[TUT] Dekaron Sea Vac Hack & Non Aggro

[{^_^}]

First of all, I didn't make this hack. I just followed the tut's from weirn10, InstantDeath, run4fun2222, Robur, MasterShouter, zschwartz and mithandir1. ALL CREDIT GOES TO THEM. I just copied (copy and paste) from their tutorials.

Here are the steps:
1.) Download Winhex Version 15.1 and use this to register.

Name: "mazuki"
Addr1: "mazuki"
Addr2: "darksiderg"
Key1: 2DBB9E5341FE627B18B1DF45EA900C87
Key2: 16A475C08C71A4FFDA81B95A0799C5C2
Chksm: 55

2.) Backup your pack.d04 from you data file folder.

3.) Run winhex and open your pack.d04 file.

4.) Click on options and then click on Edit Mode.


5.) Optional: So that you can read the values clearly, go to 'View' and tick 'Text Display Only' or just hit 'F7'.

Making Melee mobs to Non Aggro, follow this:
1.) I'll be using Lasputin Knight as an example here. Press 'alt + g' then type this D2079C0. Or you can press 'ctrl + f' then type 1701,Lasputin Knight,0. It will point you to the same direction.


2.) So let's swap the two values here, red and magenta.

1701,Lasputin Knight,0,28,56,14056,0,302,432,10,50,2,6,0,0,0,0,0 ,0,5,0,0,0,2,4.5,1,1,rasputinknight,ÀÛ¼ºÁß,1158,23 5,318,35000,1,1,3,140,105,117,117,2,18,4,647,809,23,54,3,2200,10001 01,0,0,0,0,0,0,0,0,0,0,23,54,0,0,0,0,0,0,0,0,0,0,0 ,0,0,23,54,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,460,1 0,0,0,23,421,24,351,25,211,0,0,109,374,110,312,111 ,187,502,8,403,47,209,673,452,109,0,0,0,0,0,0,0,0

red = AI value
magenta = not sure about this, just copied from other tut's

3.) After we swap, it should look like this.

1701,Lasputin Knight,0,28,56,14056,0,302,432,10,50,2,6,0,0,0,0,0 ,0,5,0,0,0,2,4.5,1,1,rasputinknight,ÀÛ¼ºÁß,1158,23 5,318,35000,3,1,1,140,105,117,117,2,18,4,647,809,23,54,3,2200,10001 01,0,0,0,0,0,0,0,0,0,0,23,54,0,0,0,0,0,0,0,0,0,0,0 ,0,0,23,54,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,460,1 0,0,0,23,421,24,351,25,211,0,0,109,374,110,312,111 ,187,502,8,403,47,209,673,452,109,0,0,0,0,0,0,0,0

Making Range / Magic Mobs to Non Aggro, follow this:
1.) I'll be using Lasputin Hunter as an example here. Press 'alt + g' then type this D208080. Or you can press 'ctrl + f' then type 1704,Lasputin Hunter,0. It will point you to the same direction.


2.) So let's swap the two values here, green (since it has 5 values, choose the zero '0' value) and blue.

1704,Lasputin Hunter,0,26,61,16539,0,336,480,15,70,1,6,0,0,0,0,0 ,35,5,0,0,0,2,4.5,1,1,rasputinhunter,ÀÛ¼ºÁß,1536,251,339,3150 0,3,1,3,140,105,117,117,2,18,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 5,438,626,25,59,14,3100,3000001,207,0,60,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,460,10,0,0,24,4 02,25,335,26,201,0,0,110,357,111,298,112,179,502,8 ,404,45,210,642,451,105,0,0,0,0,0,0,0,0

green = elemental resistance values
blue = cell range for range/magic mobs

3.) After we swap, it should look like this.

1704,Lasputin Hunter,0,26,61,16539,0,336,480,15,70,1,6,0,0,0,0,0 ,35,5,14,0,0,2,4.5,1,1,rasputinhunter,ÀÛ¼ºÁß,1536,251,339,3150 0,3,1,3,140,105,117,117,2,18,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 5,438,626,25,59,0,3100,3000001,207,0,60,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,460,10,0,0,24,4 02,25,335,26,201,0,0,110,357,111,298,112,179,502,8 ,404,45,210,642,451,105,0,0,0,0,0,0,0,0

Done with the Non Aggro part, so let's proceed to the Vac hack.

To make Vac hacks, follow this:
1.) Press 'alt + g' then type this D1C1F80. Or you can press 'ctrl + f' then type 1701,6,8,20. It will point you to the same direction.


2.) Then lets change the values here. Note: for 1000 you can change it to 100 or 500 and for 2 you can change it to 20 or 99

1701,6,8,20,6,2000,2000,1200,1000,0,0,0,50,2,0,4,2,0,0,0,0,0,0,10,5,2,2,12,5,2,0,0,0,0,0,0,0,0,0,0,1

3.) After changing, it would look like this.

1701,6,8,20,6,2000,2000,1200,100,0,0,0,50,2,0,4,20,0,0,0,0,0,0,10,5,2,2,12,5,2,0,0,0,0,0,0,0,0,0,0,1

4.) Press 'alt + g' then type this D1C20C0. Or you can press 'ctrl + f' then type 1704,6,8,20. It will point you to the same direction.


5.) Then lets change the values here. Note: for 1000 you can change it to 100 or 500 and for 2 you can change it to 20 or 99

1704,6,8,20,6,2000,2000,1200,1000,0,0,0,50,2,0,4,2,0,0,0,0,0,0,10,0,2,2,12,5,2,0,0,0,0,0,0,0,0,0,0,1

6.) After changing, it would look like this.

1704,6,8,20,6,2000,2000,1200,100,0,0,0,50,2,0,4,20,0,0,0,0,0,0,10,0,2,2,12,5,2,0,0,0,0,0,0,0,0,0,0,1

After following the steps, save the pack.d04
I copied the launcher bypass from 2moons and still works fine.

This is how to do it:
1.) Go to bin folder of dekaron sea. And right click on 'dekaron_nsse' and choose 'Send To' and then click 'Desktop'.
2.) Now you have the shortcut. Right click on it and choose 'Properties'. Then click on 'Shortcut' Tab and you will see the target. Let's add this to the last of that line ' m_cher'. It should look like this.


3.) Use that launcher everytime you use your hacks. And btw, you keep on having the '500, 301' error thingy after you choose the shard (Polaris, Osterra, Eclipse), just try and try and try to choose the shard and click on 'Connect' and you might get lucky.

Hope this helps

[knightned]

what about for mobs with ai of different numbers and stuff.

[{^_^}]

what is the name of the mob that you are referring to? so that we can all check it out.

[knightned]

1303,Insectivore,0,19,48,10571,0,252,360,10,50,2,6 ,0,0,0,0,0,0,5,0,0,0,0.8,3.6,1,1,insectboa,ÀÛ¼ºÁß, 664,174,235,35000,5,1,2,120,90,103,103,2,18,7,542, 678,20,47,3,2202,1000101,

do i just change the 5 to a 3 and the 2 to a 1?

[{^_^}]

according to the original posts made by names that I've mentioned on top, you only need to swap/switch the 5 and 2. So it would look like this:

1303,Insectivore,0,19,48,10571,0,252,360,10,50,2,6 ,0,0,0,0,0,0,5,0,0,0,0.8,3.6,1,1,insectboa,ÀÛ¼ºÁß, 664,174,235,35000,2,1,5,120,90,103,103,2,18,7,542,678,20,47,3,2202,100010 1,0,0,0,0,0,0,0,0,0,0,20,47,0,0,0,0,0,0,0,0,0,0,0, 0,0,20,47,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,18,226,19,451,20,376,0,0,108,201,109,401,110,334 ,502,4,402,51,207,721,450,117,0,0,0,0,0,0,0,0

[knightned]

but then the mob will still hit me as soon as i hit it right...?

[kaedeneko]

how will i know that the vachack works? all the monster will come to me?

[tawafimu]

if you want to do vac hack ai number must be 6 or 3 (for most mobs) and if you want non agro ai must be 7

[kaedeneko]

i didnt get what you just said... where will i put those numbers?

[tawafimu]

red number=ai so this number should be 3/6 or 7

[leepro]

(Winhex Version 15.1 ) where we can download Winhex Version 15.1?
tell me please!

[Hagman94]

Originally Posted by leepro

(Winhex Version 15.1 ) where we can download Winhex Version 15.1?
tell me please!

Click to download Winhex 15.1

Remember to click Thanks

[chronosavant]

dude, you finally got it lol

wasn't about to release anything but lol grats

[getsuga05]

where do i actually register? can you give me the exact website that you downloaded your winhex and registered plz ^^

[tawafimu]

Originally Posted by getsuga05

where do i actually register? can you give me the exact website that you downloaded your winhex and registered plz ^^

man your computer won't bite you, you can try find on your own, to download winhex use google and write "winhex 15.1+download" then chose website and download, to register run program hit help and hit register