elitepvpers - [Free BOT] AgBot(rev6) Releases & Support

elitepvpers (https://www.elitepvpers.com/forum/)

- SRO Hacks, Bots, Cheats & Exploits (https://www.elitepvpers.com/forum/sro-hacks-bots-cheats-exploits/)

- - [Free BOT] AgBot(rev6) Releases & Support (https://www.elitepvpers.com/forum/sro-hacks-bots-cheats-exploits/115015-free-bot-agbot-rev6-releases-support.html)

[Free BOT] AgBot(rev6) Releases & Support

Please Read this before asking questions!

Important!: If you have any information that fits in this post, send it to me or post it in here and if it's usefull i'll add it.. credits to you!

Yes this bot has loop! But it is still buggy! Loop is that it will buy pots, repair etc. and then goes back to hunting area

The recommended version (newest version with the less bugs) of agBot is 3.3.2

Quote:

WARNING: There are a Couple of agBot versions with Keylogger included out there..
so be SURE to download it from THIS page or the [Only registered and activated users can see links. Click Here To Register...], and nowhere else! Thanks.

Current Version of agBot:

Official Page: [Only registered and activated users can see links. Click Here To Register...]

READ THE README FILE

Quote:

Recent Changelog:

Quote:

September 4th:
[NEW] AgBot 3.1.2
-Clientless activated

Quote:

[NEW]AgBot 3.1.0
-Better attack speed and response time
-For security reason try to use the loader instead of mediapatcher
-Pk2 editing might be detected

Quote:

[NEW]AgBot 3.0.11
-Added tool pplayer.exe inside agbot package (there a readme file /record/readme.txt)

Quote:

July 5th:
[New] AgBot 2.9.15
[New] nuConnector 9.9

Quote:

June 9th:
[New] AgBot 2.9.10
[New] nuConnector 9.6

If you are not using nuConnector, please use it.
It is really appreciated,

How to make the loop work:
Don't post: Can anyone make a guide?! It's on the official bot website! This will soon be translated to your own language! Please let the translators do their job!

AVG-Problem?
For people who use AVG AntiVirus. This free tool is blocking agBot, so if you want to use it. Please turn off your AntiVirus and don't download something, don't visit internet sites, only play the game in the time that your AntiVirus is off!
Thanks.

Howto fix invalid target:
Thanks to zangetsu123

I used to get ALOT of invalid targets while picking up items.. Bot stops for a long time and didn't pick up items that dropped like gold/alchemy items etc etc ..
So the solution is as following;
Raise process priority of agbot above normal (It wont hurt your other programs when you raise process priority of agbot) once you did that.. all invalid target and other problems like picking up stuff will be removed..
Atleast its working for me ..
agBot is working for me like Tbot or any other bot without any bugs etc

Vista Problems (and sometimes WinXP):

Missing .ocx Files
Some people are getting error 339 (Missing .ocx file).
This are most of the time two files, first VbEclipse.ocx and after that comctl32.ocx and comdlg32.ocx. What to do with this error:

You need to have the three files: [Only registered and activated users can see links. Click Here To Register...]

Put the three files in your system32 map (C:\Windows\System32\). Stay in the system32 map and search for cmd. RightClick on it and run it as an admin. The command prompt will open. Type: "regsvr32 C:\Windows\System32\VbEclipse.ocx" without "" and press enter. It'll say the file is registered.

Another line to fill in: "regsvr32 C:\Windows\System32\comctl32.ocx" without the "" and press enter again.

And the last file to register: type: "regsvr32 C:\Windows\System32\comdlg32.ocx" without the "" and press enter for - finally - the last time

MOST QUESTIONS ABOUT THIS: agBot DOESN'T SHOW UP!!! (Vista) :confused:
If you work with XP, try installing the library files. On the bottom of this thread you can find a link!!!
This has to do with the Admin stuff. Solution:
First if you have patched with MediaPatcher, unpatch it.

After that, go to your silkroad folder (Standard: C:\Program Files\Silkroad) and select agBot.exe, nuConnector.exe and MediaPatcher.exe. One by one please ;). Right click on the file you selected and click properties, then select it to run as an administrator.
Patch the game and now it should have fixed the problem. But don't forget to run the bot and nuConnector as an admin!!!

Links:
Files

Download Link for the LibraryFiles: [Only registered and activated users can see links. Click Here To Register...]
Download Link for the .ocx Files: [Only registered and activated users can see links. Click Here To Register...]

References:

Webpage of Bot:[Only registered and activated users can see links. Click Here To Register...]
Wiki-page of Bot:[Only registered and activated users can see links. Click Here To Register...]
Loader: [Only registered and activated users can see links. Click Here To Register...]
NoDC: [Only registered and activated users can see links. Click Here To Register...]
Issues: With a agBot script! + Fixes!: [Only registered and activated users can see links. Click Here To Register...]
AgBot tutorial by Mass Mods: [Only registered and activated users can see links. Click Here To Register...] <---old but tells you the basics of setting the bot up

Guide for mc, how to install, how to use, etc.!
[Only registered and activated users can see links. Click Here To Register...]

Overworked by John Dread

#status - inVincibLe

Thnx Budy U Are Soo CoOL But I Hope All Understand That ( Thnx Again ) :)

You have to add the AGBOt Fix too
How to edit your skills that the Bot kills much faster
How to use it for Multiclient
And that File Missing Problem is not only a Vista Problem.

So add it to a good Thread or its only another half thread.
And then there would be no reason to led it open.

And With Copy and paste its really hard to read.
You should make better readable, because so you overread half of it.

Too bad agbot doesn't have a picking filter, I keep picking up rubbish -.-"

Quote:

Originally Posted by damien0124 (Post 894641)

Too bad agbot doesn't have a picking filter, I keep picking up rubbish -.-"

LOL it has one.

Quote:

Originally Posted by damien0124 (Post 894641)

Too bad agbot doesn't have a picking filter, I keep picking up rubbish -.-"

you have to go to config and then item select ^^

Maybe u can add the solution if ur Nuconnector closes if u open Silkroad...

Found it out myself and posted it in a small german board ^^

1.Open nuConnector Config.exe
2.Edit the ip from 121.128.133.26 to 121.128.133.27
3.Click on "Create Config File"
4.Click on "Ok"
5.Bot as always without closing Nuconnector

:)

Credits to kikyou2 ^.^

Ps: Don´t say i have it from another guy ... found the solution by myself =)

nice ^_^ i was away when u had send that pm so great job this will help alot of ppl

I took the Idea from h4x00rHT and made a new Multiclient Guide.
In this Order it works better it seems.
Especially because Revbot will get dc first in most cases ^^

Quote:

Howto Multiclient with Revbot & Loader_v5a:
* First you need a clean & up to date Version of Silkroad
* Then extract the Loader in it
* Copy the whole Silkroad Folder to a other Location and Rename it to any Name For example "Bot"
* Then extract the Revbot 1.4.7.2 Package in the Second Folder "Bot", und start Mediapatcher.

Now how to use it:
* Go back to clean Silkroad Folder & Start Loader.exe,
* Login your Stall char or the one you want to LVL
* Go to the Second Folder, called "Bot", start NuConnector.exe, than start agbot.exe and then Loader.exe,
* Login the char that will Bot
* now you have 2 chars logged in, hf

Guys Wat I Press When I Need The Bot Start Or To See Option ?

Nice, hope this gets stickied :)

Updated, if more nice things.. post them in here/to me, and i will add it.

Quote:

Originally Posted by FrankkkoJ (Post 894436)

Since there have been a lot of questions about RevBot - especialy for Vista users - I decided to make a new thread about it so everyone can read 'how to' in the first post.

I will collect this information out of this thread, out of the one from Gear123 (Thank you) and what i found out myself (about vista:D)

Update:

Howto fix the closing nuConnector when starting sro:
Thanks to kikyou2

1.Open nuConnector Config.exe
2.Edit the ip from 121.128.133.26 to 121.128.133.27
3.Click on "Create Config File"
4.Click on "Ok"
5.Bot as always without closing Nuconnector

Howto Multiclient with Revbot & Loader_v5a:
Thanks to SpriGgy

* First you need a clean & up to date Version of Silkroad
* Then extract the Loader in it
* Copy the whole Silkroad Folder to a other Location and Rename it to any Name For example "Bot"
* Then extract the Revbot 1.4.7.2 Package in the Second Folder "Bot", und start Mediapatcher.

Now how to use it:
* Go back to clean Silkroad Folder & Start Loader.exe,
* Login your Stall char or the one you want to LVL
* Go to the Second Folder, called "Bot", start NuConnector.exe, than start agbot.exe and then Loader.exe,
* Login the char that will Bot
* now you have 2 chars logged in, hf

Skill Delay Fix
Thanks to TBone0072!

To fix the skill delay go to your C:Program FilesSilkroaddata and open skill.txt

There you search for the skill that you are using. Like you're using elitepvpers-flame (example), go and search for elitepvpers-flame.

If u found it, then you need to change the numbers in the line as following;

After the first number which is the level of the the skill, change the next 5 numbers to 0.
Leave the next 6 numbers as they are and change the last number to 0. Do all your attack and imbue skills this way.

Example:

First you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,60000,15000,182,0,1,257,2,0,1

And after editing you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,0,0,182,0,1,257,2,0,0

Vista Problems (and sometimes WinXP):

Missing .ocx Files
Some people are getting error 339 (Missing .ocx file).
This are most of the time two files, first VbEclipse.ocx and after that comctl32.ocx and comdlg32.ocx. What to do with this error:

You need to have the three files: [Only registered and activated users can see links. Click Here To Register...]

Put the three files in your system32 map (C:WindowsSystem32). Stay in the system32 map and search for cmd. RightClick on it and run it as an admin. The command prompt will open. Type: "regsvr32 C:WindowsSystem32VbEclipse.ocx" without "" and press enter. It'll say the file is registered.

Another line to fill in: "regsvr32 C:WindowsSystem32comctl.ocx" without the "" and press enter again.

And the last file to register: type: "regsvr32 C:WindowsSystem32comdlg.ocx" without the "" and press enter for - finaly - the last time :p

After that; config shows up, nothing happens! :confused:

This has to do with the Admin stuff. Solution:
First if you have patched with MediaPatcher, unpatch it.

After that, go to your silkroad folder (Standard: C:Program FilesSilkroad) and select agBot.exe, nuConnector.exe and MediaPatcher.exe. One by one please ;). Right click on the file you selected and click properties, then select it to run as an administrator.
Patch the game and now it should have fixed the problem. But don't forget to run the bot and nuConnector as an admin!!!

Downloads:

Download Link for the bot: [Only registered and activated users can see links. Click Here To Register...]
Download Link for the LibraryFiles: [Only registered and activated users can see links. Click Here To Register...]
Download Link for the .ocx Files: [Only registered and activated users can see links. Click Here To Register...]
Download Link for All-In-One: [Only registered and activated users can see links. Click Here To Register...]

hi franko, i do everything what u say, bu i hv this prob.:( [Only registered and activated users can see links. Click Here To Register...]

Guys,
everything in the AgBot works fine for me except one thing. I can't add more than one imbue. If i try to do that, it will replace the old imbue. But i can add more than 1 buffs, more than 1 attack skill but only ONE imbue? why?

Well thats logical, you can only use one imbue at a time, and you can reuse the imbue when it wears off since the imbue cooldown is the same or less than the time the imbue takes before it wears off ... so there is no need to add multiple imbues.

When i add a buff to the skill list, it only tries to use buff, nothing else.
character just stands there buffing...
anyone have this problem too and know how I can solve this?

Quote:

Originally Posted by ykz (Post 895119)

When i add a buff to the skill list, it only tries to use buff, nothing else.
character just stands there buffing...
anyone have this problem too and know how I can solve this?

Did you added attack skills?
You use chinese char or euro char?
What Buff u talk about?
Would the Buff need special weapon or shield?

Hm by the way, even if this thread is a nice recap of all the other Revbot threads ... isnt it time that these threads stop begin made? I mean come on there are so many guides to be found everywhere, and if people just read the readme then the bot will work in 95% of the time :o

Just remove all the threads with questions, and let them swim if they cant figure it our for themselves ... of course some issues are different, and they deserve help, but there have been like 1000 dumbasses who asked the same question and all they had to do was read the readme and install the damn libaryfiles ;)

Sorry if this seems flamish

Quote:

Originally Posted by whoosj (Post 895299)

Ähm 1. its hard to find all the Guides to revbot, because for every chapter of this recap, existed a own Thread.
2. In the readme only stands how to install & config, nothing about fixes or multiclient.
3. The noobs will spam questions so or so!!! Maybe so there are is 1 fewer a day xD

#Status - inVincibLe
Good job guys.

any idea how to REDUCE DC IN TOWN?
i think it bug came from rev/agbot

Quote:

Originally Posted by SpriGgy (Post 895176)

Did you added attack skills?
You use chinese char or euro char?
What Buff u talk about?
Would the Buff need special weapon or shield?

I use a Euro char; Wizard/cleric
I added several attack skills, but the bot only uses earth barrier and does nothing else, except if i double click a mob, then it uses the attacks.

but i also got this with my chinese character
when I add imbue to skill list, the bot only uses the imbue and nothing else.

but when i add the imbue or buff as an attack skill, it works, but then it overuses the buff/imbue..

hmm dont know then.

@FrankkoJ
Could you add a Link to the Loader Version 6 & to Greyfox 1.141 Fixed Thread to the first Post?
Wouldn't be wrong i think.

are there some options for the berserker mode?....would be cool if he would uses berserk only at giants ^^

Quote:

Originally Posted by stranger21 (Post 895072)

hi franko, i do everything what u say, bu i hv this prob.:( [Only registered and activated users can see links. Click Here To Register...]

You forgot to place .ocx behind the VbEclipse ^^

@SpriGgy;; Yeah sure I will add it right away ^^

Quote:

Originally Posted by sascha89 (Post 895710)

are there some options for the berserker mode?....would be cool if he would uses berserk only at giants ^^

Yes there is a option for Berserk, its in the Config Tab and click "Cast berserk" Still its no option to zerk on certain monsters or anything like that. It just cast the zerk.

Nihplod @ Admin Rev6

Quote:

Originally Posted by whoosj (Post 895112)

so is that how agBot is really made? i mean, are you like really supposed to add one imbue only .... or you can add more if you want to?

I Have all the skills that I normaly used.. it isn't a problem for me, and i don't know why urs is doing it..

EY KAnn einer germany meine icq 312845159

i've got a problem, if i open nuconnector, there stands: listening for bot connection, but when i start agbot nothing comes up, plz help

Quote:

After that; config shows up, nothing happens!

This has to do with the Admin stuff. Solution:
First if you have patched with MediaPatcher, unpatch it.

After that, go to your silkroad folder (Standard: C:Program FilesSilkroad) and select agBot.exe, nuConnector.exe and MediaPatcher.exe. One by one please . Right click on the file you selected and click properties, then select it to run as an administrator.
Patch the game and now it should have fixed the problem. But don't forget to run the bot and nuConnector as an admin!!!

READ READ READ READ!!!!

Quote:

Originally Posted by taxiflo2006 (Post 895933)

EY KAnn einer germany meine icq 312845159

No not related SPAM here.
#1 Warning

@Frankko
Wouldnt it better you link to the Fixed GreyFox NoDc Client, not the Beta ^^
This Version has Bugs

Still nothing for the x64 Vista?

There is a thx Button, next time better use this instead of Spamming, it only makes Threads harder to read.

Quote:

Originally Posted by FrankkkoJ (Post 895962)

READ READ READ READ!!!!

Frank i did everything and when i open nuconnector and agbot it opens a window saying "Load Data" and i select "Config1" then it oepns another window irc Chat client to chosse a nickname in there i put my nickname and then nothing happens....... :P am i missing something? :confused:

Ps:i open everything with admin and the client is also patched :S oh and i use Vista and i didnt got any error

Take care

what do u mean by nothing happened? you have to open the client next

is there any solution for DC after 30 min or a hour at max
in old ver i was bot over than 12 hours perday but when i upgrade into 1.7.2 all the time get DC without any reason b4 :s :confused:

i dont know where is the problem
but i'm still agree Rev bot have problem with Nuconnector and patching media.pk2 :mad:

need ur openions plz

Quote:

Originally Posted by SpriGgy (Post 896087)

No not related SPAM here.
#1 Warning

@Frankko
Wouldnt it better you link to the Fixed GreyFox NoDc Client, not the Beta ^^
This Version has Bugs

Yes I allready thought that, but if u can send me the link, or edit it urself,.. cause i couldn't find it ^^

Quote:

Frank i did everything and when i open nuconnector and agbot it opens a window saying "Load Data" and i select "Config1" then it oepns another window irc Chat client to chosse a nickname in there i put my nickname and then nothing happens....... :P am i missing something?

Ps:i open everything with admin and the client is also patched :S oh and i use Vista and i didnt got any error

Take care

Yes that's good, the only thing;; u dont have to login to IRC, look at nuConnector again, it says;; listening for bot;; then u started the bot.. GOOD.. then it says another thing;; Listening for sro_client.exe.. so u just start sro the normal way.. login, and if it works;; it'll add ur info by itself..