SV Manual

[Clyps]

EDIT: Request Close
Retired, I wont be updating the manual



Ive seen alot of questions about SV most of em are explained
but i decided to request a manual from the creator of SV anyway. So here it is,
the original manual, it contains all the info you need, yea even the autogamble part is explained.

April 28 2007 - Received updated manual, replaced the old with the new, download below



Creds to Zhou Shiku

[Clyps]

For the skeptics

Complete scanning result of "SV_Manual.rar", received in VirusTotal at 01.09.2007, 17:26:12 (CET).

Antivirus Version Update Result
AntiVir 7.3.0.21 01.09.2007 no virus found
Authentium 4.93.8 12.30.2006 no virus found
Avast 4.7.892.0 12.30.2006 no virus found
AVG 386 01.09.2007 no virus found
BitDefender 7.2 01.09.2007 no virus found
CAT-QuickHeal 9.00 01.09.2007 no virus found
ClamAV devel-20060426 01.09.2007 no virus found
DrWeb 4.33 01.09.2007 no virus found
eSafe 7.0.14.0 01.09.2007 no virus found
eTrust-InoculateIT 23.73.109 01.09.2007 no virus found
eTrust-Vet 30.3.3313 01.09.2007 no virus found
Ewido 4.0 01.09.2007 no virus found
Fortinet 2.82.0.0 01.09.2007 no virus found
F-Prot 3.16f 01.09.2007 no virus found
F-Prot4 4.2.1.29 01.09.2007 no virus found
Ikarus T3.1.0.27 01.09.2007 no virus found
Kaspersky 4.0.2.24 01.09.2007 no virus found
McAfee 4934 01.08.2007 no virus found
Microsoft 1.1904 01.09.2007 no virus found
NOD32v2 1966 01.09.2007 no virus found
Norman 5.80.02 12.31.2007 no virus found
Panda 9.0.0.4 01.08.2007 no virus found
Prevx1 V2 01.09.2007 no virus found
Sophos 4.13.0 01.05.2007 no virus found
Sunbelt 2.2.907.0 01.05.2007 no virus found
TheHacker 6.0.3.146 01.08.2007 no virus found
UNA 1.83 01.06.2007 no virus found
VBA32 3.11.2 01.09.2007 no virus found
VirusBuster 4.3.19:9 01.09.2007 no virus found

Aditional Information
File size: 393224 bytes
MD5: 43852ae57eb0eff641a99a4b8f6d6718
SHA1: 8fb0c23edc461d3eabc855170683d241592a5012

EDIT: And jotti

File: SV_Manual.rar
Status:
OK(Note: this file has been scanned before. Therefore, this file's scan results will not be stored in the database)
MD5 43852ae57eb0eff641a99a4b8f6d6718
Packers detected:
Analyzing...
Scanner results
Scan taken on 09 Jan 2007 16:28:49 (GMT)
AntiVir
Found nothing
ArcaVir
Found nothing
Avast
Found nothing
AVG Antivirus
Found nothing
BitDefender
Found nothing
ClamAV
Found nothing
Dr.Web
Found nothing
F-Prot Antivirus
Found nothing
F-Secure Anti-Virus
Found nothing
Fortinet
Found nothing
Kaspersky Anti-Virus
Found nothing
NOD32
Found nothing
Norman Virus Control
Found nothing
VirusBuster
Found nothing
VBA32
Found nothing

[leane2000]

Nice work

[cyberside0]

Thanx i need this!

[nevermind4o4]

yea it's rl clean file

STATUS: FINISHED
Complete scanning result of "SV_Manual.rar", received in VirusTotal at 01.09.2007, 22:15:10 (CET).

Antivirus Version Update Result
AntiVir 7.3.0.21 01.09.2007 no virus found
Authentium 4.93.8 01.09.2007 no virus found
Avast 4.7.892.0 12.30.2006 no virus found
AVG 386 01.09.2007 no virus found
BitDefender 7.2 01.09.2007 no virus found
CAT-QuickHeal 9.00 01.09.2007 no virus found
ClamAV devel-20060426 01.09.2007 no virus found
DrWeb 4.33 01.09.2007 no virus found
eSafe 7.0.14.0 01.09.2007 no virus found
eTrust-InoculateIT 23.73.109 01.09.2007 no virus found
eTrust-Vet 30.3.3313 01.09.2007 no virus found
Ewido 4.0 01.09.2007 no virus found
Fortinet 2.82.0.0 01.09.2007 no virus found
F-Prot 3.16f 01.09.2007 no virus found
F-Prot4 4.2.1.29 01.09.2007 no virus found
Ikarus T3.1.0.27 01.09.2007 no virus found
Kaspersky 4.0.2.24 01.09.2007 no virus found
McAfee 4935 01.09.2007 no virus found
Microsoft 1.1904 01.09.2007 no virus found
NOD32v2 1968 01.09.2007 no virus found
Norman 5.80.02 12.31.2007 no virus found
Panda 9.0.0.4 01.09.2007 no virus found
Prevx1 V2 01.09.2007 no virus found
Sophos 4.13.0 01.05.2007 no virus found
Sunbelt 2.2.907.0 01.05.2007 no virus found
TheHacker 6.0.3.146 01.08.2007 no virus found
UNA 1.83 01.09.2007 no virus found
VBA32 3.11.2 01.09.2007 no virus found
VirusBuster 4.3.19:9 01.09.2007 no virus found


Aditional Information
File size: 393224 bytes
MD5: 43852ae57eb0eff641a99a4b8f6d6718
SHA1: 8fb0c23edc461d3eabc855170683d241592a5012

[Botter2daMax]

I posted it here (link below) earlier so that he could update his guide but he hasnt. I guess i should have started a new thread. GJ Man.

[TT_TT]

Originally posted by cyberside0@Jan 9 2007, 22:03
Thanx i need this!

Are you sure DM and mr.rattlz sended you the file

[Clyps]

Alot of downloads, poor karma and posts lol cmon guys feel free to ask anything

[Clyps]

Originally posted by Botter2daMax@Jan 9 2007, 23:14
I posted it here (link below) earlier so that he could update his guide but he hasnt. I guess i should have started a new thread. GJ Man.

Yea you shouldve, I guess I beat you to it eh?
Anyway its mainly for noobs with questions about SV, and I see you got exactly the same file as me lol did you mail the guy as well? =p

[BlitzE]

Well I do everything my friend tells me, but when I go to the game, I click F11 and nothing opens, no window or interface. Would really appreciate some help with this.

[Zangetsu]

wish this solved my question why it only picks up items when it wants to -.-

[djtiesto]

ScriptVessel Manual

************************************************** * CAUTION **********************************************
1# Using ScriptVessel May give your character a free trip to Bot Jail by GMs or new update.
2# Using ScriptVessel May lost your PERFECT WEAPON, If you get pkd or other reasons.
************************************************** ************************************************** **********
Start the program:
1. Start the game and login your character.
2. Start the platform(ScriptVessel.exe)
3. Fill in the Account and Password (SV account) we provide then press start button.
4. Active the game window, move the character and press * or F11 to start the bot setting interface.
5. Setting the feature and start bot.

Stop the program:
1. Active the game window, move the character and Press * or F11 to stop the bot.
2. Click the "Exit" botton to exit the platform(ScriptVessel.exe).
************************************************** ************************************************** **********
Record Route:
1. After pressing the "START" button to start bot, the Scriptvessel interface will hide and SV will begin to perform it tasks.
2. If the character moves, press F5 to start route recording, walk through the route that you want the bot to move on for once, then press F5 again to complete the recording.
************************************************** ************************************************** **********

Setting Manual

ONE# "F"-Keys Reminder
F1 HP pots
F2 MP pots/Arrows
F3 HP boxes
F4 MP boxes
F8 Sit
F9 Meditation
F10 XP skill

TWO# Interface Setting
There are 8 functions for setting on the interface:
1. Level Up
2. PLvL(PK) - the function is not completed, be careful to use it
3. Off Screen mining
4. Prompt the person or monster
5. Follow Team Leader
6. Level up manually and Prompt refined weapon
7. Timed Clicking
8. Automatic Gambling
1# Level Up / PLvL(PK) Setting
(1) Function = Choose Level Up or PLvL(PK)
(2) Characters = Choose your class (job) of character
(3) Attack Key = Choose weather you want your character to right or left click
Click every(In seconds): Default is 1 second, But some slow skill such as Taoist's Fire Circle must modify the setting.
(4) Movement = Choose weather you want your character to Jump or Run (If you set to pick all items, Pls choose RUN)
(5) No KS / KS = Choose weather you want your character to Kill Steal (KS) or not (If you choose no KS you character will run away if it sees monsters that you have not set to attack and or players, also if your reborn and have your guard out and have it to No KS, your character will run from your guard)
(6) Monster-name = This is where you input what monsters/people you want to attack
Scan for names = If there are monsters/players in your area, this button will add them to your Monster-name area
Save name = This will save your Monster-name list for later
Read name = This will load your Monster-name list you saved earlier
(7) Attack Point = Choose to attack normal monsters or flying monsters.
Adjust Attack-Point higher: If you find your character is very near by monster which you are attacking, you can adjust from 10 to 100 in it.
(8) Pick Items
-Choose DEFAULT to pickup gold/mets/db's/supers/elietes/refined and A, B
"A->" Reminder:
Here is where you can add specific items for your character to pickup, replace 'None' with the item you want it to pick up
"B->" Reminder:
Here you may enter a number from 0 to 10 for certain types of items to pick up, these are the numbers and what there for:
0 = None
1 = Earring
2 = Necky
3 = Ring, Boot, Bracelet
4 = Club
5 = Do not pickup Ref item
6 = Previous 5 options
7 = Trojan armor and Coronet
8 = Previous 7 options
9 = Do not pickup CERTAIN GLOD
10 =Do not clean inventory
-Choose NONE to ignore all items
-Choose ALL to pick up all items and Auto clean inventory
(9) Use Pots at = Place HP Pots on F1 and manna pots on F2 and here you can set when your character will use HP or Manna pots judged on how much HP/MP you have left
(10) Disconnect = Here you can set if you want your character to disconnect after its HP Drops down to a certain point
(11) Durability = Choose at what durability your equipment can get to before your character will disconnect
(12) Press F2 every = Choose how often (In seconds) SV presses F2
(13) Record Route = after you have set up your bot, choose this option and click start, now press F5 and start moving around as where you want your bot to go. When that is done press F5 again to finish recording.
(14) Area = Choose Area (Basically the radius from your current corrordanates) and Mov (the amount of steps your character will take around the area you have set)
If the character is Taoist and want it sit at one place, Pls set Mov = 0
(15) Record Route
-Choose DEFAULT, the character will walk around the area according to the area 14.
-Choose RECORD ROUTE, you must record route(F5) that you want the character to walk after the bot is started. And the setting of area 14 is invalid.
(16) Disconnect after meeting(names) = Input players names here when you want to disconnect on certain players/monsters (Please add "," after every name)
(17) Auto Reconnect = Will re-connect if you disconnect.

2# Off Screen Mining Setting
Now, the GAME has changed the Mine function, you cannot get a gem in Twin/Pheonix mines normally. It is more useful in DesertCity mine.
To auto Mine you have 2 options (both of which drop ore):
(1) Dont save gem / Twin Jail
You can make SV so one of three things when you find a gem:
-> Prompt - This will give you a message when you find a gem
-> Off-line - This will disconnect you if you find a gem
-> Mine - This will continue mining if you find a gem
If you are Mining in Twin Jail(you must set as Twin Jail), the bot should revive you.
(2) Save gem
Go to it her TwinCity, PheonixCastle or DesertCity mines with a scroll to that same city and pick a spot to mine.
Make sure you choose what city your in from SV so it knows what to do. Click start and this is what it is supposed to do:
-> Mine till it find a gem
-> Scroll to the city your mining in (if you have a scroll)
-> Sell your ore and buy a scroll
-> Deposit your gem in your bank (provided you dont have a bank password)
-> Hop back to the mine you were just in and continue to mine in the same corodinates as before
If you get pkd while mining the bot should revive you and mining again.

3# Special Functions Setting
-> For Prompt the person or monster, SV will allow you to move and level manually and you can input monster/player names into Monster-name area and SV will notify you when that player/monster is in your area
-> For Follow Team Leader, set this if your in a team and SV will follow your team leader for you
Pls input the name of group leader into Monster-name area(the first field)
-> For Level up manually and prompt refined weapon, SV will notify you when that refined/Unique/Elite/Super weapon is found in your area
-> For Timed clicking
A)The key Shift can lock the attactk direction or un-lock it
B)Attack around[Level Up Field]: Pls put the mouse at the root of Wooden stake or the body of Straw man, after the Character cannot move the press key Shift to lock the Coordinates. Then it can play auto.
-> For Automatic Gambling, it is only for fixed bet.
The function is not completed, be careful to use it. Pls input your fixed bet in the three field:
1# 0 for more than 21 times;
2# 216 times, please input 111, 222, 333, 444, 555 or 666;
3# 2 times, Please input big or small;
4# others, Please input the times 4,5,6,7,8,9,10,11,12,13,14,15,16 or 17

THREE# Setting Question

How to Autostig?
If you wish to autostig with SV follow these simple instructions:
1- Set stig to right click in Conquer
2- Click "Level up"
3- Click "Taoist"
4- Choose "Right click"
5- Choose how many seconds between stigs "Click every X Seconds" (X being number of seconds)
6- Choose "KS"
7- In "Monster-name" type the name of player you wish to stig
8- In "Pick Items" choose none
9- Set your heal/dissconect at hp and use mana pot areas to what ever you wish (0 to not disconnect)
10- For "Area" put 1 and for "MOV" put 0 (both are 0 is not accept)

How to work on multiple characters at 1 PC?
1. Start AgentKing.exe and login successfully.
2. Active game window, move one character and press * or F11 to start the bot setting interface.
3. Setting the feature and start bot for this character.
4. For other cheracter, redo 2 & 3.
5. To stop one character's bot, Pls active the game window, move the character and Press * or F11.
6. After you stop all bots, Click the "Exit" botton to exit the platform(ScriptVessel.exe).

FOUR# Error Message
1. If you get the message "the Account is using now", you dont close the ScriptVessel.exe normally. Pls wait 20 minitues and login again.
2. If you get the message "server offline no response or version update", the internet or server have some problem. Pls login again or login later.


Five# Others

How to do the problem of crashing windows explorer?
If someone have problems with crashing windows explorer after start SV, For example explorer crashed when tried to do the following operations: ctrl+c , ctrl+v, write (for example Start->Search->All Files and Folders-> "then when i started typing it crashed"), when swapping between games windows etc.
This is what you have to do:
Start->Run->regedit->ok
Navigate to the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft&#0 92;WindowsNT\CurrentVersion\AeDebug
Name: Auto
Type: REG_DWORD
Value: 0 disable
Value: 1 enable
The default value under Auto is 1. This means the Dr Watson Postmortem Debugger is enabled.
If you put the value under Auto 0, Dr Watson Postmortem Debugger will be disabled and the drwtsn32.exe wont run when the errors occure.
Disabling drwtsn32.exe sure helped your computer from crashing.
If not, you can change the value back to 1.

[Clyps]

Originally posted by Zangetsu@Jan 10 2007, 01:48
wish this solved my question why it only picks up items when it wants to -.-

Try putting "pick all items" on, and put the numbers 1, 2, 3 10, 10 in the fields below, works good for me

[Zangetsu]

lost me xD

[a_perfect_tool]

Wow you guys are great...