"versuche" ich einen kleinen aber feinen guide zu machen
also fangen wir an
Was brauche ich ?

Ohne das geht garnix ^^

ein torrent prog mit dem ihr die torrent datein öffnen und euch
kro & sak laden könnt.

<- - da könnt ihr euch auch einen data ordner mit sclient laden !

hier 2 seiten wo ihr die neusten eAs downloaden könnt ^^
so weiter im text

WICHTIG ladet das und entpackt es in denn eathena ordner sonst
wird es nicht starten.

is kein muss aber is besser so

PS:die exe sowie data ordner muss in euren RO ordner.
Wie fange ich an ??
Also als erstes entpackt ihr eA ganz egal wohin.
Dann geht in denn eathena ordner und öffnet denn ordner "Conf"
dort drinnen befindet ich der haupt teil damit der server "Online" geht
so fangen wir mal von oben an
Öffnet char_athena.conf mit dem Editor
Char Athena
ich erkläre ich hier was ihr genau machen müsst.
Das war nun char athena ^^Quote:
// Athena Character configuration file.
// Server Communication username and password.
userid: s1
passwd: p1
// Server name, use alternative character such as ASCII 160 for spaces.
// NOTE: You should not use spaces in the server name, or guild emblems won't work client-side!
server_name: Hier kommt der server Name Hin
// Wisp name for server: used to send wisp from server to players (between 4 to 23 characters)
wisp_server_name:
// Login Server IP
// The character server connects to the login server using this IP address.
// NOTE: This is useful when you are running behind a firewall or are on
// a machine with multiple interfaces.
//login_ip: 127.0.0.1
// The character server listens on the interface with this IP address.
// NOTE: This allows you to run multiple servers on multiple interfaces
// while using the same ports for each server.
//bind_ip: 127.0.0.1
// Login Server Port
login_port: 6900
login_ip:Vorsicht dies muss Extra hinzugefügt werden !Hier kommt eure Lan IP hin
// Character Server IP
// The character server exports this IP address to the entire world.
// NOTE: You should only need to set this if you are running behind a
// firewall or are on a machine with multiple interfaces.
//char_ip:127.0.0.1
char_ip:Vorsicht dies muss Extra hinzugefügt werden !Hier kommt eure WAN IP hin
// Character Server Port
char_port: 6121
so öffnet nun map_athena.conf
Map Athena
hier wieder ein ausschnitt von wichtigsten,
das war map athena ^^Quote:
//--------------------------------------------------------------
// Configuration Info
//--------------------------------------------------------------
// Interserver communication passwords, set in account.txt (or equiv.)
userid: s1
passwd: p1
// Character Server IP
// The map server connects to the character server using this IP address.
// NOTE: This is useful when you are running behind a firewall or are on
// a machine with multiple interfaces.
//char_ip:127.0.0.1
// The map server listens on the interface with this IP address.
// NOTE: This allows you to run multiple servers on multiple interfaces
// while using the same ports for each server.
//bind_ip: 127.0.0.1
// Character Server Port
char_port: 6121
char_ip:Vorsicht dies muss Extra hinzugefügt werden !Hier kommt eure Lan IP hin
// Map Server IP
// The map server exports this IP address to the entire world.
// NOTE: You should only need to set this if you are running behind a
// firewall or are on a machine with multiple interfaces.
//map_ip: 127.0.0.1
// Map Server Port
map_port: 5121
map_ip:Vorsicht dies muss Extra hinzugefügt werden !Hier kommt eure WAN IP hin
weiter mit subnet_athena(sry hier bin ich mir nichmehr so sicher...)
Subnet Athena
hier der ausschnit
hier müsst ihr entweder das dahin schreibenQuote:
// Subnet support file
// Format is:
// subnet: net-submask:char_ip:map_ip
// you can add more than one subnet
//subnet: 255.0.0.0:127.0.0.1:127.0.0.1
//subnet: 255.0.0.0:LAN IP:LAN IP
oder das
//subnet: 255.255.255.0:WAN IP:WAN IP
sry das ich nichso sicher mehr weiß...
wieder ein schritt weiter ^^
nu ein wichtiger schritt
Öffnett GRF-Files
und ausschnitt wieder
so sieht das momentan ausQuote:
//-----------------------------------------
// GRF List
//-----------------------------------------
grf: C:\Program Files\Gravity\RO\data.grf
grf: C:\Program Files\Gravity\RO\sdata.grf
// You may add more in this format
// grf: <data file path>
//------ Others ---------------------------
//Path to directory that contains the data dir
//NOTE: Path must include trailing backslash, only one data_dir entry is supported.
//data_dir: C:\Program Files\Gravity\RO\
da bei denn meisten ro in C:\Programme\gravity\ro insterlliert ist müsstet ihr das zb so ändern
wenn ihr ro aufQuote:
//-----------------------------------------
// GRF List
//-----------------------------------------
grf: C:\Programme\gravity\ro\data.g rf
grf: C:\Programme\gravity\ro\sdata. grf
// You may add more in this format
// grf: <data file path>
//------ Others ---------------------------
//Path to directory that contains the data dir
//NOTE: Path must include trailing backslash, only one data_dir entry is supported.
//data_dir: C:\Programme\gravity\ro
C:\Programme Files\gravity\ro
insterlliert habt könnt ihr denn schritt aulassen.
nun drückt ihr auf runserver und es sollte an gehen ^^
nu noch der letzte schritt ^^
Sclient Info
ich zeig euch eine sclient info und schreibe so gut es geht die bedeutung dranne(zumindest von demm wichtigsten ^^]
*= eine kleine naricht wenn man mit dem mouse cursor über denn server namen gehtQuote:
<?xml version='1.0' encoding='euc-kr' ?>
<clientinfo>
<servicetype>korea</servicetype>
<servertype>sakray</servertype>
<connection>
<display>Euer server name Hierhin</display>
<desc>*</desc>
<address>**</address>
<port>6900</port>
<version>19</version>
<langtype>8</langtype>
<aid>
<Admin>2000002</Admin>
</aid>
</connection>
</clientinfo>
**=Wichtig wenn ihr darauf connecten wollt muss da eure "Lan" IP hin wenn ihr wollt das andere darau connecten dann muss da eure "wan" IP hin
der account mit der ID 2000002 hat GM sprites!
ich werde nun nochn paar andere wichtige sachn schreiben
Wie mache ich einen Account auf meinem server ?
startet nun eure EXE und es erscheint das ro fenster.
dort seht ihr dann ID und direkt darunter PW bei ID schreibt ihr hin
ID:meinaccount_M (<-- für einen männlichen account)
oder
ID:meinaccount_F(<--Für weiblichen account)
ihr könnt natülich eure eigene ID nehmen und ID: nicht mit hinschreiben
und ein passwort
PW:******(<-- da natürlich ohne _M _F oder so)
beim Nächsten einloggen _F _M
weglassen.
Wie mache ich mich zum GM?
Als erstes macht ihr einen account
auf eurem server Dann schliest ihr euer RO fenster und geht
in denn eAthena ordner und sucht denn ordner "save" dort öffnet ihr
account.txt
dor sollte das stehen
2000002 EURE ID EURES PW 2006-10-03 16:53:18 M 6 0

2000002 ist eure Account ID die ihr euch merken müsst
so nun könnt ihr account.txt wieder schliesen nun geht es wieder in
denn eAthena Ordner von dort aus wieder in denn conf ordner
und dort öffnet ihr GM_account.txt
so müsste es aussehen
so muss es aussehen wenn ihr euren GM_account eintragen tutQuote:
// eAthena's GM Accounts File
// Edited by MC Cameri to enable account id ranges
// Changing this file while login server is running
// Usage #1(Standard): <account id> <level>
// Usage #2(Range): <beginning of range[-:~]end of range> <level>
// Examples:
// 2000002 99
// 2000003-2000005 99
// 2000003~2000005 99
// 704585 30
704554-704584 99
eure ACCOUNT ID die ihr euch merken solltetQuote:
// eAthena's GM Accounts File
// Edited by MC Cameri to enable account id ranges
// Changing this file while login server is running
// Usage #1(Standard): <account id> <level>
// Usage #2(Range): <beginning of range[-:~]end of range> <level>
// Examples:
// 2000002 99
// 2000003-2000005 99
// 2000003~2000005 99
// 704585 30
704554-704584 99
2000002 99
das GM level das ihr euch oder denn anderen usern geben wollt
ich hoffe es geht so hab mich irgend wie ein wenig selber verwirrd und dies is übrigens mein erster guide... wenn was fehlt postet es ^^