[Tool] LogSro ~The Auto-Login Script~

stressless · 05/11/2008, 18:20

Quote:

Originally Posted by mrdiddly

i get the firus allert with server list 2. its not a virus, i know that. im still trying to use it but it says that Windows cant access it and i dont have permission to access this file. im still trying to get that figured out...

I have the same problem, i also took down my anti-virus for a couple of seconds to test it without any anti-virus.
Even than it keep saying: Windows cant access it and i dont have permission to access this file
It didnt give any virus alert, but haha, my antivirus was down....

InvincibleNoOB · 05/11/2008, 18:24

Source

Quote:

Originally Posted by "SourceCode";Decompiled by InvincibleNoOB

#Include <GUIConstants.au3>
OPT("TrayIconHide", 1)
#Region ### START Koda GUI section ### Form=Cocuments and SettingsHusainDesktopLogSro Edit.kxf
SFORM1= GUICREATE("LogSro v1.0.1", 402, 500, @DESKTOPWIDTH - 408, 0)
GUISETICON("Resoursesicon.ico")
GUISETBKCOLOR(12087904)
GUICTRLCREATETAB(0, 303, 401, 195)
GUISETBKCOLOR(12087904)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
GUICTRLSETRESIZING(- 1, SGUI_DOCKWIDTH + SGUI_DOCKHEIGHT)
STABSHEET1= GUICTRLCREATETABITEM(" Guide ")
SEDIT1= GUICTRLCREATEEDIT("", 0, 328, 401, 169, BITOR(SES_AUTOVSCROLL, SES_AUTOHSCROLL, SES_READONLY, SES_WANTRETURN, SWS_VSCROLL, SWS_BORDER))
GUICTRLSETDATA(- 1, STRINGFORMAT("=====================rn------- How it Works ? ---------rn======================rnrn1- Modify Config.rn A- Choose your Sro Resolutionrn B- Set your Refresh rate for the "& CHR(34)& "Sro Server List"& CHR(34)& " between 0 and 5.rn C- Hit on Apply Therernrn2- Open your Sro Server List. ( See "& CHR(34)& " Downloads"& CHR(34)& _
" Tab if you dont have it)rnrn3- Choose your server from the list. Yes, I mean it. Just make sure it isrn Highlighted with a BLUE* back color.rnrn* This Script is limited to Work only on the Original blue Scheme ofrn Windows Xp. (am not sure if it works on other Blues than that Scheme. But rn am Positive about that it wont work on Vista. Sorry if you got Vista already. I rn will try either to remove that limit in my further versions of LogSro or even make rn an edited Script for vista. Maybe you can work out by changing your SCHEMErn of your desktop to a blue one )rnrn4- Arrange the servers to show the most free slot serverrnrn3- Launch your game by either using Testosterone or a No-Dc Client rn ( See Downloads Tab if you dont have any of them )rnrn5- Type in your Account ID and Password and then the image code all Normallyrn . ( DO NOT PRESS CONFIRM, YET )rnrn6- Alt=Tape to LogSro . Make Sure that you done the previous steps all rn correctly and then Press Start Script.rnrn7- Right Now, The Script is doing the rest for you. I recommend that you do rn not interfere by either changing the values in the Config while the Script is on rn or moving the widows around..Do Not also try to move your mouse much as rn it might crush the whole thing down.rnrn8- The Script main idea is to press the Refresh Button of the Sro Server List rn every "& CHR(34)& " X "& CHR(34)& " Seconds ( "& CHR(34)& " X "& CHR(34)& _
" is to be set as you desire in the config Tab ). rn After each time the refresh is pressed. The Script will look up the whole Firstrn 10 Rows in that list for a FREE SLOT**. Then , After a Free Slot is found by rn the Script, The Script will end up pressing the confirm button instantly.rnrn** Another Limitation is here . The Script will only look at the First Figurern there under the free column. Which means that the numbers 10 , 20 , 30 ......rn etc will be considered as "& CHR(34)& " 0 "& CHR(34)& " to the script !!. Which means that it wont hit rn the confirm at that moment. ( I know that its of a big deal but I just wanted to rn mention it so you wont be happy when you notice it by yourself !! .rn rnrnHints about Refresh Rate :rn rnrnA- If the refreshing rate was Too Fast i.e. close to every 0 seconds , the scriptrn might not have the enough time visualize the colors in your screen due to arn lagging at that time.rnrnB- If the Refreshing rate was Too Slow i.e. close to every 5 secondsrn , the Script will have a higher chance of missing the right moment. ( I thinkrn you will go for choice A above )rnrnC- You have to know your own refreshing bu yourself. It all depends on your computer performance. So if you think you got the best PC go for Every "& CHR(34)& "ZERO"& CHR(34)& " Seconds I would say.rnrnD- ANY number BETWEEN "& CHR(34)& " 0 "& CHR(34)& " and "& CHR(34)& " 5 "& CHR(34)& " can be put as the Refresh Ratern Value. i.e. "& CHR(34)& " 0.01 "& CHR(34)& " is valid as well as "& CHR(34)& " 1.00002345 "& CHR(34)& " .In Fact , I don"& CHR(39)& _
"t you will need to put more than 2 there.( I have just difine it between 0 and 5 because it look better ).rnrn9- Last thing, most of the errors written in the Script are personally typed by me.rnI hope that they are not very mean. ohh ... and one other limit to mention rn( I know that you like limits ), The Config settings will not be saved after rnyou close LogSro. So don"& CHR(39)& " t forgot to set them up again after each timern you open LogSro.rn Thanx For Reading and rn GOOD LUCK LOGINING IN !!rnrnRegards,rnHussertrnrn"))
STABSHEET2= GUICTRLCREATETABITEM(" Config ")
SRADIO1= GUICTRLCREATERADIO("Radio1", 24, 368, 17, 17)
GUICTRLSETCURSOR(- 1, 0)
SRADIO2= GUICTRLCREATERADIO("Radio2", 24, 408, 17, 17)
GUICTRLSETCURSOR(- 1, 0)
SRADIO3= GUICTRLCREATERADIO("Radio1", 24, 448, 17, 17)
GUICTRLSETCURSOR(- 1, 0)
SLABEL1= GUICTRLCREATELABEL("800 x 600", 48, 368, 51, 17)
SLABEL2= GUICTRLCREATELABEL("1024 x 768", 48, 408, 57, 17)
SLABEL3= GUICTRLCREATELABEL("1152 x 864", 48, 448, 57, 17)
SGROUP1= GUICTRLCREATEGROUP("Sro Resolution", 16, 336, 137, 145)
GUICTRLSETBKCOLOR(- 1, 16777215)
GUICTRLCREATEGROUP("", - 99, - 99, 1, 1)
SINPUT1= GUICTRLCREATEINPUT("0.5", 192, 380, 73, 21)
SLABEL14= GUICTRLCREATELABEL("Second/s", 272, 384, 51, 17)
SBUTTON12= GUICTRLCREATEBUTTON("Apply", 264, 456, 89, 25, 0)
SGROUP2= GUICTRLCREATEGROUP("Refresh Rate", 168, 336, 185, 105)
GUICTRLCREATEGROUP("", - 99, - 99, 1, 1)
STABSHEET4= GUICTRLCREATETABITEM(" FAQs ")
SEDIT2= GUICTRLCREATEEDIT("", 0, 328, 401, 169, BITOR(SES_AUTOVSCROLL, SES_AUTOHSCROLL, SES_READONLY, SES_WANTRETURN, SWS_VSCROLL, SWS_BORDER))
GUICTRLSETDATA(- 1, STRINGFORMAT("[ Coming Soon ]rnrn** If you still need any help Help After Reading The Guide you can go for the rn"& CHR(34)& " Online Help "& CHR(34)& " Button there. It will link you Directly to my thread in rnelitepvpers.com.rnrnrnRegards, rnHussert"))
STABSHEET5= GUICTRLCREATETABITEM(" Updates ")
SEDIT3= GUICTRLCREATEEDIT("", 0, 328, 401, 169, BITOR(SES_AUTOVSCROLL, SES_AUTOHSCROLL, SES_READONLY, SES_WANTRETURN, SWS_VSCROLL, SWS_BORDER))
GUICTRLSETDATA(- 1, STRINGFORMAT("===================rn----------- 1st Thought ------rn------ ( 4 - May - 2008 ) ----rn===================rnrnThe first actual form of the idea of LogSro was actually done by anotherrnScripting program called Quick Macro. A video was established to show rnthe idea in you Tube.rnrnLink : video was only to show the idea with no link to get the Q-Macro Script.rnThe reason is that the Script was basedon a lot of Limititaions like positon ofrnthe Sro Server List should not be changed. And also should in specific place rnnear the confirm button.. So , the Script was then refomed to work in Autoit.rnA lot of limitations were covered by Autoit.In Addition , its more easier to be rnfigured out by anyone as it in a form of a GUI ( window ).rnrnrnrn====================rn------------ v1.0.0 ---------------rn----- ( 7 - May - 2008 ) ------rn====================rnrnThis version , also , was not formed completly. Only pictures of the fist look rnof LogSro in an actual GUI ( window ) were given in one of threads in rn***********.comrnrnLink : rnrnhttp://www.***********.net/forums/silkroad-online-hacks-bots-downloads/rn100292-sro-login-problem-discussion-board.htmlrnrnDuring that time , The Loop Funciot of the Script was still under progress byrnme. I"& CHR(39)& _
"ve decided to change the number of the version when I have completedrnthe Script as the form of the tool was changedrnrnrn=======================rn------------------ v1.0.1 ----------------rn-------- ( 9 - May - 2008 ) ---------rn=======================rnrnFinally , After going through most of the basics and the commands in AutoItrnfor 5 days , The first working Script of LogSro was Finished !!.rnrnLink : rnhttp://www.elitepvpers.com/forum/sro-exploits-hacks-bots-rn guides/134171-tool-logsro-auto-login-script.htmlrnrnrn============================rnTha nks for reading and using LogSrornrn"))
STABSHEET6= GUICTRLCREATETABITEM(" Downloads ")
SBUTTON4= GUICTRLCREATEBUTTON("Testosterone ", 8, 352, 81, 25, 0)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SBUTTON5= GUICTRLCREATEBUTTON("NO-DC Client", 8, 384, 81, 25, 0)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SBUTTON6= GUICTRLCREATEBUTTON("AgBot", 8, 416, 81, 25, 0)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SBUTTON7= GUICTRLCREATEBUTTON("ServerList", 8, 448, 81, 25, 0)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL15= GUICTRLCREATELABEL(" Tool ", 32, 328, 32, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
GUICTRLSETBKCOLOR(- 1, 16776176)
SLABEL16= GUICTRLCREATELABEL("Version", 104, 328, 43, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
GUICTRLSETBKCOLOR(- 1, 16777215)
SLABEL17= GUICTRLCREATELABEL("Description", 192, 328, 64, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
GUICTRLSETBKCOLOR(- 1, 16777215)
SBUTTON8= GUICTRLCREATEBUTTON("Go", 336, 352, 25, 25, 0)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SBUTTON9= GUICTRLCREATEBUTTON("Go", 336, 384, 25, 25, 0)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SBUTTON10= GUICTRLCREATEBUTTON("Go", 336, 416, 25, 25, 0)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL18= GUICTRLCREATELABEL("Guide", 336, 328, 34, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL19= GUICTRLCREATELABEL("1.6.3v5", 100, 417, 42, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL20= GUICTRLCREATELABEL("1.144/1.145", 96, 384, 64, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL21= GUICTRLCREATELABEL("1.0.0.5", 104, 456, 39, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL22= GUICTRLCREATELABEL("Shows free slots on Sro servers.", 160, 456, 170, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL23= GUICTRLCREATELABEL("Muliclient, No-Dc, oo Zoom, .....", 160, 360, 165, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL24= GUICTRLCREATELABEL("v6.11b", 104, 360, 36, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL25= GUICTRLCREATELABEL("Prevents Dissconnection", 160, 384, 129, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
SLABEL26= GUICTRLCREATELABEL("Free Sro Bot", 160, 416, 69, 19)
GUICTRLSETFONT(- 1, 8, 400, 0, "Comic Sans MS")
STABSHEET7= GUICTRLCREATETABITEM("***** Credits *****")
SEDIT4= GUICTRLCREATEEDIT("", 0, 328, 401, 169, BITOR(SES_AUTOVSCROLL, SES_AUTOHSCROLL, SES_READONLY, SES_WANTRETURN, SWS_VSCROLL, SWS_BORDER))
GUICTRLSETDATA(- 1, STRINGFORMAT("==================rn- - - - - - LogSro - - - - - rn==================rnLogSro is an AutoIt Script ceated by Hussert to login into Silkroad Quicker.rnThe tool mainly depends on the Sro Server List Created By Rumata. In this tab rnyou will see the Credits for the Links mentioned in the Download Tab in rnLogSro..rnrnLogSro will be Updated in My thread in elitepvper about every week.The rnUpdates will mainly include covering up limits of the Script, FAQs about LogSro,rnNew Links and more !!. So you might like to Check the thread from week to rn week to check for a new version of LogSro. rnrnrnLink to my Thread :rnrnhttp://www.elitepvpers.com/forum/sro-exploits-hacks-bots-rn guides/134171-tool-logsro-auto-login-script.htmlrnrn==================rn- - - - - - Credits - - - - - -rn==================rnrn1- Testosterone - - - - > Rumatarn [ ]rnrn2- No-Dc Client - - - - - > GreYFoX"& CHR(39)& "srn [ ]rnrn 3- Agbot - - - - - - - - - - -> Rev6.comrn [ ]rnrn4- Sro Server List - - - - > Rumatarn [ ]rnrnrn===================rnrnThanks For Using LogSrornrn===================="))
GUICTRLCREATETABITEM("")
SBUTTON1= GUICTRLCREATEBUTTON("Start Script", 16, 248, 73, 33, SBS_DEFPUSHBUTTON)
SBUTTON3= GUICTRLCREATEBUTTON("Online Help", 296, 248, 97, 33, SBS_DEFPUSHBUTTON)
SPIC1= GUICTRLCREATEPIC("ResoursesSilkroad_Online.jpg", 0, 0, 401, 305, BITOR(SSS_NOTIFY, SWS_GROUP, SWS_BORDER, SWS_CLIPSIBLINGS))
SBUTTON2= GUICTRLCREATEBUTTON("Stop Script", 16, 248, 73, 33, SBS_DEFPUSHBUTTON)
GUISETSTATE(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
GLOBAL SSHOW1= GUISETSTATE(SBUTTON1, SGUI_SHOW)
GLOBAL SSHOW2= GUISETSTATE(SBUTTON2, SGUI_SHOW)
GLOBAL SHIDE1= GUISETSTATE(SBUTTON1, SGUI_HIDE)
GLOBAL SHIDE2= GUISETSTATE(SBUTTON2, SGUI_HIDE)
GUICTRLSETSTATE(SBUTTON2, SGUI_HIDE)
WHILE 1
SNMSG= GUIGETMSG()
SIN1= GUICTRLREAD(SINPUT1)
SIN2= SIN1* 1000
SWITCH SNMSG
CASE SGUI_EVENT_CLOSE
EXIT
CASE SBUTTON4
MSGBOX(0, " Testosterone ** Credits ** ", " Link : "& @LF& " Created By : Rumata & Homez "& @LF& @LF& "Press Ok To Direct you to Testosterone ")
SOIE= _IECREATE("http://www.recyfer.info/index.php/Testosterone")
CASE SBUTTON8
MSGBOX(0, " Testosterone ( F.A.Q ) ** Credits ** ", " Link : "& @LF& " Created By : Rumata & Homez "& @LF& @LF& "Press Ok To Direct you to Testosterone ( F.A.Q ) ")
SOIE= _IECREATE("http://www.recyfer.info/index.php/Testosterone:FAQ")
CASE SBUTTON5
MSGBOX(0, " Sro No-Dc Client ** Credits ** ", " Link : "& @LF& " Created By : GreYFoXGTi "& @LF& @LF& "Press Ok To Direct you to Sro No-Dc Client ")
SOIE= _IECREATE("http://www.elitepvpers.com/forum/sro-exploits-hacks-bots-guides/120225-greyfox-s-nodc-clients-1-145-1-144-a.html")
CASE SBUTTON9
MSGBOX(0, " Sro No-Dc Client ( How To Set It Up ) ** Credits ** ", " Link : "& @LF& " Created By : GreYFoXGTi "& @LF& @LF& "Press Ok To Direct you to Sro No-Dc Client ( How To Set It Up ) ")
SOIE= _IECREATE("http://toolsera.com/No-DC%20Install.html")
CASE SBUTTON6
MSGBOX(0, " Agbot ** Credits ** ", " Link : "& @LF& " Created By : Rev6 "& @LF& @LF& "Press Ok To Direct you to Agbot ")
SOIE= _IECREATE("http://rev6.nihplod.com/index.php/AgBot")
CASE SBUTTON10
MSGBOX(0, " Agbot ( Guide ) ** Credits ** ", " Link : "& @LF& " Created By : Rev6 "& @LF& @LF& "Press Ok To Direct you to Agbot ( Guide ) ")
SOIE= _IECREATE("http://rev6.nihplod.com/index.php/Guide")
CASE SBUTTON7
MSGBOX(0, " ** Credits ** ", " Link : "& @LF& " Created By : Rumata & Homez "& @LF& " Subject : Sro Server List ")
SOIE= _IECREATE("http://www.recyfer.info/index.php/ServerList")
CASE SBUTTON3
MSGBOX(0, " Visit My Thread ", " Note : Please Read The First Post There , Then the replies below before you reply with your problem ")
SOIE= _IECREATE("http://www.elitepvpers.com/forum/sro-exploits-hacks-bots-guides/134171-tool-logsro-auto-login-script.html")
CASE SBUTTON12
IF SIN1< 0 THEN
MSGBOX(0, " Error in Speed Tab ", " Please change the value in the Refresh Rate ( Must Be Between < 0 , 5 > ) ")
ENDIF
IF SIN1> 5 THEN
MSGBOX(0, " Error in Speed Tab ", " Please change the value in the Refresh Rate ( Must Be Between < 0 , 5 > ) ")
ELSE
IF BITAND(GUICTRLREAD(SRADIO1), SGUI_CHECKED) THEN
MSGBOX(0, " Done ! ", @LF& " Refresh Rate ---------> every "& SIN1& " Second/s !! "& @LF& @LF& " Sro Resolution --------> 800x600 "& @LF& @LF& " Note : make sure that you set your resolution right !! ")
ENDIF
IF BITAND(GUICTRLREAD(SRADIO2), SGUI_CHECKED) THEN
MSGBOX(0, " Done ! ", @LF& " Refresh Rate ---------> every "& SIN1& " Second/s !! "& @LF& @LF& " Sro Resolution --------> 1024x768 "& @LF& @LF& " Note : make sure that you set your resolution right !! ")
ENDIF
IF BITAND(GUICTRLREAD(SRADIO3), SGUI_CHECKED) THEN
MSGBOX(0, " Done ! ", @LF& " Refresh Rate ---------> every "& SIN1& " Second/s !! "& @LF& @LF& " Sro Resolution --------> 1152x864 "& @LF& @LF& " Note : make sure that you set your resolution right !! ")
ENDIF
ENDIF
CASE SBUTTON1
IF BITAND(GUICTRLREAD(SRADIO1), SGUI_UNCHECKED) AND BITAND(GUICTRLREAD(SRADIO2), SGUI_UNCHECKED) AND BITAND(GUICTRLREAD(SRADIO3), SGUI_UNCHECKED) THEN
MSGBOX(0, " Error in Config Tab >> Sro Resolution ", " Please choose your Sro Resolution ")
ELSE
IF WINEXISTS("Sro Server List") THEN
WINACTIVATE("Sro Server List")
GUICTRLSETSTATE(SBUTTON1, SGUI_HIDE)
GUICTRLSETSTATE(SBUTTON2, SGUI_SHOW)
DO
IF GUICTRLREAD(GUIGETMSG(SBUTTON2)) THEN
GUICTRLSETSTATE(SBUTTON2, SGUI_HIDE)
GUICTRLSETSTATE(SBUTTON1, SGUI_SHOW)
EXITLOOP
ELSE
CONTROLCLICK("Sro Server List", "&Refresh", 1002, "Primary", 1)
SLEEP(SIN2)
SW= WINGETPOS("Sro Server List")
SVAR1= PIXELGETCOLOR(SW[0] + 219, SW[1] + 60 - 2)
SVAR2= PIXELGETCOLOR(SW[0] + 219, SW[1] + 74 - 2)
SVAR3= PIXELGETCOLOR(SW[0] + 219, SW[1] + 88 - 2)
SVAR4= PIXELGETCOLOR(SW[0] + 219, SW[1] + 102 - 2)
SVAR5= PIXELGETCOLOR(SW[0] + 219, SW[1] + 116 - 2)
SVAR6= PIXELGETCOLOR(SW[0] + 219, SW[1] + 130 - 2)
SVAR7= PIXELGETCOLOR(SW[0] + 219, SW[1] + 144 - 2)
SVAR8= PIXELGETCOLOR(SW[0] + 219, SW[1] + 158 - 2)
SVAR9= PIXELGETCOLOR(SW[0] + 219, SW[1] + 172 - 2)
SVAR10= PIXELGETCOLOR(SW[0] + 219, SW[1] + 186 - 2)
SH1= HEX(SVAR1, 6)
SH2= HEX(SVAR2, 6)
SH3= HEX(SVAR3, 6)
SH4= HEX(SVAR4, 6)
SH5= HEX(SVAR5, 6)
SH6= HEX(SVAR6, 6)
SH7= HEX(SVAR7, 6)
SH8= HEX(SVAR8, 6)
SH9= HEX(SVAR9, 6)
SH10= HEX(SVAR10, 6)
SCC1= STRING("FFE9E3")
SCC2= STRING("316AD9")
SCC3= STRING("316ACF")
SCC4= STRING("E3D3EC")
SCC5= STRING("316AC5")
SCC6= STRING("31A2EC")
LOCAL SXR= 485, SYR= 395
IF BITAND(GUICTRLREAD(SRADIO1), SGUI_CHECKED) THEN
IF SH1= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
ENDIF
LOCAL SXR= 600, SYR= 500
IF BITAND(GUICTRLREAD(SRADIO2), SGUI_CHECKED) THEN
IF SH1= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
ENDIF
LOCAL SXR= 725, SYR= 525
IF BITAND(GUICTRLREAD(SRADIO3), SGUI_CHECKED) THEN
IF SH1= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH1= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH2= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH3= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH4= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH5= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH6= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH7= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH8= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH9= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC1 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC2 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC3 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC4 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC5 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
IF SH10= SCC6 THEN
MOUSECLICK("Primary", SXR, SYR, 1, 0)
GUICTRLSETDATA(SBUTTON1, "Start Scirpt")
EXITLOOP
ENDIF
ENDIF
ENDIF
UNTIL SNMSG= SBUTTON2
GUICTRLSETSTATE(SBUTTON2, SGUI_HIDE)
GUICTRLSETSTATE(SBUTTON1, SGUI_SHOW)
ELSE
MSGBOX(0, " Error -1- ", "Please Open Up Your Server List")
ENDIF
ENDIF
ENDSWITCH
WEND

Won't post the includes ,so the newbies won't leech it.
It's clean,you've got my confirmation.

stressless · 05/11/2008, 18:28

Even than, i still cant use it, i cant open it

EDIT: right click on it, and press run as!!! than it works !!!!

Hussert · 05/11/2008, 18:55

Quote:

Originally Posted by stressless

Even than, i still cant use it, i cant open it

EDIT: right click on it, and press run as!!! than it works !!!!

* will be added in FAQs

I was About to Reply you with that solution. I believe you are using vista. Thanks for sharing .

Quote:
Originally Posted by InvincibleNoOB
Source
Code:
Originally Posted by "SourceCode";Decompiled by InvincibleNoOB
 .......
Won't post the includes ,so the newbies won't leech it.
It's clean,you've got my confirmation.

THANKS A LOT , InvincibleNoOB ...

I will make sure that your post is posted under my point there ( Execpt for my long script).

I always wanted to decompile an .exe file like you did their.
I will seek the method within olly tutorials. YOU ARE THE BEST !!

Quote:
Updated !!

The Following were added :

.

Quote:

* NowUpload * ----->

* Instead of Media Fire Link

Quote:

NO REPLIES ABOUT RISKY VIRUSES.
Everyone is familiar with the fact that some botting/hack files used for
silkroad is containing some viruses. I KNOW THAT THERE IS A TROJAN EVEN !!.
However they wont damage your pc. I NEED A MOD TO CONFIRM THIS POINT
FOR ME , PLEASE .
Quote:
Originally Posted by InvincibleNoOB
Source
Code:
 .......
Won't post the includes ,so the newbies won't leech it.
It's clean,you've got my confirmation.
.

mrdiddly · 05/11/2008, 20:14

Quote:

Originally Posted by stressless

Even than, i still cant use it, i cant open it

EDIT: right click on it, and press run as!!! than it works !!!!

ok im starting to think that i should quit tryingto get the server list thing to work. ive tried what you said over and over and i still get the same problem. i finally got agbot to work ( i was missing library files) so im gonna try that out.

b00n0 · 05/11/2008, 20:30

thx man i really ganna try it out

works on vista i saw too... nice !

Hussert · 05/11/2008, 20:36

Quote:

Originally Posted by b00n0

thx man i really ganna try it out

works on vista i saw too... nice !

Glad that you are gonna try it...

But I didnt say that its working in vista , or did I

CihanSZ · 05/11/2008, 20:48

I don´t understnd it i have made it and i have start sro few and tehn it work it nice !

linuxhell · 05/11/2008, 21:27

youtube shows entering when the first of serverlist (free slot 2)
but here enters with slots 0 or 1 and appearing very traffic message

Hussert · 05/11/2008, 22:37

[quote]

Quote:

Originally Posted by CihanSZ

I don´t understnd it i have made it and i have start sro few and tehn it work it nice !

Iam not sure but I think there is a missing word there or ....

Quote:

Originally Posted by linuxhell

youtube shows entering when the first of serverlist (free slot 2)
but here enters with slots 0 or 1 and appearing very traffic message

That Video in youtube is only to show the begining of the idea of LogSro. That was a different Script made in QMacro back then )

[ EDITED ]

Change your Color Quality to 32 bit ( See Limits Section )

* will be added as a FAQs

I think I will make Video to show the full potential of LogSro that Iam getting in my Pc. I will show you even the Color of the Default Blue xp Scheme that the script needs to work.

Sorry for the troubles but this a Script under developing. I have posted it the moment I got it to work under few limits.

Thanx

.

balient · 05/11/2008, 23:32

i dont know whats wrong with my list. i dl logsro and click sever list and i dl it.
but when im don it was not working and had blank websites. and kept on saying open or save. pls help me. o yea, if im replying to some 1 sorry im new here.

Hussert · 05/11/2008, 23:59

Quote:

Originally Posted by balient

i dont know whats wrong with my list. i dl logsro and click sever list and i dl it.
but when im don it was not working and had blank websites. and kept on saying open or save. pls help me. o yea, if im replying to some 1 sorry im new here.

I heard about this problem a lot....

Iam not sure what the cause of it but I would say try the following :

- Extract to folder where located Media.pk2 for target version

- If you are using Vista , then Right Click >> Open as >> Adminstrtator

- Redownload the Server List ( Use The Official Link. you can find in the LogSro )

If any of the above worked the problem Please tell me which one was it so I can add it as a FAQs for everyone else.

CihanSZ · 05/12/2008, 10:35

@hussert it´s nothing is working perfect!

edwerd · 05/12/2008, 11:08

Yea gd working i like it

Hussert · 05/12/2008, 11:43

Quote:

Originally Posted by CihanSZ

@hussert it´s nothing is working perfect!

The tool is still not working with any pc. It still got its own conditions to make into account.

Quote:

Originally Posted by thekiller99

is this for conquer?

wrong place , I would say ... This is a Silkroad Thread

Quote:

Originally Posted by edwerd

Yea gd working i like it

Thanx ... but could you Confirm that its working ...

I need Someone to confirm that its working with him ...