Credits go to (omfg2007)
Install one loop-back with the following IP/Subnetz mask 60.169.2.206/255.255.255.0Explanation as text: Quotation:
Proceed as follows, in order to manually install Microsoft the loop backing adapter in Windows XP: 1. Click on start and afterwards on system control.
Go ton start, go ton control panel.
2. If you activated the ?classical opinion?, then click in the left window area on ?to the category opinion change?.
Look for hardware ( add hardware )
3. Select printers and other hardware.
Click it.
4. Click in the left window area on ?see also on hardware?.
Search for hardware, blah blah, already existing.
5. Click on ?, the hardware already one attached?.
The hardware is already existing, click that.
6. Click at the end of the list on ?new hardware add?.
New hardware configuration, is what you want. Something like that. Network adapter.
7. Select ?hardware from a list select manually and install? out.
Install new hardware for network.
8. Select ?network adapters?.
Ok, now you should see Microsoft, etc.. on side.
9. Select in the field ?manufacturers?, ?Microsoft?.
Click MSOFT.
10. Select in the field ?network adapters?, ?Microsoft loop baking adapter?.
Clicky loopback adapter.
11. Place completely.
Install.
12. Go they into the network connections
Now go to network connections.
13. Make they for one right-click on the new ?Microsoft loop baking adapter? and select them ?characteristics?.
It will look like local connection, go to properties, and go to TCP/IP protocal properties.
14. Mark they ?Internet minutes (TCP/IP)? out and click on ?characteristics?
Now there should be IP, Subnet, etc... Make it so you can modify these boxes.
15. Now you set the IP assignment on manual and enter the following IPīs:
Now, fill in acocrdingly.
Quotation:
IP-Adresse : 60.169.2.206
Subnetmaske : 255.255.255.0
Standartgataway : DONT TOUCH
PLUS KARMA IF HELPED