[Release] DAoCHaxx
 

Since i don't really play DAoC anymore, i wanted to share a little program with you, that works with latest versions (1.104+) undetected on live and freeshards. Maybe some of you can get use out of it, so my work wasn't for nothing. ;)

Current Features are:

• Save+Load position
• Jump to your ground target
• Rocketjump (easy to jump up any height with it)
• Flymode
• Undetected "Speedhack" which works by teleporting instead of walking
• Jump to x-y-z gloc positions
• Jump to a list of preset locations (which can be edited and added new ones)
• 24/7 ingame daytime
• Removed falldamage
• Turn left/right while stunned/mezzed (numpad keys 4/6, can't be changed yet)
• You can select the process that you wanna port with, in case you use multiple DAoC clients

As i said, this program also works on live servers, undetected. However you may use it at your own risk. One sidenote on live servers is, if you are teleporting too fast or too far away (like >5k locs/sec) you will get disconnected. You can still use it on live to travel fast, because if you login again you will be at the place where you ported before. On freeshards there isn't such a protection yet, so you can jump as far or as fast as you want. One funny thing on live is, if you PvE with flyhack, the mobs can't hit you, so its quite easy to lvl up a ranged char. Just don't get caught by other players, they might report you. :p

[Only registered and activated users can see links. Click Here To Register...]

If you have any problems, ideas or questions please post them here and i'll see what i can do.

Last but not least, Viruscheck: [Only registered and activated users can see links. Click Here To Register...]

One last thing, if you like this tool, it would be nice if you give me a Thanks by clicking on the Thanks Button on the right lower side of this post.

~Lanara

Important!

v1.0 is for DAoC Version 1.104 ONLY! It will not work with any other version.
v1.1 is for DAoC Version 1.105 ONLY! It will not work with any other version.
v1.2 is for DAoC Version 1.106 ONLY! It will not work with any other version.
v1.3 is for DAoC Version 1.107 ONLY! It will not work with any other version.
v1.4 is for DAoC Version 1.108 ONLY! It will not work with any other version.
v1.5 is for DAoC Version 1.109 ONLY! It will not work with any other version.

Screenshots:

[Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...]

Changelog:

v1.5:

• Memory adresses updated to 1.109 (will ONLY work with 1.109)

v1.4:

• Memory adresses updated to 1.108 (will ONLY work with 1.108)

v1.3:

• Memory adresses updated to 1.107 (will ONLY work with 1.107)

v1.2:

• Memory adresses updated to 1.106 (will ONLY work with 1.106)

v1.1:

• Reduced falling speed abit, to get rid of falldmg (feedback please)
• Memory adresses updated to 1.105 (will ONLY work with 1.105)
• Added README.txt for Installation/Usage informations

Hmm how does this work ?

using F1 to copy current location doesnt work. All i get, also from pressing the ? on first page is, 0 0 0.
When I change pages it resets to albion classiceven if i selected new fronitiers.

Nothing happens when trying to use this app really.

does this work in windows7, any resolution, windowed mode ?

Any guide how to set it up ?

Do you use the latest Version (1.104)? It won't work with any other version of DAoC. Yes it works with Windows7 at any resolution and in window mode.

F1 btw only saves your position, so you can jump to that spot by pressing F2.

Edit: Remember aswell that you have to run it as admin when using windows7 or vista.

pm sent

Update:

If the program isn't working for you with the latest version, you can load the fix for it at the end of this post. Just replace the game.dll with the one in your folder and put the daoc.bat there aswell. Then run the daoc.bat and it will pass the patcher so it doesn't reload the game.dll again. If you play on freeshards, you wont need the daoc.bat, just copy the game.dll then.

I'm going to fix this bug with the next version, but as long you can use the fix to get it working.

Edit: Removed DL from this post, because i added it to v1.0 in first post.

Removed falldamage <- not working for me.

but thx for the hax

Yeah i noticed, that i get falldamage on live sometimes, never got it while on local server. Might be due to some lag issues, going to tune it a bit for the next version. I'm currently updating the memory adresses for 1.105, so v1.1 will be up in like an hour i guess. I still let the v1.0 up for dl ofc, since most freeshards will need some days until they support 1.105.

detected on live server?

No, as i said in first post, this is undetected on Live, tho you will get disconnected (ld) if you move too fast, but thats just a simple disconnect, no ban or anything like that.

v1.1 is up now, working with 1.105.

Lanara, gehen überhaupt noch pbaoe bugspots? Die Gegner greifen doch seit einem gewissen Patch einen immer an, oder seh ich das falsch?

Wenn nein, welche "Gegebenheiten" müssen bei solch einem Spot vorherrschen?

Ein Bugspot müsste ein erhöhter Punkt sein, auf den die Mobs nicht rauflaufen können, aber nicht zu hoch, damit der PBAoE noch trifft. Beispiele wären da zB ein Stein, Zelt oder ähnliches. Keine Ahnung inwieweit die das mittlerweile gefixt haben, mit Flyhack aufm live lvln funktioniert aber, da die Mobs nicht in die Luft kommen, im Gegensatz zu Freeshards.

DAoCHaxx
 

Läuft dein schönes tool den nimmer noch ? .. ich bekomme das leider gerade nicht hin .. aber wir hatten auch einen patch ... wäre super wenn du mal feedback geben kannst: )
mfg
Jack

v1.0 funktioniert mit DAoC Patch 1.104 (für Freeshards)
v1.1 funktioniert mit DAoC Patch 1.105 (für Live)

Einfach game.dll in den DAoC Ordner kopieren und wenn du Live spielst die daoc.bat starten, damit er den Patcher überspringt. Dann DAoCHaxx.exe starten und Spaß haben. Bei v1.1 ist auch eine Readme.txt dabei.

framework macht probleme, sagt dir das was?

tip am rande ... beim chatten oder so keine tasten drücken die du in dem hack belegt hast :D

dann gibts auch keine probs

Lad dir das .NET Framework 4.0 von der Microsoft Homepage.

Have you tried this on Uthgard ? I'd be realy surprised if you get away with it for more than one day:)

As long as you don't get caught by other players that report you, you'll get away with it.

Wäre es denkbar das man das Mana oder die endu per instand wieder auffüllt ? Den Mana Stand kann man ja auslesen aus der Speicheradresse auslesen.

Nette Arbeit. Wie stehjt es mit der dedectierbarkeit auf nem freeshard server?

Grüße Baldur

Nein, das wäre nicht denkbar, da die gesamte Kalkulation diesbezüglich serverside ist.

Heute noch auf Uthgard und Eden getestet und auf beiden undetected. Ebenso aufm Live.

nur mal die frage wie testet man das?

Wie testet man was?

kann ich bestätigen ;)

daddel mit dem teil seit 2 wochen auf eden,und keine sau merkts ;)
ganz geil mitm hunter im stealth rumflitzen,warten bis sich en stoffi etwas aus der masse entfernt,und ZACk da liegt das stoffipack ^^
was ich aber des öfteren schon bemerkt habe,ist dass wenn ich mal ein paar runden durchgängig im bg rumdüse,kommt die meldung "Caution,from this point on you don't fight for your realm enymore,but your group" gefolgt mit der meldung fett auf dem screen "Glückwunsch,sie haben soeben die 12. reichsstufe erreicht". als ich die meldung das erstmal bekam,wurds mir warm ums herz,und ich dachte "nice,gleich mal zum trainer und alle wichtige ra's maxen",aber leider ist dies wohl nur ein bug,da man weder den reichsrang noch die punte gutgeschrieben bekommt.
aber trotzdem nochmal danke für das klasse tool,nice work.

btw. noch ne fage.
der bogenklassen haben ja nen recht hohen delay zwischen den einzelnen schüssen,gebs da ne möglichkeit,z.B. durch erzwungenen lag quasi 3 dinger zeitgleich rauszuhauen ? wär halt fein für instant kills ;)

Das mit dem "you don't fight for your realm anymore, but your group" liegt daran, dass auf Eden z.B, die 4. Insel in Thidranki eine PvP Zone ist. Wenn du dort bist kannst du also jeden angreifen, der nicht in deiner Gruppe ist, unabhängig vom Realm. Warum dann die RR12 Meldung kommt weiß ich auch nicht. :P

Zu deiner Frage, das ist leider nicht möglich.

Das programm funktioniert nicht!


Könnte ich bitte eine anleitung haben?

Danke :)

FYP.

Zunächst mal wäre es praktisch zu wissen, welchen Patch du nutzt und welche Version du runtergeladen hast. Dann wäre noch interessant, was genau denn nicht funktioniert. Mit einem "Das programm funktioniert nicht!" kann ich dir leider nicht wirklich helfen. :rolleyes:

Ive heard from a reliable source, that lanara is jean luc picard himself! ;)

Shhhh, that should have been a secret. :(

Its attached to my first post in this thread, so you can find it at the end. ;)

I know it's on the first post in the thread... I just didn't know it was the .rar files. I downloaded them, but, I'm 100% clueless...:o

Then chances are you shouldnt be using it at all. How did you get on the internet?

I hooked it up. I can do most of that stuff if needed. The only reason WHY I am asking for help is because when I download the .rar files, I try to open it, and nothing happens. THIS is where I need help.

No need for being a smart ass. Thanks. :)

Now imagine yourself right now. Some guy registers an account and ask for help doing the most basic of all stuff. How would you respond on an internet forum.

i tyred it and it just strafes so thanks for nothing ..? not trying to be mean

Maybe you should copy the game.dll into your DAoC folder? :rolleyes:

hi lanara, great job on this tool, any chance it will work with 1.06 or are you planning to make a new version for this patch ?

kommt n update für 1.106???

Uhm didn't know that they updated again, they should slow down abit. :P Going to make a version for 1.106 tomorrow if i have time.

also nen update auf 1.106 wäre hammer xD