For all users having problems with older releases running in to walls, please download the newest version, it works like a charm, has not run in to wall yet! Make sure secure step is checked in the config section, it should be by default, it is simply perfect imho, gj coders, you are on to something good now.

AgBot 2.3.10
Can be downloaded here.
[Only registered and activated users can see links. Click Here To Register...]

Link taken from here:
[Only registered and activated users can see links. Click Here To Register...]

Also comes with nuConnector 71

Just simply extract the 2 files in to your already existing agbot folder overwrite old files, this is the one that is the best!

Enjoy!

I would also like to encourage users to support rev6 team by donating to continue the support of the bot that we use for free, it has been there when other bot companies have not. Please donate w/e you can, as it will help with future releases, maybe someday clientless. That would mean we can own all servers and push no life users out once and for good! :p

anyways, gj rev6, Team Pi coders and PARADOX supports your efforts, would just like to point that out.

Thanks but... i already got that ;)
Its not everytime, just sometimes.

Sometimes it runs in to walls?

I have yet to have this problem, the bot stops at every point to make sure its on coordinates. Hasn't failed me yet.

Sorry i cant say you how he did, just were sleeping. Like a worker that only works fine if chef is there :P

lol, mine hasn't messed up at all, is all I am saying, it has gone back to town and back to hunting area 8 times now without messing up, before, with old version, every time I pretty much got stuck, now it never happens.

the hunt run 5 mins and stop
and i must close the bot and open it again
any answer?

The new version of the bot works perfectly fine, the only bug that i experiencing right now is the skill buff ( grasswalk flow and white hawk sommon ). No problem on NPC, walkscript, attack and teleport to town. The dc is still there but to a minimal.

Turn off the processes (winzip, download manager, CD in burner, etc.)that u dont use, before botting to prevent conflicts.

To all bot users please support the rev6 team for this tool, they deserve it and thanks to the REV6 TEAM all credits goes to them.

I have already asked it and it was answered as agbot uses this to buy pots because ...!!!I dont remember answer :)

this version doesnt use my buffs ;)

Any people speaking dutch here??? cause i cant explain my problem in English:P

Als ik die 3 files download word het geopent met adobe reader en dan staat er: Adobe Reader could not open '_dot_ocx_Files.rar' beacause it either not a suppotive file type or because the file has been damadeg (ofzoiets :S)

Maar dan probeer ik het met een ander programme te openen maar met welke moet dat dan?????????

i see that everyone uses this bot. I also do, but i don`t know how to make the loop work.
I red the tutorial, i even downloaded Script Manager (or somthing, it creates scriopt imediatly), but it doesn`t loop . If someone can help me i`d appreciate.

Thanx for the latest update... It seems like I finally got the walkscript to work properly. Btw, how can I get it to use grasswalk during the walkscript?
i tried this line (took it from the agbot scriptgenerator):
"Inject","72CD","0104FD04000000" - LvL 18
but agbot just says its an unknown command and then the bot stops

Hi, the fix for that is to turn everything on the bot off, like walk, and start bot, etc.

Then go in to your bot skill list, and delete everything, then re-add them normally, then add your imbue etc, then start botting :)

It will work.

Think Grasswalk is bugged, tried it but agbot goes crazy and want to go somewhere i dont know :P

You are not doing something right.

The only bug is it targeting mobs through trees.

And can someone shed some light on the wolf auto hgp potion? And sitting down...

Why can we not use that, is it like a tease for us or something? We can see, but cannot use it, put pizza on the menu but don't actually serve it to us. Same difference :]

+#<2695+2696>Reported at<22.07.08><19:57>cause<Doublepost>

use Edit-Button

agreed :D

wanted to ask also about inv-to-storage. lets say i got int 8d tab in storage, and int 8d tab in inventory, when i will use bot, am i gonna see 2xint 8d in my storage or int8d and int8d ?

does anyone know of a a command or inject that can make the bot use a return scroll

sometimes my bot buffs after start bot grss walk flow OR white hawk summon and then he does it again and again :mad: until there no more mp potions, i can fix it if i debuff myself and then buff on my own then it works for next times too

EDIT::::

[Only registered and activated users can see links. Click Here To Register...]

My Grass-Walk-Flow is Lv 4 and ingame he used the right skill!

What you will need to do is make sure you are in game, but the bot is not moving or using anything, turn off walkscript and bot. Best place to configure is in town where there are no mobs attacking you.

Go to skill bot section, delete everything.

Then, go to skill list.

Within the skill list you will see your available skills that can be used for attacks, buffs, and imbue.

imbue is anything related to cold/lightning/fire that can be fused in to a weapon while attacking.

Commonly people get buffs and imbue skills mixed up, causing the bot to go haywire and constantly buffing, thus screwing your botting experience up.

Make sure you know what to place your skills as before you start choosing add buff or imbue. Best way to determine is to physically go in to your SRO and press s showing your skills, and what goes where. This is the safest way to determine if you are adding it as a buff or as imbue skill.

This is just my advice, only use 1 imbue skill, the one that does the most damage that can be combined with your weapon skill, as you cannot use 2 imbue skills at the same time, so using more than one is pointless.

Buff skills can be added as needed, it is safe to use multiple ones simultaneously without conflict.

Weapon skills may be used with other weapon skills as well without problem, although I only choose one and it works fine for me.

Determine what does the most damage, and go with that.

Best Regards and happy botting to all.

Mass Mods.

Hell thanks.
I dont know what you think about me, but im not as stupid as you think.
Or u just think my problems are bigger than they are really. :D

[Only registered and activated users can see links. Click Here To Register...]

My first problem is at Buffing. Buffing works really great, but somewhy he tries to buff Grass-Walk-Flow and sometimes White Hawk summon , but its already buffed! If i debuff by right clicking and buffing my own he just goes to next buff and all works, for the next loops too, i think. So not a big problem.


My second problem is the Grass-Walk-Flow at the WALKSCRIPT [Only registered and activated users can see links. Click Here To Register...] , without started bot! On the way out of the town he starts the buff and then the agBot goes completly crazy, instead of following the right cordinates, he just goes crazy :P Because i cant use the skill i just use the horse, its a waste of money but it works :D (The Screen was about this problem, not about the first!!!) *to next post* [Only registered and activated users can see links. Click Here To Register...]

Only using 1 Attack Skill? No way, with my pure STR bower i need really long to kill a Earth Ghost(same level) because pure STR are just weaker than pure int , but with my ss nuker i will die really fast, because of the party/agress/giants* etc monsters, so there i would need a Castle Shield Attack Skill(only activate if theres a special mob*). But i dont want to talk about that more.
And it works with 2-3 Attack skills!


Here that you can reallize my WORKING script


AND MY NOT WORKING SCRIPT!

You must add "Inject","72CD","0104FD04000000" .
Not ""Inject","72CD","0104FD04000000" - LvL 18". So delete that "- LvL 18" and it will work.

Or, just recompile the script without adding grass walk, and add it to the agbot skill list and it should work, I had someone ask me and I fixed this same problem for him. Try it and let us know how it works out for you. And no, I don't think your stupid, I had problems in the past, and now I got everything down for now so I am just trying to make sure all your bases are covered.

And what version of AgBot are you using, please tell me it is this one

[Only registered and activated users can see links. Click Here To Register...]

These are just my settings within the bot, I just want to verify what version of the bot you are running.

The Bot uses the Skills, not the Walkscript. Tried it already with highPriority, different, but only if bot is started.

[Only registered and activated users can see links. Click Here To Register...]

I already said im not stupid as you think :D
joke

ps: my design rulez ^^

damn lolz@your clock

when ever i start SRO after i open nu connector and agbot i always get "Sorry. Cannot execute silkroad [error code 2]. pls help !!!

I have problem with the nuCunnector! I use nuC 70 and I start the loader then the nuC cannot connet to the server and it want to retry. + sro client doesn't start:(

Where is the problem ?

Use the nuConnecter 7.1
It just cant connect :P
Try it with the 7.1 more times.

I have with the 7.1 sometimes problems to connect to Silkroad and after some tries it works ;)

Good Luck!

Also, make sure your firewall settings are not stopping it, sometimes your firewall doesn't say anything but it does in fact stop some things without you being aware.

I'll try, can anybody give me a link about 7.1?

Now the problem that if I start sro from the Loader the little silkroad window pop up and it frezzes :(:S

[Only registered and activated users can see links. Click Here To Register...]

Yeah and in the nuConnector are these Connect fails or?

Antivir: Nothing found
ArcaVir: Nothing found
Avast: Nothing found
AVG: Nothing found
BitDefender: Nothing found
F-Prot: Nothing found
Norman: Nothing found
Rising: Nothing found
VirusBlokAda32: Nothing found
VirusBuster: Nothing found

[Only registered and activated users can see links. Click Here To Register...]
Scanned by [Only registered and activated users can see links. Click Here To Register...]

I did a Scan, because i uploaded on my self

I tried and it still cant connect and the little sro window are frezzes, the firewall doesnt block, so I'm confused:(
Maybe I do something wrong. I would thanks a lot if someody can link me a topic or something about setting up and start the sro with agbot!

A pic says more than thosand words. Show us please.

[Only registered and activated users can see links. Click Here To Register...]

DONT USE THE MEDIAPATCHER
~kthx

The loader works only if I'm not redirect, if it not redirected it works itfself. But if redirect the IP the nucunnector cant connect and sro frezzes, so my problmes about the "Redicert IP"!

Which ip do you use in the Loader?

Redirect ip: 127 0 0 1
port: 15778

in nunconnector config:
connect on IP: 121 128 133 27
connect port: 15779
from: 15578

After reading all the posts and making all attemps to deal with the bug, the problem still remains (continous buffs - grass walk flow and white hawk summon) emailed rev6. The dc is still there, im just waiting for the new release and try it for my self.

I hunted the whole night over with grasswalkflow (bot buff) and white hawksummon, at start i had the problem that he casts it again and again but after debuffing with right click the buff and buffed on own it worked, for the next loops too :)