Start agBot click on the "Config" button and activate "Loop after teleport" then he will start the walkscript again after the teleport, what else. You should have an working walkscript first too, of course. :cool:

It's not that good right now. It was better before without the walk script, now its just extremely slow and bad when killing monsters and picking up gold.I hope a better version comes out soon because I can hardly bot with it at all.

im using agbot 1.6.5v5 and I have the problem with store items, bot goes to the storage, he deposits items, but I still see them in the inventory, they occupy the slots and I can't move them, they disappear after the next teleport, any solution how to fix it?

I LOVE YOU AXE! I remember you having the same problem as me and i just read your post about how the bot is slow so i read through some of your other post and saw u fixed the playername thing by changing ur non-unicode language to english. Thats what i did and it worked!

Have u tried going back to 1.6.5v5? Cuz I have the same problem u have and this was the solution for me.

Sometimes you have that problem if the first 3 sites are full and the last 2 sites have empty slots. I'm not really sure about that, but he never use the last site and sometimes not the fourth site. Thats why you should do items that you always will have in your storage, like elements, tabs and other random stuff into the last 2 sites and let some empty slots on the first 3 sites. If he still dont put the items into the storage then, then you maybe didnt changed the "item select". Start agBot, click on the "Config" button and click there on "Item Select". There you can change what the bot will pickup(inventory) what he leave on the ground and so on. Standard is that he keep weapons and other items in your inventory....


greetz, fu2

The only one problem i have is very buggy walkscript... I'm using agbot about only 2 days, and today i had experience that after teleporting from hunting area walkscript works perfect, but it was only one time, because now i'm buying hp/mp and sending manual to hunting area... I set for agbot through task manager High priority, no use. Maybe in older version there's no buggy walkscript? And about killing speed, it's good for me

u have to click on Loop after Teleport in the config settings then the bot will continue on its own

Thanks, glad to see that it worked for you too! The OP really needs to put that in the sticky!!


Frankkko: Put this in the first post, "If the bot doesn't work for you at all, make sure your non-unicode language is in English."

I think that will solve some peoples problems, It worked for me and Dupree lol.

looks like i didnt understood loop... i tought that bot will go to place allways. but my dump bot only running around the town and after a while getting dc.
And why bot shows me that my storage is full? i didnt even putted there anything

Can someone help me with this problem My bot works fine the first time i use my walkscript after i reinstall agbot but then after it runs out of pots and returns to town it starts the walkscript as normal but when it goes to buy something i get dced and if i reinstall it it will work again can anyone tell me how to fix this problem without reinstalling it every time?

PLZ help.....why duz my bot buy infinite bolts and universal pills????????
can any1 help??
thx

there's a new agbot exe file v2.2.0.12.......

guys guys guys why you don't just make a script like Isro ^^ just fill in the coordinates and then your bot goes there
look how isro did it and do it the same ty :D

I tried that new exe with the newest package and the walkscript is still more buggy than the old version 1.6.5v5.

I am using again 1.6.5v5. If the developer would just use the old code for the walkscript from 1.6.5v5.... He isn't improving it in the newer versions how he say it.

well the developer did mention that he would be releasing a new version mainly coz of the loop bug this weekend......

I went back to the 1.6.5V6 and added the newer v2.2.0.12 agbot to it and seems to be working well...
From Testing it seems that part of problem with walkscript isn't totally the program but a variance that isn't constant with connection and that script and agbot are thinking faster than what the connection and SRO program can communicate, IE: before the character arrives at said local the script is already telling it to go someplace else and causing the walkscrip to hiccup and just run around confused.

Would suggest to programmer to apply a method of slowing down the walkscript that can be set depending on the persons computer performance and connection rate (at least in overly crowded area's such as the City where outside stimulus can cause the connection to lag a bit. )
Such as having the script stop at each click point and hold for say 5-8 seconds that would alow the slower connection to SRO to catch up with the agbot.

Updating
I took SRO and Agbot and placed it on one of my slower computers and choked the connection down some and confirmed what i had seen earlier, The programs began to act like two hyper active children trying to play together, sometimes the bot would tell the program to hit a target that was already dead and averaged 4 actions behind the SRO program, After adjusting the Graphics on the SRO program to the lower settings it seemed to work better together but still had some lag between programs because of the connection, also walkscript worked well with only one or two glitches in process..

Additional suggestion for programmers is to have bot do one step at a time on scripts, sometimes where walkpath crossed over itself it wanted to take a shortcut which caused problems ..

so wat version should i dl?

There should be a new version of agbot coming out this weekend with fixes to the walk script till then if you want to try it i would suggest using 1.6.5V6 or 1.6.5v5 what i did was just paste the v2.2.0.12 exe into the same folder as it was extracted and run it like that till the new version comes out this weekend

even the old version had a buggy loop system.
i would get stuck on something and monsters would attack me until my armor broke or until i ran out of pots >.<
the bot right now can't even get out of town (maybe that's a good thing for me =P). so i kinda just stopped using loop system

it doesn't work any more it says that there are inspections

When i start agbot then it crashes for a little, then works for few seconds and then again crashes and so on... how can i fix it?

Did u try to reinstal the bot ?

yeh but still getting the same problem...

Are u sure u folow the guide like u should do ?
Maybe u did something wrong ..

It don't work for me...

I launch nuConnector.exe, then i start agBot, and finaly, i start silkroad.exe, i click start and...
I have critical error.

U need to have te Loader from Testoterone .. :)
Here u can download it , i think its the latest version

[Only registered and activated users can see links. Click Here To Register...]

If u downloaded the file u wil have 3 file in the map u need to put them in ur silkroad folder .., making a copy of the loader and then u can open nuConnector.exe then Agbot and then u open the Loader not the silkroad.exe ;)

i realy hope it wil work for u

Anyone got this to work on Vista x64 yet?

Which Operating system are you using.. when runing mine in Vista i usually right click on the shortcuts i create on desktop Properties then go to the compatibility and have it run under xp sp2 compatible, still have crashes sometimes when ram is low but overall seems to run better.. also if in Vista make sure you do the same thing (right click)(Properties)(compatible) then select to run as administrator...

Hope that works for ya

AgBot dont work on ur vista ?

Huh, where exactly can I download Agbot v2.2.0.12 ?
I'm using 1.6.5v8 right now and my walkscript is buggy. My bot just keeps crashing into walls or runs in circles

Sure it works .. Im runing Vista 32 and works fine and my wife is runing 64 and runs fine.. although i do have the exe and nuconnectors set in the properties as run in compatibility mode for xp sp2 and run as administrator because it seems to run better... If you cant get it to run you might have to set the permissions in your firewall and such to have agbot accesss the net. you might check your firewall and or antivirus to make sure it gives the agbot and nuconnector permission to access the net and if it dosnt well then give it and should work :)

--- Merged Posts ( use Edit Button next time ) --- Regards, hussert

[Only registered and activated users can see links. Click Here To Register...]

Not sure if this will solve your problems, there is to be a new version out soon that he is trying to fix the walkscript problem, you can try and if it dosnt then watch your web news section in your agbot and it will list all new updates in there..

I got an issue with this bot, I have followed the instruction on the site like step by step:
open nuconnecter, open agbot, use loader to launch the game, but after all that, after loggin in the game, it still shows as playernamelvl1 etc... can anyone provide a solution to this problem?

I got xp and i followed the instructions exactly...

When I start my agbot there cames an error : run time error: '399'
Component 'comdlg32.ocx' or one of its dependencies not correctly registerd: a file is missing or invalid.

plz help me ^^

--- Merged Posts ( use Edit Button next time ) --- Regards, hussert

Never mind , srr i readet already on the first page ^^

guys this is the sollution for the verry bad script xD

u patched mediaconnector ?

--- Merged Posts ( use Edit Button next time ) --- Regards, hussert

Mediapatcher *

y istart my agbot canot see my chrater name and the lvl still1 any wan can fix for me ?? i try reintsall many times

I installed the Bot as sied in the manual on Page 1 !
And I can start the nuconnector and the Bot. But when I click start on Silkroad i get the "old" Silkroad ??????? error.


What am I doing wrong? Did I forgot something?

thanks in advance!