ihave server but icannot connect to the server!!
 

hey guyz ihave my own server everything idid was good no errors at all iran xmap after dbmon done connecting me to 127.0.0.1
some screenshots:

xmap:

[Only registered and activated users can see links. Click Here To Register...]

dbmon:

[Only registered and activated users can see links. Click Here To Register...]
and istarted apache server and then iwent to my local pc out of vmware
started clinet in my desktop ididnt install any dk on programme files
and iwrote my use and pass then cannot connect to the server!
btw ichanged serverfiles ip to 127.0.0.1 and loginlist and channellist to 127.0.0.1 too what i missing?
but idont know how set ip on xmap maybe thats the problem ijust started it and ran apache server :D
shoulde i use hamachi?
iam using vmware win 2003, iran dekaron clinet in my local pc not inside vmware
story of my life lol
and special thx to all of your helps!.

first thing i would check is the network adapter since its a vmware image and you most likely are just copying and pasting so i would start there.. i bet the ip doesnt even match your sub address or is even on you local network.

please make steps so ican fallow idont get ur point :D
sorry!

channellist & loginlist are 127.0.0.1? sounds like your not doing something right.

what are you doing? public or hamachi server?

well if you are not running a dedicated server or did the non hamachi tutorial
you need use hamachi

In Vmware, select properties of the server
Select Network Adapter
Set the following

[*]Check "Connected"[*]Check "Connect at power on"[*]Check "Bridged: Connected directly to the physical network"


Start the virtual server
Once loaded to go:

Start => Control Panel => Network Connections => RIGHT CLICK "Network Connections" and select "EXPLORE"

Select Local Area Connection (NOT 2!)
Right Click on Local Area Connection => Select "Properties"
In the tab "General" select "Internet Protocol (TCP/IP)
Click "Properties"

In the tab "General"
Check:
[*]Obtain an IP address automatically[*]Obtain DNS server address automatically


Click "Ok"
Click "Ok again"

Still in the "Network Connections"
Right Click on Local Area Connection and select "Repair"
now windows will delete and re-cache all settings and repair the network connection

PyrexiaStudios
said it better

Don't use hamachi, hamachi is for nubs. If ur using a VM use the IPv4 address of the VM to connect.

iam doing 127.0.0.1 testing not hamachi or public



u mean the one in the network wich is 192.168.x.xx?

icant find local aera connection 1
all isee is local aerea connectio 2
and new connection wizard
and btw ihave this message when i run the windows in vmware
unable to open network mapping library.
detail:
Please verify host is set up correctly.
Virtual device Ethernet1 will start disconnected.
what is that?

Yes, use 192.168.xxx.xxx

sorry forgot to ask u where to use it in login server and channel list and loginlist or all dekaronserver ??

use it for login and dekaron server, cast and session is 127.0.0.1.

k thx what about channel list and loging list?

Same use that 192.168.xxx.xxx, your treating it like your public server ip.

the server works but how can i make it public and how to make my self gm with all staffs? imean +9 and divne noble items and hp,mana? plz tell me
ineed more staffs tut plz put it here :D
and thx !
special thx to [BioNicX] he helped me so much !