbortAttack: t
DB (01.06.2017 20:45:26): HollowsSlotNumber: 1
DB (01.06.2017 20:45:26): DoAllMaps: False
DB (01.06.2017 20:45:26): Map1SlotNumber: 7
DB (01.06.2017 20:45:26): Map2SlotNumber: 8
DB (01.06.2017 20:45:26): Map3SlotNumber: 9
DB (01.06.2017 20:45:26): Map4SlotNumber: 0
DB (01.06.2017 20:45:26): UpKey: 87
DB (01.06.2017 20:45:26): DownKey: 83
DB (01.06.2017 20:45:26): LeftKey: 65
DB (01.06.2017 20:45:26): RightKey: 68
DB (01.06.2017 20:45:26): HpPerc: 1
DB (01.06.2017 20:45:26): HpTol: 15
DB (01.06.2017 20:45:26): KeyWait: 10
CheckMoveWait Set To Greater Value
DB (01.06.2017 20:45:26): LoadVariables:
DB (01.06.2017 20:45:26): ClientDimensions: 1920x1080
DB (01.06.2017 20:45:26): HpFull: 29440
DB (01.06.2017 20:45:26): MMship: 65280
DB (01.06.2017 20:45:26): MMNpc: 39423
DB (01.06.2017 20:45:26): CheckMoveWait: 3500
DB (01.06.2017 20:45:26): RandomWait: 100
DB (01.06.2017 20:45:26): StartWait: 5000
DB (01.06.2017 20:45:26): CorrectAmmo: True
DB (01.06.2017 20:45:26): CoolDownWait: 1150
DB (01.06.2017 20:45:26): MaxDist: 6
DB (01.06.2017 20:45:26): MinDist: 4
DB (01.06.2017 20:45:26): MinDist2: 4
DB (01.06.2017 20:45:26): DriveType: Down

DB (01.06.2017 20:45:31): PROCEDURE: Positions - START
Seamap Found at 560, 247, 1358, 862.
Minimap Found at 1238, 276, 1327, 365.
RepButton Found at 1129, 895, 1167, 933.
Hp not found. Make sure that you are FULLY repaired and that your Hp bar is FULLY visible
Successfully executed
i have full hp and he is visible fromt hour 12 don't work i want to make bonusmaps please help

guys ,
how start with this ? i had just one file and i dont know what to do with it ;/

re filaraki kane kanena scaraki gia lion map

it's cant start. its cant find hp bar. how can i fix it ? it's take me this message :

""SeaMap has been Manually Defined at: smx1 = 583, smy1 = 258, smx2 = 1376, smy2 = 870
Minimap has been Manually Defined at: mmx1 = 1435, mmy1 = 261, mmx2 = 1522, mmy2 = 348
RepButton has been Manually Defined at: repx1 = 511, repy1 = 770, repx2 = 546, repy2 = 805
Hp not found. Make sure that you are FULLY repaired and that your Hp bar is FULLY visible
Successfully executed""

and stop scar divi.

my hp bar and voodoo bar is full :(:(

the time i use scar bots i had to use firefox (not chrome) and manually define everything and it worked. ofc everything should be visible, but with chrome i think the bot cannot see it

all time i have problem with HP not found. :/

I would like to optimize my bot this is why I would like to know the role of each of these functions
CheckMoveWait := ;
writeln('CheckMoveWait Set To Greater Value');
CheckMoveWait := ;
RandomWait := ;
CoolDownWait := ;

Can someone explain how to determine the getclientdimension?
This is what puts me: [Only registered and activated users can see links. Click Here To Register...]
I use ScarDIVI 3.41.00

You have to use Scar 3.22 :)

The scripts for seafight are old is better to use scar divi 3.22

[Only registered and activated users can see links. Click Here To Register...]