AggroBot v0.2
 

Hello,heres a bot i programmed in autoit.
<<<<<<<<<<<<<<<<<AggroBotv0.2<<<<<<<<<<<<<<<<<<<<< <<<<
Changelog:
Added a pixel based autotarget bot.
Change F9 to toggle start stop.
Added emergency stop {End}
fixed an auto buffing bug in v0.21

v0.23:Fixed some bugs,added mem tab which show some info,making an autopot next version.Note:Run element client be4 running this bot.

Feature AT:
1)Set ur own scan area wif a cool red box indictor(Got the idea from a guy in autoit forum)
2)set ur own shade variation
3)Set ur own step(To Skip pixels)
4)Set own colour
5)Set own offset to click

Instructions:
1)Edit AT settings(Click set scan area,use hotkeys 9 to set top left corner and 0 to set btm right corner.Experiment wif it to see wat it means)
2)Save Setting
3)Enable AT(Note:When Enabled,bot is not running)(HotKey F10)
4)Start Bot(Hotkey F9)
F11 toggle visible scan area
Note:Disable character name and enable monster name.
Its not perfect,can be very buggy.It can be hard to use so juz ask any questions.
pixel bot may nt be good but in games like 2moons pixel bots are good(even edit models of monsters for easy pixel searching)

Note:If it does not work rmb to calibrate,go in game click a mob then press insert key.

Best used wif the zoom hack,viewed from the top.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< <<


<<<<<<AggroBot v0.1<<<<<<<
Intro:
This bot basically pixel scan a color which appears when a monster is targeted,and react as it programmed to.When a monster is agressive to ur character,the bot would retaliate.


Features:
1)Auto retaliates agressive monsters.
2)Auto use of skills
3)Option to auto buff,loot,stop
4)Graphic interface

Instructions:
1)Run PW
2)Run AggroBot
3)Go settings>>calibrate>>press ins when a monster is targeted.
4)Edit ur settings and save
5)Edit ur skills settings and save
6)Press F9 to start F10 to stop.

I have yet to find a way to target a nearest monster,if you have plz share.
Feel free to post bugs,comments,advices.

Zevorc ,enjoy
<<<<<<<<<<<<<<<<<<<<<<<<<<

Edit:added source,juz share the edited work,make it a open source.
working on a pixel based autotarget bot since i know nuts about packets decrypting.

Man finally found the pointer to the player object(After 2 days),if any1 need it here:
8F71DC +20(Offset)
Some uses for it:+450(Offset)(Current Hp)
+478(MaxHp)
+454(CurrentMp)
+47c(MaxMp)
+464(Vigour) +many more diy
Can be used to make autopot etc.This addresses are for my-en ver.only.

EDIT:Added a much needed guide

Going to try this out seems clean accept for the trojin thanks for the bot
Edit:its clean and it works i thought it was a bot to walk around and kill stuff for you but it kills stuff only when things hit you or you click the monsters name
here is scan results:

jotti says..

File: AggroBotv0.1.exe
Status: INFECTED/MALWARE
MD5: 1fbfb4c1e84e1f42c9ef9b4986bbe1f4
Packers detected: PE_PATCH.UPX
Bit9 reports: File not found

Scanner results
Scan taken on 19 Jan 2008 20:40:47 (GMT)
A-Squared Found nothing
AntiVir Found nothing
ArcaVir Found Worm.Sohanad.Aw
Avast Found nothing
AVG Antivirus Found nothing
BitDefender Found nothing
ClamAV Found nothing
CPsecure Found nothing
Dr.Web Found nothing
F-Prot Antivirus Found nothing
F-Secure Anti-Virus Found nothing
Fortinet Found nothing
Ikarus Found nothing
Kaspersky Anti-Virus Found nothing
NOD32 Found nothing
Norman Virus Control Found nothing
Panda Antivirus Found nothing
Rising Antivirus Found nothing
Sophos Antivirus Found nothing
VirusBuster Found nothing
VBA32 Found nothing
..............................

*imo* its clean, this one report is normal,if you play around with autoit,and .exe it,it uses some UPX Compression.
try it yourself,make a autoit,exe it,and check your trial,you would get the same.
but i would ask for the sourcecode,its somewhat slow..anyhow,did you use range 4 as scan? if yes,try a 16,this is way faster,and for the "next mob" part,you cant do that this way,its packet based,not pixel.
but a good try,
lots things to add,but its a base.

only to aggro ?

i dont get u,i only used pixel search for detecting the monster info box when u click a mob,i never used any mem&packet reading functions in it.

And yes this bot only reacts to aggro monster unless u have another bot which auto targets monsters which now is not available yet.

You should share the source... i think here in forum there're a lot of programmers who can improve it.

what about making a group which trys to make a autoselect bot? Shouldn't be hard. It's better to make bots which are only attacking aggro mops. It would be pretty cool if we can create a group which is sitting around to find a way to get the mop packets and to find out the way to get them as a target! But any1 nice release.

its the pixelrange, means every 4 or every 8,or even 16,
with such a large range,of a target scan,it doesnt need a pixel by pixel,its ok if its every 16,this making it act faster.
doesnt have todo anything with mem or packets,

the 2nd art is wrong,there r target bots aviable,they r based on mem-adress,and there is the prob,they wont work for the int,and only a few work for the my-ch,its tricky to change them,and aslong noone gets the int adresses,they wont show up for them(i play on mycn)

oic,the range i set at zero becoz the scan area is small and putting a high range may skip the desired pixel but it shouldnt be slow,it can scan a 1024x768 in 40-60 ms but may lag ur comp.Edit the source if u want.And yea nt avaliable mean nt available to my-int ver yet,still curious on what mem-address is it based on?monster locations?

they use the part for the screen,few examples,they notice a player in range and start looting(what they normaly not do at all,they get money by taming every 5.-10. mob),they notice mobs behind them
means,basicly if the screen "have to show up a mob" they notice this and use this,its pretty intresting,because with that base they made bots,without even need of a client.
basicly the bots r sometimes(not all but some,also for other games) acting like videocards,and get the same memory changes,and act very fast.

noticing mobs behind them is the most valuable point,because the memory knows it,the vid,already knows it aswell,but the screen cant see it,but if they turn,they would notice it immently.

they used another bot in the closed beta,what worked with radarcheck,(like 6.sense for AC) but this didnt work out well,way t slow.

the prob is,they talk to you,they even answer you,but they wont tell you how to get around the vality check,because they make money with selling this bots.the only bots what you could get atm,r cracked and work only for a couple of days..,very intresting is the work from bottmall,they dont have this game ,but some brains behind them,use very very complicatet routines.
(i dont comunitcate with the bottmall guys,but the bots they use,look at them,they r real intresting,even if the moneycheck more simple then on the PW chinese bots.)

the source file unrar in the same folder ? thx

its up to u,if unrar into same folder it juz uses the same config.ini wif the .exe.
Added AggroBotv0.2

=.= havin hard time download 0.2

ehh.. can you explain how the program works? as in the follow?

ok...
1)The bot scan the mid-top part of the screen to find a colour which appears when u target a mob.
2)The bot retaliates(send skills keys) accordingly to settings.
3)With AutoTarget enabled,the bot scans an area defined by user to find a colour(Mob Name)then clicks it.
4)auto stop and buff is quite self explanatory

Check it out:
Can be used wif the auto target,turn on the NPC ID then off the mob name,then set pixel search colour to 16776960.props to arschkeks
[Only registered and activated users can see links. Click Here To Register...]