This is a guide to help you convert your CE script to ollydbg, so you will be able to save your file and not paste the codes every time, note this is only for the exe not the Dll so you will still need to paste the codes to conquer.exe to stop the slowdown
For the guide you will need:
SV 1.17 exe codes
CheatEngine
Ollydbg, any version should do but I recommend 1.10
A somewhat functional brain, if you don't know how to use a computer properly, go back to conquer and don't waste space in this thread, I will only help with relevant posts.
Nice another good job produced by you, i'll have a look later.
Antivir 7.4.0.37 6.39.0.81 Nothing found
ArcaVir 1.0.4 2006.01.27 Nothing found
Avast 1.0.7 0753-0 Nothing found
AVG 7.5.47 269.9.14/883 Nothing found
BitDefender 7.60825 7.60825 Nothing found
ClamAV 43 3574 Nothing found
F-Prot 4.6.6 3.16.14 Nothing found
Norman 5.70.01 5.70.01 Nothing found
Rising 17.00.00.36 19.25.00.00 Nothing found
VirusBlokAda32 3.12.0.2 2007.07.01 Nothing found
VirusBuster 4.3.23:9 (2007-02-16) 9.86.8/11.0
Nothing found
Great Job M 1 question can't this same method also be done to the exe so that other code doesn't have to be injected into conquer.exe as well everytime??
Then Sv could be 100% stand alone again
i will try it anyway while i await your reply lol
Edit: M everytime i drag SV into Olly i get this error ; /
Code:
---------------------------
Error
---------------------------
Unable to write back modified registers
---------------------------
OK
---------------------------
can't this same method also be done to the exe so that other code doesn't have to be injected into conquer.exe as well everytime??
Exactly what popped in my head!
The error must be something with your olly i guess since i didnt get it =P
lol i love this thing already, iopen scriptvessal.exe open my lil trainer and done ^_^ i love it!
The error must be something with your olly i guess since i didnt get it =P
lol i love this thing already, iopen scriptvessal.exe open my lil trainer and done ^_^ i love it!
i downloaded same one M used 1.10 final : /
I'll try one of the older ones i guess...If i can get one to load without errors i'm positive i can make it stand alone again...Just a tad more difficult doin it with different adresses for 1.20 heh.
EDIT : Hmm even 1.08b does it too wtf grrrrrrr.
Edit2 : got it !! lol stand alone SV 1.20 It was my anti killin Olly i shoulda known that lol oh well all working now thx again M for push in right direction
Great Job M 1 question can't this same method also be done to the exe so that other code doesn't have to be injected into conquer.exe as well everytime??
Well yes its possible, I did try, but there seems to be some sort of protection/check on the DLL, when you change anything in the DLL it picks up on it and when you press F11, it just gives you the invalid client / reinstall message as if you were using an outdated conquer.exe
IMPORTANT!
Do not trust sv to dc u on low dura it dced for my warrior but didnt dc for my watter
lost sock boots w/srg and sock +3 unq tao arm w/rrg
just lettin yous no so no one eles has my bad luck
It will work sometimes and sometimes Not dont fully trust it to dc on low dura.
ps..
has anyone payed for sv does the newer version work better and dc on low dura etc
thanks in advance
peace
Well yes its possible, I did try, but there seems to be some sort of protection/check on the DLL, when you change anything in the DLL it picks up on it and when you press F11, it just gives you the invalid client / reinstall message as if you were using an outdated conquer.exe
Alright im pretty new to this stuff but that protection cant u like bypass it by making like i dunno a jmp in the exe to the dll then run thru it all jmp back and execute the code u wanna input (dont flame me for being new with this just tryin to think, and correct me in anyway possible :P)
or perhaps just delete the whole message about invalid client XD
I like to think that everything is possible
IMPORTANT!
Do not trust sv to dc u on low dura it dced for my warrior but didnt dc for my watter
lost sock boots w/srg and sock +3 unq tao arm w/rrg
just lettin yous no so no one eles has my bad luck
It will work sometimes and sometimes Not dont fully trust it to dc on low dura.
ps..
has anyone payed for sv does the newer version work better and dc on low dura etc
thanks in advance
peace
Correct me if im wrong but this has nothing to do with the d/c on low dura thats the second code not the first, this tutorial is just great for not having to inject the first code anymore
IMPORTANT!
Do not trust sv to dc u on low dura it dced for my warrior but didnt dc for my watter
lost sock boots w/srg and sock +3 unq tao arm w/rrg
just lettin yous no so no one eles has my bad luck
It will work sometimes and sometimes Not dont fully trust it to dc on low dura.
ps..
has anyone payed for sv does the newer version work better and dc on low dura etc
thanks in advance
peace
LOL sounds to me like someone followed someones guide on a cracked SV and forgot the codes have to be injected into EACH client ya have running...That is why 1 dc'd and another didn't...Of course none of this really applies to this thread lol.
hey, i did it all but don't work also when i need to press ctrl+g it don't work but i found that search tool annyway. but when i look for the code: 4240EC.(from the code needed in cheat engine) i don't find JMP 01180000 but JMP 00E30000 the rest is all the same but when i'm done and saved it all and start SV it gets an error.. i am sure i have sv 1.17 so what you think is the problem?
hey, i did it all but don't work also when i need to press ctrl+g it don't work but i found that search tool annyway. but when i look for the code: 4240EC.(from the code needed in cheat engine) i don't find JMP 01180000 but JMP 00E30000 the rest is all the same but when i'm done and saved it all and start SV it gets an error.. i am sure i have sv 1.17 so what you think is the problem?
The jmp is different everytime ya inject SV it only shows 01180000 in M's video if ya notice everytime ya close sv and reinject it the address changes.
for example 1 time mine will show A9110000 and maybe the next time i run it the jmp is something else
The adress shown at 4240EC no matter what it is,is where ya start the process of the video...That is where ya set your breakpoint and follow the rest...The addresses for all the changes were different in mine because i was working with 1.20 but all the functions don't change just adresses...So the video is still sound ya just have to use your noodle and substitute some addresses for another.
Alright im pretty new to this stuff but that protection cant u like bypass it by making like i dunno a jmp in the exe to the dll then run thru it all jmp back and execute the code u wanna input (dont flame me for being new with this just tryin to think, and correct me in anyway possible :P)
or perhaps just delete the whole message about invalid client XD
I like to think that everything is possible
Not in the way you described it but yes its definitely possible to bypass the check.
Script kiddies ASM and olly tut.... 11/10/2010 - Mabinogi - 8 Replies First things first... I am not the original author of this tutorial but I found it very helpful while I was learning and there are also some more in-depth tutorials on olly and asm found here
Basic Assembly/OllyDBG Tutorial, in relation to Game Cheats
A tutorial I wrote originally for another board, I figured I'd post it here. If there's a beginner board relating to R.E. that this would be better suited in, that'd be great if a mod could move it (After all, this guide is anything but...
Need a little help with Olly 12/08/2009 - Mabinogi - 16 Replies Why are the addresses in my IDA different from the ones in my Olly?
Same DLL, but I cant find the adress NOR the unicode in my Olly that I see in front of my in my IDA.
Any suggestions?
Edit: Using IDA 64 bit and normal OllyDbg
SnD Olly 07/29/2009 - General Coding - 13 Replies While searching for a way to unpack Themida, i stumbled across a great suite of tools gathered around a modified version of the famous OllyDbg, assembled by the group "Seek n' Destroy".
The package is about 78Mb huge and features alot of plugins for olly and other tools you could need for your general reverse engineering needs.
This package is still in beta and has some downsides, which are for example:
1) lots of stuff in olly is now in leetspeak...
screenshot:...
Olly DGB to run 01/26/2009 - World of Warcraft - 2 Replies Hey, quick question, I was talking with one of my old buddies recently and we hada discussion about how we could get olly debugger or something of the likes to run alongside with WoW. Or any other dbg program. Thanks!
olly convert your CE script to ollydbg repair fuction that anantasia fixed 11/05/2007 - Conquer Online 2 - 4 Replies was wondering f u could do the olly convert your CE script just like what u did on sv 1.17 this is the code anantasia made hope u can help me really appriciate it :P
//code from here to '' will be used to enable the cheat
alloc(newmem,2048) //2kb should be enough
label(returnhere)
label(exit)
label(check1)
label(check2)
