[Release] L2-Zur - Undetectable - Any L2 server/version

Hi, thanks for the bot! Only problem I have is with mana. Is it fully working?

Hey is there a way you can make the casting faster? I play WC and i depend on my steal essence to heal, if i cast too slow while being mobbed. It can cause a death. Great release btw.

Quote:

Originally Posted by L2-Zur Both of you, read the first post. Important notes section.

thx alot, works fine now, didnt see the part with background perfomance :)


Another "small" problem: Leveling my Archer with this great bot, in an Area with alot Mobs, so my char dont need to walk...after couple of minutes the bot kicks me out, closes lineage and says "stuck detected", anything to avoid this?

I had a problem while downloading: "There was an error while downloading the file, please try again" ,when i click the Launcher.exe . I use Win 7 - 64 bit.

Quote:

Originally Posted by UltimateManiac thx alot, works fine now, didnt see the part with background perfomance :) Another "small" problem: Leveling my Archer with this great bot, in an Area with alot Mobs, so my char dont need to walk...after couple of minutes the bot kicks me out, closes lineage and says "stuck detected", anything to avoid this?

This has been discussed and solutions were provided, please read through the thread.

Quote:

Originally Posted by mikeazn5k Hey is there a way you can make the casting faster? I play WC and i depend on my steal essence to heal, if i cast too slow while being mobbed. It can cause a death. Great release btw.

You can configure all the timers yourself, so just set them up how you need them.

Quote:

Originally Posted by FankyZ Hi, thanks for the bot! Only problem I have is with mana. Is it fully working?

There were a few reports of problems with mana, Im investigating it, altho it works fine for me.

Quote:

Originally Posted by iPlan I had a problem while downloading: "There was an error while downloading the file, please try again" ,when i click the Launcher.exe . I use Win 7 - 64 bit.

This can happen if the update server is down, check if the problem still happends a few hours later. If so, let me know.

I do not know how the other but for me it is too slow. Mob give 4-5 hits before check next target and attack him.

Quote:

Originally Posted by BotasL2 I do not know how the other but for me it is too slow. Mob give 4-5 hits before check next target and attack him.

Some of your config or colormaps are wrong. Whats the log saying that the bot is doing if you have Detailed Log enabled?

I'm trying to configure the HP heal to use a battle heal skill after targeting myself on a SE.

I made an ingame macro that starts with /target [character name] and then have it use greater battle heal. The character does this correctly, but then it doesn't re-target a mob. It will not continue to nuke the attacking mob after healing. It just remains self targeted. It will also not select another mob, it just keeps trying to do the F2 skill while self targeted.

Do you know how I can fix this so I can self heal, and then continue attacking mobs in range or mobs that are attacking me?

And with the buffs, when I try to configure a self buff (ie. empower) and make an in game macro with /target [character name] to target myself and then buff. But it then tells me to set a "self" macro or something. What exactly does this mean?

If you could give an explanation on how a mage/buffer class can self buff and self heal using skills and return to fighting afterwards I would greatly appreciate it. I watched both your videos, but I'm thinking maybe there is some trick for buff/heal skills.

Quote:

Originally Posted by chimigunga I'm trying to configure the HP heal to use a battle heal skill after targeting myself on a SE. I made an ingame macro that starts with /target [character name] and then have it use greater battle heal. The character does this correctly, but then it doesn't re-target a mob. It will not continue to nuke the attacking mob after healing. It just remains self targeted. It will also not select another mob, it just keeps trying to do the F2 skill while self targeted. Do you know how I can fix this so I can self heal, and then continue attacking mobs in range or mobs that are attacking me? And with the buffs, when I try to configure a self buff (ie. empower) and make an in game macro with /target [character name] to target myself and then buff. But it then tells me to set a "self" macro or something. What exactly does this mean? If you could give an explanation on how a mage/buffer class can self buff and self heal using skills and return to fighting afterwards I would greatly appreciate it. I watched both your videos, but I'm thinking maybe there is some trick for buff/heal skills.

Well, you can try to add Next Target action to the end of healing macro, and self macro is simply macro that targets you and you have to set it up in settings

Quote:

Originally Posted by chimigunga I'm trying to configure the HP heal to use a battle heal skill after targeting myself on a SE. I made an ingame macro that starts with /target [character name] and then have it use greater battle heal. The character does this correctly, but then it doesn't re-target a mob. It will not continue to nuke the attacking mob after healing. It just remains self targeted. It will also not select another mob, it just keeps trying to do the F2 skill while self targeted. Do you know how I can fix this so I can self heal, and then continue attacking mobs in range or mobs that are attacking me? And with the buffs, when I try to configure a self buff (ie. empower) and make an in game macro with /target [character name] to target myself and then buff. But it then tells me to set a "self" macro or something. What exactly does this mean? If you could give an explanation on how a mage/buffer class can self buff and self heal using skills and return to fighting afterwards I would greatly appreciate it. I watched both your videos, but I'm thinking maybe there is some trick for buff/heal skills.

The heal should NOT be a part of the self-target macro. A self-target macro should have only /target [character name] in it. The bot will use it before the heal key thats setup in the appropriate heal section. I would guess that you either have too long of a cast-time on your heal, or you colormaps are incorrect and the bot is not detecting that you have already healed back up.

Healing works as follows: Bot checks your HP -> if its under the limit -> Send self-macro key if its configured (this means your heal needs you to be targeted) -> send heal key -> wait for the casttime

Again with the buffs. Dont make a macro that has target-self and the buff in it at the same time. Just make a single self-target macro and then only assign buffs you want in the buff-macro. Its 2 separate macros. One only with self-target, other macro with the buffs you want to be cast on yourself. You dont even have to use macro for buffs, if there is less then 3 buffs you want to use.

Buffs work as follows: Bot checks if buffs are expired -> if its they are -> Send self-macro key (to target self for buffing) -> send buff keys (depending on which are expired) -> wait for the casttime

EDIT: added sequences for better understanding

Tested some functions and worked well, very nice..
but when the monsters isnt close to me, my character stop and dont do nothing trying to reach next target... what can i do to make him walk searching it?

Quote:

Originally Posted by Malombrado Tested some functions and worked well, very nice.. but when the monsters isnt close to me, my character stop and dont do nothing trying to reach next target... what can i do to make him walk searching it?

Watch the tutorial video and use the MobLists.

Quote:

Originally Posted by BotasL2 I do not know how the other but for me it is too slow. Mob give 4-5 hits before check next target and attack him.

Update_Lanucher=False
[Window Positions]
log[x]=1272
log[y]=366
[Key Settings]
Key_Target={F12}
Key_RangePull={F9}
Key_StartCombat={F11}
Key_Attack1={F6}
Attack1_CT=10000
Attack1_CD=300
Key_Attack2={F5}
Attack2_CT=5000
Attack2_CD=300
Key_Attack3={}
Attack3_CT=
Attack3_CD=
Key_Heal={}
Heal_CT=
Heal_CD=
Key_Mana={}
Mana_CT=
Mana_CD=
buff1_Enabled=False
buff1_CT=
buff1_rebuff=
buff2_Enabled=False
buff2_CT=
buff2_rebuff=
buff3_Enabled=False
buff3_CT=
buff3_rebuff=
Key_AfterCombat={F1}
Key_SelfMacro={}
Key_Loot={F1}
Looting_Enabled=True
HeavyLogging=True
[Advanced Settings]
PixelCaptureMode=1
[Colormap]
Player_HPLimitPos[0]=62
Player_HPLimitPos[1]=65
Player_HPLimitPos_Color=1
Player_MPLimitPos[0]=
Player_MPLimitPos[1]=
Player_MPLimitPos_Color=
Mob_IsSelectedPos[0]=567
Mob_IsSelectedPos[1]=47
Mob_IsSelectedPos_Color=0039342B
Mob_HPBar_AlivePos[0]=591
Mob_HPBar_AlivePos[1]=58
Mob_HPBar_AlivePos_Color=6
Mob_HPBar_DeadPos[0]=582
Mob_HPBar_DeadPos[1]=58
Mob_HPBar_DeadPos_Color=6
Player_Skill1_WatchPos[0]=634
Player_Skill1_WatchPos[1]=779
Player_Skill1_WatchPos_Color=00351E1F
Player_Skill2_WatchPos[0]=592
Player_Skill2_WatchPos[1]=783
Player_Skill2_WatchPos_Color=00420831
Player_Skill3_WatchPos[0]=
Player_Skill3_WatchPos[1]=
Player_Skill3_WatchPos_Color=

Quote:

Originally Posted by BotasL2 setting.ini here

Settings seem fine, however, what does the log window say when the bot is waiting to target the mob?

Quote:

Originally Posted by L2-Zur Settings seem fine, however, what does the log window say when the bot is waiting to target the mob?

5:27:13 - No mobs nearby, targeting from MobList
15:27:15 - MobList sent '/target Langk'
15:27:19 - MobList sent '/target Vuku'
15:27:21 - No mobs from MobList found.

15:27:21 - Checking for next target - {F12} sent
15:27:22 - Checking for next target - {F12} sent
15:27:23 - Checking for next target - {F12} sent

15:27:24 - No mobs nearby, targeting from MobList
15:27:25 - MobList sent '/target Langk'
15:27:26 - Found a mob from MobList, engaging.

15:27:26 - Mob targeted - engaging
15:27:26 - StartCombat key - {F11} sent
15:27:27 - Engaging mob - {F6} sent
15:27:37 - Checking for next target - {F12} sent

15:27:38 - Looting started
15:27:38 - Looting - {F1} sent
15:27:39 - Looting - {F1} sent
15:27:40 - Looting - {F1} sent
15:27:41 - Looting finished

15:27:41 - Checking for next target - {F12} sent
15:27:42 - Checking for next target - {F12} sent
15:27:43 - Checking for next target - {F12} sent
15:27:44 - Checking for next target - {F12} sent

15:27:46 - No mobs nearby, targeting from MobList
15:27:46 - MobList sent '/target Langk'
15:27:47 - Found a mob from MobList, engaging.

15:27:47 - Mob targeted - engaging
15:27:48 - StartCombat key - {F11} sent
15:27:48 - Engaging mob - {F6} sent
15:27:59 - Engaging mob - {F6} sent
15:28:09 - Checking for next target - {F12} sent

15:28:10 - Mob targeted - engaging
15:28:11 - StartCombat key - {F11} sent
15:28:11 - Engaging mob - {F6} sent
15:28:21 - Checking for next target - {F12} sent

15:28:22 - Looting started
15:28:22 - Looting - {F1} sent
15:28:23 - Looting - {F1} sent
15:28:24 - Looting - {F1} sent
15:28:25 - Looting - {F1} sent
15:28:26 - Looting finished