dude , im 50 on weapsmith and i have work order for 40 and 50p , why is it clicking 40p work order?¬.¬ is it normal or wut..
[Release] AionAutoCraft - Crafting Bot
10/05/2011 23:24
adi360#16
10/06/2011 18:24
Blastradius#17
Infinite Aion is a private server that brings their own set of protection schemes to the table; you either have to bypass those or ignore that server completely. You'd have to chip in some effort to get around it, or leave it be; in your case, I would suggest to ignore them.Quote:
I've only tested this with retail Aion, but I see no reason why it wouldn't work with other versions. Why did it not work for you?
10/07/2011 10:08
add3#18
How safe is this program to use?
10/13/2011 17:42
nilsmull#19
Cant make it work ..
10/14/2011 17:54
savagefarmer#20
It should be perfectly safe, since Macro Toolworks has many legitimate purposes outside of Aion, and it is not doing any memory reading/writing. Unless NCSoft puts every macro tool on Aion's process watchlist (which would be like shooting a mosquito with a canon) I don't see anyone getting into trouble over this.Quote:
How safe is this program to use?
If you are a little more specific, I can help you :)Quote:
Cant make it work ..
10/14/2011 20:05
omerbar#21
1 problem i can see
it only work for 1-199
these suckssss!!!!!
cous then i need to make myself
200-499 wich is alotttt of work alott!(and my char is alrdy in 130 so im fucked in that point)
it only work for 1-199
these suckssss!!!!!
cous then i need to make myself
200-499 wich is alotttt of work alott!(and my char is alrdy in 130 so im fucked in that point)
10/15/2011 11:35
krposzta#22
i have notebook, and i dont have insert key :D but i must re calibrate, and i cant.... somone know what i have to do?
10/15/2011 15:14
shadow4949#23
I'm pressing insert and nothing :(
10/15/2011 23:04
ChaosInc80#24
Having issues with this. I keep Aion on a 2nd monitor in windowed mode grinding my crafts while I work on homework on my main screen. I've run the calibrations and and it registers the button positions just fine (both ALT-Insert and CTRL-Insert. However, there seems to be an extra click happening that is messing everything up.
Settings (Shift-Insert)
NPC Mode: Select/Attack (I can't get the corner click to work in windowed)
Profession: Handicrafting
To station: No
From station: No
Wait time: 399
Auto Upgrade: No
Activate Macro
1) Bind Jump to Insert - DONE
2) Select/Attack NPC - OK
3) Select and Accept 2nd Workorder - OK
4) Character jumps, closing NPC window
5) Macro attempts to click where the Accept key is usually at, causing me to run away from the crafting station
5) Macro gets boned and I start running around randomly while it tries to click my crafting frame buttons (which are clicking fine as configured)
It's that consistent click after the crafting window closes that breaks it. I've tried to fix this repeatedly and have redone the configuration 6 times with no change. Also, there's a resizable white box that is sitting on my desktop that I have no idea what it's supposed to be there for.
Settings (Shift-Insert)
NPC Mode: Select/Attack (I can't get the corner click to work in windowed)
Profession: Handicrafting
To station: No
From station: No
Wait time: 399
Auto Upgrade: No
Activate Macro
1) Bind Jump to Insert - DONE
2) Select/Attack NPC - OK
3) Select and Accept 2nd Workorder - OK
4) Character jumps, closing NPC window
5) Macro attempts to click where the Accept key is usually at, causing me to run away from the crafting station
5) Macro gets boned and I start running around randomly while it tries to click my crafting frame buttons (which are clicking fine as configured)
It's that consistent click after the crafting window closes that breaks it. I've tried to fix this repeatedly and have redone the configuration 6 times with no change. Also, there's a resizable white box that is sitting on my desktop that I have no idea what it's supposed to be there for.
10/21/2011 19:58
cheev#25
Can anyone tell me if it's safe to use this on official russian server? BTW i can translate macro for russian gamers.
10/31/2011 11:22
savagefarmer#26
That shouldn't happen, I think you need to turn off 'click to move' or something in the Aion settings...Quote:
I believe that is a FreeMacroPlayer window, you can ignore it ;)Quote:
Yeah it should be perfectly safe, many people have used it on official servers without problems. There is a russian version floating around somewhere, but I don't remember where.Quote:
If you translate the macro I will gladly put it on my website. :)
11/01/2011 00:05
nuggaz#27
I tried it on InfiniteAion but it wont work for me. I think I did everything, spotted the camera, selected the steps etc....
I'm standing between the npc and the craftmachine pressing the insert (longer than a sec).
So basically it did not start to craft.
Do you have any idea?
Or yeah it might be that InfiniteAion has a good guarding skills?XD(so then i wont trying this)
I'm standing between the npc and the craftmachine pressing the insert (longer than a sec).
So basically it did not start to craft.
Do you have any idea?
Or yeah it might be that InfiniteAion has a good guarding skills?XD(so then i wont trying this)
11/05/2011 20:50
savagefarmer#28
Do you mean the mouse isn't moving at all after you press Insert? If that's the case then your FreeMacroPlayer is broken, and I can't fix that. Only the authors of that software can (you can contact them...). Let me know if you fix it! :)Quote:
I'm standing between the npc and the craftmachine pressing the insert (longer than a sec).
So basically it did not start to craft.
Do you have any idea?
Or yeah it might be that InfiniteAion has a good guarding skills?XD(so then i wont trying this)
11/13/2011 15:53
engenuine#29
Hi, first of all, thank you for creating a wonderful macro!
Unfortunately, I'm experiencing a few issues with it and I can't seem to get it to work :[
After installing FreeMacroPlayer, and opening up the AionAutoCraft 1.3 file,
1) when I run the ConfigurationWizard macro, nothing happens (however it switches
to another window, if Aion is open, it switches to Aion client).
2) So if I run the macro again, (by clicking or by Ctrl+Insert), it switches the window again to another one, and a few seconds later, shows "Corrupt INI file, closing AionAutoCraft" error. (error1.png) file.
3) If I go ahead and run the configuration macro again, for a few seconds it moves the mouse pointer to various locations and then launches a window of step 1/4. (second png file).
4) When I click okay, it shows step 2/4 (third png file).
5) Right after selecting craft profession and clicking ok, the macro shows
"Stopping.." message and exits out.
6) So then I would run the configuration again, and it would show 3/4 step window that isn't looking quiet normal (fifth png file).
7) Then it would show the last step window (sixth png) but it doesn't matter
from this point, because I need a macro that moves the character back and
forth - the step 3/4 didn't give me that option.
Please troubleshoot the issue !!! I am so eager to try out this macro, thank you so much! :)
Unfortunately, I'm experiencing a few issues with it and I can't seem to get it to work :[
After installing FreeMacroPlayer, and opening up the AionAutoCraft 1.3 file,
1) when I run the ConfigurationWizard macro, nothing happens (however it switches
to another window, if Aion is open, it switches to Aion client).
2) So if I run the macro again, (by clicking or by Ctrl+Insert), it switches the window again to another one, and a few seconds later, shows "Corrupt INI file, closing AionAutoCraft" error. (error1.png) file.
3) If I go ahead and run the configuration macro again, for a few seconds it moves the mouse pointer to various locations and then launches a window of step 1/4. (second png file).
4) When I click okay, it shows step 2/4 (third png file).
5) Right after selecting craft profession and clicking ok, the macro shows
"Stopping.." message and exits out.
6) So then I would run the configuration again, and it would show 3/4 step window that isn't looking quiet normal (fifth png file).
7) Then it would show the last step window (sixth png) but it doesn't matter
from this point, because I need a macro that moves the character back and
forth - the step 3/4 didn't give me that option.
Please troubleshoot the issue !!! I am so eager to try out this macro, thank you so much! :)
11/14/2011 15:32
savagefarmer#30
Hey, three things come to mind that you can try:Quote:
Unfortunately, I'm experiencing a few issues with it and I can't seem to get it to work :[
...
Please troubleshoot the issue !!! I am so eager to try out this macro, thank you so much! :)
- Remove the file aioncraft.config from the directory where the .fmp file is located. This will reset the settings.
- Replace the file aioncraft.ini from the directory where the .fmp file is located with the original aioncraft.ini provided in the download. This will reset the calibration points.
- Try running the macro with [Only registered and activated users can see links. Click Here To Register...].
Good luck!