mmm some one know if the new Version of the bot can use DOT now?

DOT = Dmg Over Time (the Warlock skills)

All versions do that if u change the value of the line of this skill in the agbot/dat/skill.txt file.
U have to change the value wich is like 5642789123 and this must be the time of recast in ms.It is 12 sec for most of this skills so just have to put 12000 and this will work.
It is the same for some others euro skills like recovery division.
U can also try to download the new data file was post on rev6.com/bot, maybe they have change it already i dont have try it yet.

this is my Blaze on agbot/dat/skill.txt :

"91230000","SKILL_EU_WARLOCK_DOTA_BURN_A_01","Blaz e",4,0,0,1166,3000,1650619750,547,0,1,516,2,0,1 ,21
"92230000","SKILL_EU_WARLOCK_DOTA_BURN_A_02","Blaz e",8,0,0,1166,3000,1650619750,547,0,2,516,2,0,1 ,34
"93230000","SKILL_EU_WARLOCK_DOTA_BURN_A_03","Blaz e",12,0,0,1166,3000,1650619750,547,0,3,516,2,0,1,4 9
"94230000","SKILL_EU_WARLOCK_DOTA_BURN_A_04","Blaz e",16,0,0,1166,3000,1650619750,547,0,4,516,2,0,1,6 7
"95230000","SKILL_EU_WARLOCK_DOTA_BURN_A_05","Blaz e",20,0,0,1166,3000,1650619750,547,0,5,516,2,0,1,8 7
"96230000","SKILL_EU_WARLOCK_DOTA_BURN_A_06","Blaz e",24,0,0,1166,3000,1650619750,547,0,6,516,2,0,1,1 10
"97230000","SKILL_EU_WARLOCK_DOTA_BURN_A_07","Blaz e",28,0,0,1166,3000,1650619750,547,0,7,516,2,0,1,1 36
"98230000","SKILL_EU_WARLOCK_DOTA_BURN_A_08","Blaz e",32,0,0,1166,3000,1650619750,547,0,8,516,2,0,1,1 66
"99230000","SKILL_EU_WARLOCK_DOTA_BURN_A_09","Blaz e",36,0,0,1166,3000,1650619750,547,0,9,516,2,0,1,2 00
"9A230000","SKILL_EU_WARLOCK_DOTA_BURN_A_10","Blaz e",40,0,0,1166,3000,1650619750,547,0,10,516,2,0,1, 238
"9B230000","SKILL_EU_WARLOCK_DOTA_BURN_A_11","Blaz e",44,0,0,1166,3000,1650619750,547,0,11,516,2,0,1, 281
"9C230000","SKILL_EU_WARLOCK_DOTA_BURN_A_12","Blaz e",48,0,0,1166,3000,1650619750,547,0,12,516,2,0,1, 329
"9D230000","SKILL_EU_WARLOCK_DOTA_BURN_A_13","Blaz e",52,0,0,1166,3000,1650619750,547,0,13,516,2,0,1, 384
"9E230000","SKILL_EU_WARLOCK_DOTA_BURN_A_14","Blaz e",56,0,0,1166,3000,1650619750,547,0,14,516,2,0,1, 445
"9F230000","SKILL_EU_WARLOCK_DOTA_BURN_A_15","Blaz e",60,0,0,1166,3000,1650619750,547,0,15,516,2,0,1, 514
"A0230000","SKILL_EU_WARLOCK_DOTA_BURN_A_16","Blaz e",64,0,0,1166,3000,1650619750,547,0,16,516,2,0,1, 591
"A1230000","SKILL_EU_WARLOCK_DOTA_BURN_A_17","Blaz e",68,0,0,1166,3000,1650619750,547,0,17,516,2,0,1, 678
"A2230000","SKILL_EU_WARLOCK_DOTA_BURN_A_18","Blaz e",72,0,0,1166,3000,1650619750,547,0,18,516,2,0,1, 775
"A3230000","SKILL_EU_WARLOCK_DOTA_BURN_A_19","Blaz e",76,0,0,1166,3000,1650619750,547,0,19,516,2,0,1, 883
"A4230000","SKILL_EU_WARLOCK_DOTA_BURN_A_20","Blaz e",80,0,0,1166,3000,1650619750,547,0,20,516,2,0,1, 1003
"A5230000","SKILL_EU_WARLOCK_DOTA_BURN_A_21","Blaz e",84,0,0,1166,3000,1650619750,547,0,21,516,2,0,1, 1138
"A6230000","SKILL_EU_WARLOCK_DOTA_BURN_A_22","Blaz e",88,0,0,1166,3000,1650619750,547,0,22,516,2,0,1, 1288

so what do i need to change to 12000?

yes it can use the DOT skill

u need to change this :"91230000","SKILL_EU_WARLOCK_DOTA_BURN_A_01","Blaze",4,0,0,1166,3000,1650619750,547,0,1,516,2,0,1,21 and make::"91230000","SKILL_EU_WARLOCK_DOTA_BURN_A_01" ,"Blaze",4,0,0,1166,3000,12000,547,0,1,516,2,0,1,21

for the first lvl 01 of the skill
do the same for all the lvl ( in green )
and make the same for the others DOT skills.

*edit* Im sorry bad post i should have looked better for what i was looking for :9 i am an idiot sry for the spam.

Love ya guys ...Everyone dont forget to donate that 10$ now and again for the cause :)

w00t thx alot man ^^

DOT works now :D

Hi guys.. i am new at agbot..pls tel me how can i set that the my wizard, uses bard bufs before using wizard skills,emm simply-buff himself an then go atack with wiz staff/skills

Go to config then to skill list, and add your skills accordingly, you may set your imbue skill, your buffs, and your attacks skills there, and within the main config, check buff high priority to buff before attacking.

Best Regards,

Mass Mods.

yea but... i have buffs on y bard mastery and wiz atack skills if i click start bot it says that i can't use skilos with staff.. i have to switch to the bard activate skills and then swithc back to the staff and start killing..how i can let bot to do that? that he switch weapons

at the moment weapon switching is not available...but it will soon

ohh thx 4 anserw

Bot is not marking monsters, so in fact it can't kill them. Raised the priority of AgBot.exe alrdy, any ideas?

Maybe your monster select is not good.

Open it up in "Config".

agbot can go and bot in cave?..if yes..how?...pls answer me

It's correct...

Yes, it can. But you'll have to make your own script, and you'll most likely get stuck in the cave :rolleyes:

Does your nuConnector make connection?
You can easily check that by clicking on the "Autoparty" button.
If you click it, your party should be registered in the party matching system.

If not:
1. Make sure you have patched your SRO-files with the MediaPatcher.
2. Open up nuConnector, there should be "listening for bot connection"
3. Open agBot, there should be now "listening for sro client"
4. Open your client!

If you use loader, you don't need the mediapatch. Just redirect your ip ;-)

agbot
 

my agbot always get dc after 15min WHY???

try srproxy

Wat meer informatie is ook wel handig, zo kan niemand je natuurlijk helpen. Kijk naar je eigen usertitle.

English: Some more info would be usefull, this way nobody can help you. Look at your own usertitle.

Is it possible to switch weapon and buff myself? (most in european chars) For example to buff my rogue with bard buffs, then switch back to xbow/dagger

If this question has already asked, then sorry!

u wanna do it manual and babysit the bot or what? well the bot itself cant switch weapons atm

Yes I would do this with bot. :(
Anyway thx the answer!

my bot stop walkscript after bot teleport to town. at storage keeper, its sad, you got an error, script stop now..., after i klik on the start walkscript, its dont have any problams, so how does it can be
its always do the first time if i start walkscript at town(ht), but if i try second time its dont have any problam
i made my script with AgDev (demon eye 68-70mobs)

....and where i can bot at lvl 64..im glavie full str..

I recommend grinding on mobs 2 lvls lower than yours, as your chances of sos drops are higher, and if you get a drop like that at that lvl then you will have some good profit, not only that, but you are less likely to die when getting ganged up on. Just my opinion.

ya hmm...maybe you right..but...all my garment have +3 or more and good blue..and my glavie its lvl 64+5 crit 11 very good blue..i think i can kill easy kara..right?..i think:D

Shouldn't be a problem, but while you sleep, its safe to grind lower, just in case, you don't wanna wake up and see like 4% gone cause at that lvl it takes a while to get back.

ya you right:D...

still w8ing for help :mofo:

i have the same error some times when it's at town looping , don't tuch anything if you at sro ^^ or just minimize the client and it whount get the error ^^

I have it too, but with clientless, so you can't minimize the client...
Might check the NPC-code...

i am using clientless agbot^^

then i don't know sry

Bah, I can't make the bot loop... It stays in front of the shopeeper and does nothing.

@wtfanoob:
this happens always when u teleport back? well I dont know a complete solution for this but try just clicking on start walkscript again. then he should restart. maybe anyone knows how to fix this completely

I have still the same problem.
My agbot doesn't want to start when I press Start Bot.
I'm using the newest agbot, nuConnector71. I start nuconnector, it see when I open agbot and It still connect when I open sro with loader (with redirect). I see my player name and stats in agbot, I set up everything. But when I start Start Bot or Start AutoParty NOTHING happens! I can't solve this problem and I'm realy sad cause when I used this bot 1 months ago it worked. But I have reinstall sro and now it doesn't :(

Thanks all helping!

Using teleport or not or clicking again start walk it doesn't open the storage. I've used AGdev to create scritps, used some scripts from rev6 page and even made my own ones but nothing. I use Clientless no dc client btw...

@Andriskaa:
did u save your script in agbot script window?

@wtfanoob:
already tried to use it with original client without clientless?