I'm guessing that there is some time where the cursor is not moving. The bot does not do well at recording non-movement. I had the exact same problem for 3 days until I realised that it wasn't recording my non-movement times between waves of enemies. As soon as I realised this I started making sure that my cursor was always moving(even when attacking I'm doing small circles) and since then I've had a 100% success rate. It can also help to use cheat engine to slow the game down too. I run at 0.80%, it doesn't slow the timer down but it does affect enemies a bit. It gives you a little more time to hover over each one to kill it.Quote:
thanks for the tip, installed autoit and it now runs.
I am running into a slight problem that is I record a mission, run through it successfully and then switch back to play. on the bot playthrough it has a 100% fail rate on the mission. any ideas?
[Beta] UntzBot (Space Missions Bot, recorder+player)
02/25/2012 02:19
Forwardsbackflip#376
02/25/2012 18:36
Tomm0#377
I'm running version 4.0x lite, and I've been having a slight issue. About every third run or so, the bot stops auto-firing. This usually winds up in a failed run, but then the next 2-3 run perfectly without any problems. I am running a Windows Classic theme, 800 x 600 windowed mode in game. I deleted the program and redownloaded, but that didn't seem to fix the issue. Anyone else having a similar problem? Thanks.
02/25/2012 19:04
Mr.Smith™#378
Bei mir kommt nen ERROR !
02/25/2012 20:27
djakah#379
Does somebody use the 1-4 buttons? Cause it seems that on my records the buttons are not recorded.
I have tried with the french version, the english version, older versions of the bot, I've tried with an other computer and... nothing.
Could someone have a solution?
I have tried with the french version, the english version, older versions of the bot, I've tried with an other computer and... nothing.
Could someone have a solution?
02/25/2012 22:03
Dakushisai#380
ich bin ja ganz heiß auf diesen Bot :P
und würde ihn ja soo gerne nutzen ,aber ich verstehe nur Bahnhof.
Könnte mir jemand erklären was genau zu machen ist damit ich den bei meinen
Raum Missis nutzen kann? Würde mich sehr über eine Deutsche Anleitung freuen :)
ps: ach ich sehe gerade das ur die ersten 35 lvl free sind? o.O
omg ,wieso wird sowas denn hier reingestellt >.< naja schade ,hatte mich bereits gefreut ^^
und würde ihn ja soo gerne nutzen ,aber ich verstehe nur Bahnhof.
Könnte mir jemand erklären was genau zu machen ist damit ich den bei meinen
Raum Missis nutzen kann? Würde mich sehr über eine Deutsche Anleitung freuen :)
ps: ach ich sehe gerade das ur die ersten 35 lvl free sind? o.O
omg ,wieso wird sowas denn hier reingestellt >.< naja schade ,hatte mich bereits gefreut ^^
02/25/2012 23:50
nafest#381
Quote:
und würde ihn ja soo gerne nutzen ,aber ich verstehe nur Bahnhof.
Könnte mir jemand erklären was genau zu machen ist damit ich den bei meinen
Raum Missis nutzen kann? Würde mich sehr über eine Deutsche Anleitung freuen :)
ps: ach ich sehe gerade das ur die ersten 35 lvl free sind? o.O
omg ,wieso wird sowas denn hier reingestellt >.< naja schade ,hatte mich bereits gefreut ^^
Vielleicht hilft Dir das weiter ;)
[Only registered and activated users can see links. Click Here To Register...]
02/26/2012 01:18
Dakushisai#382
mh ,der will irwie nicht .
Ist das richtig? ich habe den ,also das was du geschickt hattest ,
in meinen vorhanden Ordner ersetzt und nun gestartet wie das andere auch aber es passiert nix ^^
Ist das richtig? ich habe den ,also das was du geschickt hattest ,
in meinen vorhanden Ordner ersetzt und nun gestartet wie das andere auch aber es passiert nix ^^
02/26/2012 04:05
nafest#383
Ka was de falsch machst, aber ansonsten nehme mal meine cracked Version für die aktuellste Version :pimp: Weiß jetzt net, ob Dagster seinen schon updatet hat :confused:
02/26/2012 12:37
Alkahazam#384
I don't gt it guys. Bot works, but is not able to win any scenario? Tried a lot of different settings but he always shoots around like hell and without sense. What do i have to change?:confused:
02/26/2012 14:58
Forwardsbackflip#385
See my previous post below:Quote:
I'm guessing that there is some time where the cursor is not moving. The bot does not do well at recording non-movement. I had the exact same problem for 3 days until I realised that it wasn't recording my non-movement times between waves of enemies. As soon as I realised this I started making sure that my cursor was always moving(even when attacking I'm doing small circles) and since then I've had a 100% success rate. It can also help to use cheat engine to slow the game down too. I run at 0.80%, it doesn't slow the timer down but it does affect enemies a bit. It gives you a little more time to hover over each one to kill it.Quote:
I am running into a slight problem that is I record a mission, run through it successfully and then switch back to play. on the bot playthrough it has a 100% fail rate on the mission. any ideas?
02/26/2012 17:39
thephilz#386
so yeah i know ive been lazy recently, so heres a brute force crewbot
basically its another beta for the 'to be included' crewbot
if all goes well (it better!) then ill be rolling out 4.1 which will only contain a handful of anti-crash measures (removal of botstatus.txt), some better deathcheck detection, a fix of the 'accept button', and of course the crewbot
ive been trying to implement a 'series of missions' kind of thing, but there is a major problem - delay timer
some recordings are not 'perfectly in sync' with other recordings, so if all missions are set to the same timer it may be somewhat tricky to get every mission to work if you run many of them
if/when i do implement it, all missions will be forced to run at the same delay timer until i can figure out a proper solution (probably a header file containing delay information or something)
event sync shouldnt suffer too much, but timer sync might take a nasty hit, its kind of unknown right now
also, of course, higher-end computers shouldnt even have a problem with this delay issue, but crappier ones (like my own) will feel the pain
and with all that said, heres CrewBot v2.0, tell me if it has any major issues
please remember that its not supposed to be run every 10 seconds, but after every space mission, so realistically it should only run every 3-7 minutes and thus be 'less suspicious'
and yes the list sometime gets 'derpy', so you might need to click and use the arrow keys/tab to move the menus around (no idea why it does that)
basically its another beta for the 'to be included' crewbot
if all goes well (it better!) then ill be rolling out 4.1 which will only contain a handful of anti-crash measures (removal of botstatus.txt), some better deathcheck detection, a fix of the 'accept button', and of course the crewbot
ive been trying to implement a 'series of missions' kind of thing, but there is a major problem - delay timer
some recordings are not 'perfectly in sync' with other recordings, so if all missions are set to the same timer it may be somewhat tricky to get every mission to work if you run many of them
if/when i do implement it, all missions will be forced to run at the same delay timer until i can figure out a proper solution (probably a header file containing delay information or something)
event sync shouldnt suffer too much, but timer sync might take a nasty hit, its kind of unknown right now
also, of course, higher-end computers shouldnt even have a problem with this delay issue, but crappier ones (like my own) will feel the pain
and with all that said, heres CrewBot v2.0, tell me if it has any major issues
please remember that its not supposed to be run every 10 seconds, but after every space mission, so realistically it should only run every 3-7 minutes and thus be 'less suspicious'
and yes the list sometime gets 'derpy', so you might need to click and use the arrow keys/tab to move the menus around (no idea why it does that)
02/26/2012 17:54
Alkahazam#387
Thanks, but still doesn't work for the whole time after around 50% of the mission he aims the wrong targets again and again. Not sure why..
02/26/2012 20:05
jgoines#388
I cannot seem to get recording mode to work. I'm not positive how much the debugger would help for that either.
Environment:
Windows 7 x64
Game Resolution 800x600
English
What happens is this: I start the bot and start a play mode to make sure that the window is in the right position (which for me is upper left corner of screen) then I stop the bot and change mods. Press start and bot crashes. I think I see a flicker on the status screen that says "WorldMap found" but that is it. I restart the bot this time since the game window hasn't moved I just try record mode right away... same result.
BTW
This is a great bot, its amazing what you can do with AutoIt I was happy to donate my $10. I think everyone should.
PS
I'd settle for a working Imperial44Clouds or Imperial48Ascendancy *smile*
EDIT:
This crash also happens if you try to play "Imperial48Ascendancy". (I tried a file somoene sent me, but I cannot confrim that it works as the crash happens).
Environment:
Windows 7 x64
Game Resolution 800x600
English
What happens is this: I start the bot and start a play mode to make sure that the window is in the right position (which for me is upper left corner of screen) then I stop the bot and change mods. Press start and bot crashes. I think I see a flicker on the status screen that says "WorldMap found" but that is it. I restart the bot this time since the game window hasn't moved I just try record mode right away... same result.
BTW
This is a great bot, its amazing what you can do with AutoIt I was happy to donate my $10. I think everyone should.
PS
I'd settle for a working Imperial44Clouds or Imperial48Ascendancy *smile*
EDIT:
This crash also happens if you try to play "Imperial48Ascendancy". (I tried a file somoene sent me, but I cannot confrim that it works as the crash happens).
02/26/2012 23:50
tornizzle#389
Have you figured out what is up with this yet?Quote:
i believe the latest patch might have broken it or something - it definitely worked a few nights ago
ill wait until server goes down then comes back up, then see if they patch fixed it or whatever, this is pretty annoying
Still takes double click to get to the unknown region
02/27/2012 06:30
bama004#390
First - thanks for the bot.
Second - questions. I'm currently at lvl 44 doing lvl 40 imperial Sullis missions on timer sync. I tried event sync but my actions seemed to be out of sync by about a second. I may try again once I start botting 44clouds.
1) Any idea why my bot might become intermittently out of sync? Again, it looks like it's out of sync by a second or two. Sometimes this solves itself - with no manual intervention - after a failed mission. Sometimes it does not solve itself even with a game restart. It seems like this sort of thing would happen due to variable load times, but I have a 2000ms delay on using a very faster computer. I always load several seconds before the delay even begins.
2) In general, do you recommend event sync or timer sync?
3) When I kick off a recording session, one of the preliminary messages is "Loading mission... as soon as this changes start moving!" or some such. What is the 'this'? Is it that tooltip message? Or is it the swtor loading screen? In other words, is it critical that I do not move until a certain event? And if so, what is that event?
4) Any particular reason why the default map configurations would not work, and need to be remapped a la the second two youtube videos in your first post? (I'm similarly curious about alternate scripts I see people posting).
Hope that's not too many questions. Thanks again!
Second - questions. I'm currently at lvl 44 doing lvl 40 imperial Sullis missions on timer sync. I tried event sync but my actions seemed to be out of sync by about a second. I may try again once I start botting 44clouds.
1) Any idea why my bot might become intermittently out of sync? Again, it looks like it's out of sync by a second or two. Sometimes this solves itself - with no manual intervention - after a failed mission. Sometimes it does not solve itself even with a game restart. It seems like this sort of thing would happen due to variable load times, but I have a 2000ms delay on using a very faster computer. I always load several seconds before the delay even begins.
2) In general, do you recommend event sync or timer sync?
3) When I kick off a recording session, one of the preliminary messages is "Loading mission... as soon as this changes start moving!" or some such. What is the 'this'? Is it that tooltip message? Or is it the swtor loading screen? In other words, is it critical that I do not move until a certain event? And if so, what is that event?
4) Any particular reason why the default map configurations would not work, and need to be remapped a la the second two youtube videos in your first post? (I'm similarly curious about alternate scripts I see people posting).
Hope that's not too many questions. Thanks again!