[Release] RShinyBot

Page 13 of 28

10/21/2013 20:14 =Edy=#181

Quote:

Originally Posted by xRiDDi

Are you using v1.3b?

[Only registered and activated users can see links. Click Here To Register...]

This is currently designed like this, maybe I will change it in the future.

Okay, the HP Manual define you entered is incorrect, you have entered two colors rather than the locations of the HP Bar.
When you have the color picker tool (Ctrl + P), click on the upper left green pixel on your HP bar (not the one on the water), then you will recieve a value like Color Picked: 7000888 at (271, 116) <-- You need to place the sections in brackets into the variables, so hpx:=271; and hpy:=116;.

Now the seachart, unfortunately, it has found false values, as you can see, your scx2 and scy2 are infact larger than your client dimensions - which shows this is incorrect and you will need to use manual define.

Finally your MiniMap - do you have the treasure hunter? if you do not, then this error will show.
Is your minimap clearly visible?
If your answer for both of them is yes, then unfortunately you will need to use manual define.

As you are having issues with these 3, i suspect that your colors are different - that is the only way I can think of it not being able to recognize a single color.
Are you using 32bit Color?

Then make one which does!!!!!

Na, seriously, it works perfect for me, and has for a few others who have tested it.

Note:
Ive just decided, anyone from now on who leaves me messages in a manor such as above will receive no help from me what so ever for any of my scripts. I do welcome constructive criticism and issues people are having - explained in a polite, well described way. I am doing this for free after all.. :rolleyes:

I try now with v1.3b , but again cloase page , run 2-3h and again close page , if you cant/want help me:))
Thanks

10/21/2013 20:20 Gandalfilbianco#182

I work well I only changed the hours of consecutive work but it's all right

10/21/2013 20:37 omarby#183

I was using on my pc but ı bought a VDS it says color did not match cannot click can you help me ?

10/21/2013 23:55 elvis_arg#184

I tested 1.3b and on occasion after sinking the boat nautical chart is closed and only the main page. Thanks for help

10/22/2013 02:28 sahpediz#185

Starting 5 second start delay - Please switch to your Seafight screen.

HP has been found via Colour at 1143,295

SeaChart AutoDefined via Chat Colour: x1 = 289, y1 = 100, x2 = 1088, y2 = 686
If your SeaChart is NOT at this position, please use manual define.

MiniMap AutoDefined via BMP: x1 = 1173, y1 = 132, x2 = 1262, y2 = 221
If your MiniMap is NOT at this position, please use manual define.

RepButton AutoDefined: repx = 1159, repy = 700
If your RepButton is NOT at this position, please use manual define.

No Island has been found. :(

Successfully executed

(No Island has been found.) ?? please help me.

bot başlangı�ta iyi �alışıyordu iyi topluyordu ancak sonra durdu hi� hareket etmemeye başladı. bunun sebebi ne olabilir? bu sorunu nasıl ��zebilirim? yardımcı olursanız sevinirim... �zellikle t�rk�e bir cevap yazabilirseniz �ok teşekk�r ederim. :(

10/22/2013 10:58 Coc*#186

Hello xriddi
I have the same problem when sinking ship are often. the nautical chart is closed and go to shipyard to repair.
I'm using your Rshinybot all along, and the error is in all versions.
This is not a criticism ... DOING GREAT JOB :)

Sorry my bad english (google translator help me ;))

10/22/2013 11:01 tank16#187

Quote:

Originally Posted by omarby

I was using on my pc but ı bought a VDS it says color did not match cannot click can you help me ?

bana fiddleri ayarlamayı anlatırmısın burdaki bot i�in ben alttaki linkten bi şey anlamadım bi zahmet
[Release] Seafight custom client - Pixelbot edition

bu hataları veriyor
ERROR LOADING projectiles -> [Only registered and activated users can see links. Click Here To Register...] -> RELOADING in 5 sec...

<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>404 Not Found</title>
</head><body>
<h1>Not Found</h1>
<p>The requested URL /rocketid/test1.js was not found on this server.</p>
</body></html>

Fiddler - The file 'C:\Users\lenovo\Desktop\Yeni klas�r (2)\Seafight custom client - Pixelbot Edition\data\api\modified' was not found.

10/22/2013 12:56 trolleras9#188

Quote:

Originally Posted by sahpediz

Starting 5 second start delay - Please switch to your Seafight screen.

HP has been found via Colour at 1143,295

SeaChart AutoDefined via Chat Colour: x1 = 289, y1 = 100, x2 = 1088, y2 = 686
If your SeaChart is NOT at this position, please use manual define.

MiniMap AutoDefined via BMP: x1 = 1173, y1 = 132, x2 = 1262, y2 = 221
If your MiniMap is NOT at this position, please use manual define.

RepButton AutoDefined: repx = 1159, repy = 700
If your RepButton is NOT at this position, please use manual define.

No Island has been found. :(

Successfully executed

(No Island has been found.) ?? please help me.

bot başlangı�ta iyi �alışıyordu iyi topluyordu ancak sonra durdu hi� hareket etmemeye başladı. bunun sebebi ne olabilir? bu sorunu nasıl ��zebilirim? yardımcı olursanız sevinirim... �zellikle t�rk�e bir cevap yazabilirseniz �ok teşekk�r ederim. :(

just disable island avoidance and see if this works

10/22/2013 13:02 passit12#189

v1.4!

Ive changed the SysMessage check, now it should only check the left half of the window for the reconnect/repair when sunk button, that way, if a color matches on the 'Close' button, it shouldnt be pressed.
Ive also changed the drive, now, for instance if your ship is in the top left, and no shinys are on the minimap, it should now choose either Bottom left, or Top right to drive towards, instead of just Bottom Left as it used to - this has been done to help stop the bot from getting trapped between the guild island and a corner if you have island avoidance turned on.
If you have any other issues please let me know asap in detail.

RShinyBot v1.4 - 22/10/2013 Changelog:

Code:

[list][*]Improved SysMessage check[*]Changed drive to a more random drive.[*]Added another error message for AutoSeaChartDefine[/list]

Known Issues:

Code:

These are being worked on:[LIST][*][/LIST]

Planned:

Code:

[LIST][*] Further increase speed.[/LIST]

Notes:
Please make sure you are full rep when starting the bot!
The guild island avoidance feature does not mean it will not get hit by the towers, it means that if it does get hit by the towers, it will try to move away from the towers as fast as it can. Also, it will avoid shinys which are located around the towers.
Keeping this in mind, please be aware that there is still a chance you will get sunk by the island - however, this is considerably lower than if you did not use the island avoidance.

Thanks,
xRiddi

10/22/2013 13:03 3p4je#190

Quote:
Originally Posted by xRiDDi
v1.4!

Ive changed the SysMessage check, now it should only check the left half of the window for the reconnect/repair when sunk button, that way, if a color matches on the 'Close' button, it shouldnt be pressed.
Ive also changed the drive, now, for instance if your ship is in the top left, and no shinys are on the minimap, it should now choose either Bottom left, or Top right to drive towards, instead of just Bottom Left as it used to - this has been done to help stop the bot from getting trapped between the guild island and a corner if you have island avoidance turned on.
If you have any other issues please let me know asap in detail.

RShinyBot v1.4 - 22/10/2013 Changelog:
Code:
[list][*]Improved SysMessage check[*]Changed drive to a more random drive.[/list]
Known Issues:
Code:
These are being worked on:[LIST][*][/LIST]
Planned:
Code:
[LIST][*] Further increase speed.[/LIST]
Notes:
Please make sure you are full rep when starting the bot!
The guild island avoidance feature does not mean it will not get hit by the towers, it means that if it does get hit by the towers, it will try to move away from the towers as fast as it can. Also, it will avoid shinys which are located around the towers.
Keeping this in mind, please be aware that there is still a chance you will get sunk by the island - however, this is considerably lower than if you did not use the island avoidance.

Thanks,
xRiddi

Hello god,good work :handsdown:

10/22/2013 15:24 sahpediz#191

Quote:

Originally Posted by trolleras9

just disable island avoidance and see if this works

ben zaten 5 level ve altı haritalarda dolaşıyorum. bot bir ka� pırıltı topladıktan sonra duruyor. oyun haritasında ileri bir noktanın �zerine geliyor ama tıklayamıyor �ylece kalıyor.

10/22/2013 15:57 trolleras9#192

Quote:

Originally Posted by sahpediz

ben zaten 5 level ve altı haritalarda dolaşıyorum. bot bir ka� pırıltı topladıktan sonra duruyor. oyun haritasında ileri bir noktanın �zerine geliyor ama tıklayamıyor �ylece kalıyor.

if i understood well by google translate you said, you use it on maps 5 or 6.
5 level maps have an island so... try disabling island avoidance and see if this works

10/22/2013 16:05 sahpediz#193

Quote:

Originally Posted by trolleras9

if i understood well by google translate you said, you use it on maps 5 or 6.
5 level maps have an island so... try disabling island avoidance and see if this works

ok.
my level 5 I walk around 2-5 maps.

What should I do for it?
How to disable the avoidance of the island?

10/22/2013 16:49 trolleras9#194

line 43 , delete true and set to false

10/22/2013 16:55 sahpediz#195

Quote:

Originally Posted by trolleras9

line 43 , delete true and set to false

AvoidIsland:=false; //Set to true if you would like to Avoid Guild Islands, false if you do not.

but it still was not done in this way.
Is there another reason?

Page 13 of 28

« First

Last »