[SmurfIT!] 3in1

[Pieman27]

about the mgdef its been that way for a long time now and on all versions. it was the developers fault and won't be fixed till enough reports come.

[chaosbeta]

Originally Posted by Smurfin

I haven't tried MHS Retriever yet because PW Indo hasn't changed base address/offsets since the retriever was released. So I couldn't offer much help, try asking in MHS Retriever thread also, maybe someone will help.



Later if you got your MHS settings, just compare and calculate the offsets with offsets in smurfIt.ini file, you'll get all the offsets you need by doing a little math.

Okay, I will give that a try


Yeah, I've compared the offsets from "Custom_OffSets" file and replaced them in your "SmurfIT" file but it didn't seem to work, I think since all the other values are still the default Indo PW or does the other offsets matter or do they only affect fly, multijump, etc. (by the way I my unlimited jump, fly don't work either due to the incorrect offsets.) Any suggestions? Thanks

[Smurfin]

actually one pack of complete working offsets from one PW region is all you need to determine all the other offsets you want.

by using custom_offsets.ini from MHS (as long as this custom ini works for the version of PW you're currently playing) you can start comparing and calculating for the rest of the offsets.

Indo PW offsets used in SmurfIT.ini :
Fly Offset=1592
Jump Offset=2836
Zoom Offset=2054
Target Offset=2596
HP Offset=1104
MaxHP Offset=1152
MP Offset=1108
MaxMP Offset=1156

begins with target offset from custom ini. For example target offset=2500
find the value modifier by calculating 2500-2596=(-96). We have -96 as the modifier.

the rest is as follow :
Fly Offset=1592 => 1592-96=...
Jump Offset=2836=>2836-96=...
Zoom Offset=2054=>2054-96=1958
Target Offset=2596=>2596-96=2500 this is the one we got from custom offsets.ini (just for example)

or another way :
pw indo : 2596(target offset) - 2054 (Zoom offset) = 542
pw _x_ : 2500(target offset) - ...... =542 , we got 1958 for zoom offset (same as above)

calculate the rest of the offsets any way you like and you'll get your own PW offsets.

as for hp mp maxhp maxmp, I think they're kinda differently located in memory and you can't calculate them with modifier from target offset, but you have each offset from your custom_offsets.ini, so start calculating again by using similar method as described above and you'll have your own offsets in no time ^_^

and don't forget to change the base address as well.

[chaosbeta]

Wow, Thanks a lot smurfin! It works now. Yay! But I still got a couple of questions.

I was wondering I've set my priest to Inurse then Ifollow and also Ibuff and then Ifollow, is this suppose to be automatic where you set a timer or reach a certain % of hp then at that time your priest will automatically heal? Cause so far I am using rapidkey send where i insert the number for healing in my alt + X and also buffing in alt+X but there r only f 1 -5 but I have more than 5 buffs... So I was wondering if this program is suppose to automatically buff you when you set a timer... if so I would want to know how to get it working because so far its not. Same question about like if my char's hp reaches a certain per cent, if it automatically heals..

actually I just read over the smurfIT.ini, and I am sure you are able to set a timer or a % of hp, but I don't know what to change in there :/ I also ticked Inurse/Ifollow,Ibuff/Ifollow but he doesn't follow unless i use my rapidkey but when I use it, it just spams heal even when my guy is at 100% hp..

[Smurfin]

glad you can finally make it working with the offsets ^^. Now about using the app itself :

for iNurse, yes it works that way, auto heal will be triggered by hp percentage of your chars, and iBuff will automatically buff your chars every x minutes, but for first buff you have to do it manually and for the next every x minutes EP will autobuff any char you want to get buffed

for rapidkeysend, I would not recommend it for buffing, you have EP remote control hotkeys for that, I set buffing command as alt-b and you're supposed to use ingame combo macro for binding all EP buffs into one ingame skill key.

but before you can use any of that, you must do your end by inputting settings needed for the app to work as expected.

first you have to input your own EP window name in smurfit.ini, then on section [char ID], put each char's char ID to the corresponding slot with the right window names. This char id section is needed for iNurse and iBuff features of the app.

for remoting EP you have to set it from smurfit's interface, like this :
-use [alt-w] to cmd char in wintitle : [ input your EP window name here] and save
to follow another char with this ID : [ input the char's ID] and save

now on how to get your target's id, but before getting into that, you should know that you can switch window name slot to activate hacks by pressing ctrl-1,2,... to ctrl-5. Watch the Application title of SmurfIT changes when you press ctrl-1 to 5. That shows on which window the hack is activated to. To get your char id, activate hack to the char's windowname then click your char's photo at top left part of the screen with hp mp exp fury bars, your char will target itself, now check on smurfit's interface's [target id viewer] , that is your char ID. Repeat if you want to get your other char's char id.


just for example, this is my own settings (Zelda is my EP) :

[Settings]
Window Name1=Element Client
Window Name2=Smurfin
Window Name3=Zelda
Window Name4=Link
Window Name5=Wolfstein
AutoWinActivateIfSwitched=ON
Base Address=9607148
Fly Hotkey={F10}
Jump Hotkey={F11}
CommandFollow_to_this_window=Zelda
Char ID to be Followed=0013daf0
BuffKey={F5}
HealKey=6
RegenKey=5
HealAreaKey=1
DispelKey={F4}

[CharID]
Window Name1 Char ID=
Window Name2 Char ID=0013DAF0
Window Name3 Char ID=0018AEB0
Window Name4 Char ID=0018AE50
Window Name5 Char ID=0012FB50

[Offsets]
Fly Offset=1592
Jump Offset=2836
Zoom Offset=2054
Target Offset=2596
HP Offset=1104
MaxHP Offset=1152
MP Offset=1108
MaxMP Offset=1156

[RapidKeySend]
Key1=65
Delay1=1000
sendkey1_to_this_window=Zelda
Key2=34
Delay2=1000
sendkey2_to_this_window=Smurfin
Key3=1
Delay3=1
sendkey3_to_this_window=Zelda
Key4=2
Delay4=1
sendkey4_to_this_window=Zelda
Key5=6
Delay5=1
sendkey5_to_this_window=Zelda

[iNurse]
EP Window Name=Zelda
HP Perc Tolerance=80
iNurse HealKey=6
BuffTimer=12

[GuiConfig EPRC]
iNurseWin1=0
iNurseWin2=1
iNurseWin3=1
iNurseWin4=1
iNurseWin5=1
iBuffwin1=0
iBuffwin2=1
iBuffwin3=1
iBuffwin4=1
iBuffwin5=1
iBuffDelay_InMinutes=15
iBuffKey={F5}

[GuiConfig iPot]
iPotHP Key={F2}
iPotMP Key={F1}
iPotHP Tolerance=48
iPotMP Tolerance=35
iPotHP1=0
iPotHP2=1
iPotHP3=1
iPotHP4=1
iPotHP5=1
iPotMP1=0
iPotMP2=1
iPotMP3=1
iPotMP4=1
iPotMP5=1

[chaosbeta]

thanks for the quick reply as usual, i've gotten the settings down and all but still doesnt seem to work/follow/buff/heal, and also by the way, is the hack suppose to have it on my ep or my warbeast? like:
smurtit (healer) My ep or smurfit (Tanker) My warbeast.

here is my smurfit.ini

[Settings]
Window Name1=Element Client
Window Name2=Tanker
Window Name3=Healer
Window Name4=Element Client4
Window Name5=Element Client5
AutoWinActivateIfSwitched=ON
Base Address=9451524
Fly Hotkey={F10}
Jump Hotkey={F11}
CommandFollow_to_this_window=Healer
Char ID to be Followed=00022A41
BuffKey={F5}
HealKey=6
RegenKey=5
HealAreaKey=1
DispelKey={F4}

[CharID]
Window Name1 Char ID=
Window Name2 Char ID=00022A41
Window Name3 Char ID=0003FBF3
Window Name4 Char ID=
Window Name5 Char ID=

[Offsets]
Fly Offset=1580
Jump Offset=2824
Zoom Offset=2042
Target Offset=2584
HP Offset=1092
MaxHP Offset=1140
MP Offset=1096
MaxMP Offset=1144

[RapidKeySend]
Key1=6
Delay1=50
SendKey1_to_this_window=Healer
Key2=
Delay2=50
SendKey2_to_this_window=
Key3=
Delay3=50
SendKey3_to_this_window=
Key4=
Delay4=50
SendKey4_to_this_window=
Key5=
Delay5=50
SendKey5_to_this_window=

[iNurse]
EP Window Name=Healer
HP Perc Tolerance=80
iNurse HealKey=6
BuffTimer=12

[GuiConfig EPRC]
iNurseWin1=0
iNurseWin2=1
iNurseWin3=1
iNurseWin4=1
iNurseWin5=1
iBuffWin1=0
iBuffWin2=1
iBuffWin3=1
iBuffWin4=1
iBuffWin5=1
iBuffDelay_InMinutes=15
iBuffKey={F5}

[GuiConfig iPot]
iPotHP Key={F2}
iPotMP Key={F1}
iPotHP Tolerance=50
iPotMP Tolerance=50
iPotHP1=0
iPotHP2=0
iPotHP3=0
iPotHP4=0
iPotHP5=0
iPotMP1=0
iPotMP2=0
iPotMP3=0
iPotMP4=0
iPotMP5=0

for my interface settings i have;
use [alt-w] to cmd char in wintitle : Healer
to follow another char with this ID : 00022A41
all my ibuff/iheal., inurse/iheal is ticked.

[Smurfin]

with that setting I think it should work, try to get hurt while your EP is around until 80%hp, or if a WB you can just switch from human form to tiger form, usually my EP auto heal my WB when I do that. For trying autobuff try setting it for 1 minute so you won't have to wait for long just for testing.

click [options] for EP Remote Control to see the remote command like alt-w,alt-b,alt-a,alt-v etc.

btw do not forget to set each ingame key according to what the command is for. for example I use '6' key ingame for healkey , F4 to dispel, etc
notice the hotkeys in bold, and see if your EP has the same hotkey in the game :


[Settings]
Window Name1=Element Client
Window Name2=Tanker
Window Name3=Healer
Window Name4=Element Client4
Window Name5=Element Client5
AutoWinActivateIfSwitched=ON
Base Address=9451524
Fly Hotkey={F10}
Jump Hotkey={F11}
CommandFollow_to_this_window=Healer
Char ID to be Followed=00022A41
BuffKey={F5}
HealKey=6
RegenKey=5
HealAreaKey=1
DispelKey={F4}

[CharID]
Window Name1 Char ID=
Window Name2 Char ID=00022A41
Window Name3 Char ID=0003FBF3
Window Name4 Char ID=
Window Name5 Char ID=

[Offsets]
Fly Offset=1580
Jump Offset=2824
Zoom Offset=2042
Target Offset=2584
HP Offset=1092
MaxHP Offset=1140
MP Offset=1096
MaxMP Offset=1144

[RapidKeySend]
Key1=6
Delay1=50
SendKey1_to_this_window=Healer
Key2=
Delay2=50
SendKey2_to_this_window=
Key3=
Delay3=50
SendKey3_to_this_window=
Key4=
Delay4=50
SendKey4_to_this_window=
Key5=
Delay5=50
SendKey5_to_this_window=

[iNurse]
EP Window Name=Healer
HP Perc Tolerance=80
iNurse HealKey=6
BuffTimer=12

[GuiConfig EPRC]
iNurseWin1=0
iNurseWin2=1
iNurseWin3=1
iNurseWin4=1
iNurseWin5=1
iBuffWin1=0
iBuffWin2=1
iBuffWin3=1
iBuffWin4=1
iBuffWin5=1
iBuffDelay_InMinutes=15
iBuffKey={F5}

[GuiConfig iPot]
iPotHP Key={F2}
iPotMP Key={F1}
iPotHP Tolerance=50
iPotMP Tolerance=50
iPotHP1=0
iPotHP2=0
iPotHP3=0
iPotHP4=0
iPotHP5=0
iPotMP1=0
iPotMP2=0
iPotMP3=0
iPotMP4=0
iPotMP5=0

[chaosbeta]

Thanks for that help, I thought i've got the autobuff working but it still isnt, whenever i target my elf and gotten his ID, i cntrl - 2 to get back to my tanker, then the target viewer ID goes to 000000 or goes to wat my tanker is looking, so should the smurfit be: smurfit - Healer?

Just found out, my ep does follow only when it gets close enough but the buff life doesnt correspond to what i've set currently, istead it buffs every 1 minute, because i used 1 minute to test and it worked so i changed it to 20 but it still buffs me every 1 minute, do i have to restart my game? i''ve restarted the hack already but no success. Another thing is that when my ep actually buffs, my target ID viewer is my Wb's because my hack is smurfit - Tanker, so my ep is constantly focusing on my wb so it only buffs him no 1 else

[Smurfin]

actually you can view other's ID from only one client window, for example you activate hacks on Tanker, if you want to view your ID you click your photo, if you want to view Healer's ID, just target your healer, and if you click on monster, the monster's ID will be shown, all IDs are shown while the hack is activated at Tanker.

if the target is 0000000 then it's because your tanker has no target selected.

in short, target id viewer will display any target's id selected by the char which client window name is activated in smurfit.

[chaosbeta]

Originally Posted by Smurfin

actually you can view other's ID from only one client window, for example you activate hacks on Tanker, if you want to view your ID you click your photo, if you want to view Healer's ID, just target your healer, and if you click on monster, the monster's ID will be shown, all IDs are shown while the hack is activated at Tanker.

if the target is 0000000 then it's because your tanker has no target selected.

in short, target id viewer will display any target's id selected by the char which client window name is activated in smurfit.

Yep, I've noticed that, so I should activate Tanker on smurfit? and it doesn't matter what my target viewer id is as long as its going to healer and follow (my wb's id)? Currently smurfit is on my tanker.
another thing, do you have any clue why my iheal doesnt work? and also how come the timer isnt getting updated, even though it is set at 20 minutes, it is still going by 1 minute (first time set).

[Smurfin]

it's up to you, you activate smurfit on any window you want to use the hacks, for example fly/jump/zoom/wall-hack, not just target id. EP remote/iheal/ibuff is not affected by that because its specificly using EP window name.

once you change the timer setting, untick ibuff and tick it again, that will reset the timer to the new value.

sorry, I still have no idea why it won't work for autoheal, btw have you checked your custom_settings.ini you got from mhs retriever and try it using mhs bot ? just to make sure if the hp mp maxmp maxhp offsets are correct.

or try it with smurfit's iPot,tick the []tanker in iPot, get hurt and see if pot usage will be triggered, remember to set pot hp/mp hotkey and hp tolerance, set it to 99% to be quick, just to test if it's working or not

[chaosbeta]

Originally Posted by Smurfin

actually one pack of complete working offsets from one PW region is all you need to determine all the other offsets you want.

as for hp mp maxhp maxmp, I think they're kinda differently located in memory and you can't calculate them with modifier from target offset, but you have each offset from your custom_offsets.ini, so start calculating again by using similar method as described above and you'll have your own offsets in no time ^_^

and don't forget to change the base address as well.

hmm, you are right my friend, my autopot doesn't work, the current offsets I am using i've calculated using the method u've metioned where i find out the difference between default indo and my custom offsets for hp. my custom offsets for my game version is:
HP_OffSet=1104
MaxHP_OffSet=1144
MP_OffSet=1108
MaxMP_OffSet=1148

[Smurfin]

sorry, I forgot, with MHS retriever you got your own HP MP HPMAX MPMAX offsets already, no need to do any calculation, they are already for your version. try using that raw.

btw how about the other hacks like jumphack/fly/zoom, do they work ?

[Pekken]

jumphack, fly and zoom all work.
Only have some problems setting up the buff and follow functions.
my ep only buffs herself, and the follow function only works sometimes for some unknown reason.
In the help you set that follow must be activated manually in the GUI, what you mean by that?
(and whats the dispelkey?)

Are there any known complications using double clients and MHS-bot?(1ep with this bot and 1wr with MHS-bot)

If you don't mind, could you check for faults in my ini?
(this offsets are for MY-EN)

[Settings]
Window Name1=Element Client
Window Name2=EPWINDOW
Window Name3=WRWINDOW
Window Name4=Element Client4
Window Name5=Element Client5
AutoWinActivateIfSwitched=ON
Base Address=9672940
Fly Hotkey={F8}
Jump Hotkey={F11}
CommandFollow_to_this_window=EPWINDOW
Char ID to be Followed=000**7D0
BuffKey={F5}
HealKey=6
RegenKey=5
HealAreaKey=1
DispelKey={F4}

[CharID]
Window Name1 Char ID=
Window Name2 Char ID=000**740
Window Name3 Char ID=000**7D0
Window Name4 Char ID=
Window Name5 Char ID=

[Offsets]
Fly Offset=1600
Jump Offset=2844
Zoom Offset=2062
Target Offset=2604
HP Offset=1108
MaxHP Offset=1156
MP Offset=1112
MaxMP Offset=1160

[RapidKeySend]
Key1=6
Delay1=50
SendKey1_to_this_window=EPWINDOW
Key2=
Delay2=50
SendKey2_to_this_window=WRWINDOW
Key3=
Delay3=50
SendKey3_to_this_window=EPWINDOW
Key4=
Delay4=50
SendKey4_to_this_window=EPWINDOW
Key5=
Delay5=50
SendKey5_to_this_window=EPWINDOW

[iNurse]
EP Window Name=EPWINDOW
HP Perc Tolerance=70
iNurse HealKey=6
BuffTimer=12

[GuiConfig EPRC]
iNurseWin1=0
iNurseWin2=1
iNurseWin3=1
iNurseWin4=0
iNurseWin5=0
iBuffWin1=0
iBuffWin2=1
iBuffWin3=1
iBuffWin4=0
iBuffWin5=0
iBuffDelay_InMinutes=20
iBuffKey={F5}

[GuiConfig iPot]
iPotHP Key={F2}
iPotMP Key={F1}
iPotHP Tolerance=50
iPotMP Tolerance=50
iPotHP1=0
iPotHP2=0
iPotHP3=0
iPotHP4=0
iPotHP5=0
iPotMP1=0
iPotMP2=0
iPotMP3=0
iPotMP4=0
iPotMP5=0

(i made some safety changes due to smart GM's =p)

[Smurfin]

Originally Posted by Pekken

jumphack, fly and zoom all work.
Only have some problems setting up the buff and follow functions.
my ep only buffs herself, and the follow function only works sometimes for some unknown reason.
In the help you set that follow must be activated manually in the GUI, what you mean by that?
(and whats the dispelkey?)

Are there any known complications using double clients and MHS-bot?(1ep with this bot and 1wr with MHS-bot)

If you don't mind, could you check for faults in my ini?
(this offsets are for MY-EN)

I mean the ifollow doesn't have a hotkey, so you have to tick it directly on the gui to use it, and ibuff+ifollow also don't have hotkeys. Dispelkey is the keyboard key you use for EP's skill to dispel negative buff.

so far I never encounter any complications using 3 clients botting at the same time using either MHS or zevorc's bot, and using SmurfIT for EP, running four clients with EP in total.

your settings look good as long as you have set the EP's skill keys according to the ini file or vice versa.

EP has 1 minute delay before buffing the next char, just wait one minute and your other char will be buffed.

for the follow command, you have to revisit your ep window once if that ever happened and get back to main char, also happened when your chars changing map, revisit and it'll work again. I think it's because the game is not using standard control as 'control' used in window. I can make it always works though, using different method but it'll unfreeze the EP window and that will use too much resources like if the EP window is active so I use this method, not a big deal you can reswitch quickly by using ctrl-1/ctrl-2....5