Frankkko i have 1 question....Is it psiible to chat with in game players using the chat feature on the bot? pls respond asap thxs

becuase for sme reason my bot goes slow when i open sro screen

I was going to say something rude when i read your post...

Just think, please... The guide you gave was THE FIRST SITE ive visited. I was even on irc channel through bot, they didnt know wheres the problem, too...

I see ...

well .. I dont know if you have already tried this ... but ... :rolleyes:

Try and reinstall Sro .... it solves most of the problems in most of the times ...

Hope it works because you did quit a good research on you problem there .... :)

This new version bot has very bad engine for killing mobs, ver 1.55 was better and more efficient than this one. ( almost better than isro bot)
He collect gold or even universal pills instead to kill mobs first, pls try to fix that or put option PICK FIRST, if has that option i apologize pls write post how to put it on/off TNX

Grats Frankkkoj on the mod :)


now we have SpriGgy and Frankkkoj , i will merg them and the resulte will be one little Sprikkkoj :D

Sprikkkoj pic
[Only registered and activated users can see links. Click Here To Register...]

" Frankkkoj " ...

btw , That " j " was dropped ... its " Frankko " now :p

But , nice Combining names ... Sprikkkoj .... xD

well how can i add that to my script and where i need to put that little text than??

I agree,
i tried to fix this by pushing "Protect on" in the script option,
if i get hit by multiple mobs it first picks up the gold from the kill even going over to other peoples loots, and as a wizard this results in death.
the last version that handled the mobs first and good 2 was 1.6.3v10.
i hope i dont have to go back several version for some good hours of botting..

do these requests and ideas get read by rev6 peepz?

hi, i have a problem with the bot. Apparently it runs perfectly fine, but i keep getting dc every 5-15 minutes of botting. it's been like this for the past couple of days. i was wondering if anyone have this same issue or know how to fix this problem. thnx

im starting to get mass "invalid target" error i tryed what was posted on the front and even made the bot have all monsters selected but it goes for a few seconds then suddenly starts doing the invalid target thing...everything is up to date everything is set up fine but yeah its getting annoying

Samarkand Pot buying script doesnt work..Also the loop is buggy here too..

hm its just me or what ^^ agbot targeting / killing rate is so slow
after he kill 1 mob he target 2nd and wait about 5-8 sec before attacking everytime same thing kill 1 mob wait 5-8sec kill 2nd anyone can help me fix this ? btw i'm Wizard so i only use Fire / Ice nuke

well its not really a big deal, but theres the item one, and the monster one, when you target a monster and its dead and you try to attack anyway it says 'invalid target' which is a normal sro thing to do. i think the bot just tries a couple times, its nothing major, wont slow you down too much :D

rest assured its not a config issue or any settings issue, thats just how it goes:cool:

EDIT: can anyone tell me why agbot just told me it doesnt recognize NPC "Blacksmith Agol"?

and i also got "Error (2)" when it goes to Mr. Agol the blacksmith. whats up with that?

I've tried using the templates that come with AgBot and I always get some kind of NPC error so I just make my own and it works fine. Once in awhile I'll get a "NPC invalid" error but that's because my bot gets stuck somewhere in town. All u have to do for that is move ur char to spawn point... stop/start script and it will work again. I just cant figure out how the "inject" scripts work because they never work for me.

As far as the "invalid target" goes...my bot works great. Grinds just as fast as Tbot. I've never messed with monster select config. I just leave that at default.

My setup for main char is:

SrProxy- default port 15778 (he never dcs TY RUMATA)
AgBot
Testosterone- port 15778

My setup for nub char is:

SrProxy- port 15774
Testosterone- port 15774

Now Im just wondering if anyone has figured out how to multi-bot yet. My nub is lvl 64 with almost 400k sp.....90 here I come

error
 

when i try to register the ocx files i get an error il add a picture of it if someone could help me i would appreciate it btw i use windows vista not sure if thats the problem

[Only registered and activated users can see links. Click Here To Register...]

Hello guys anyone can tell or help me how to fix it...when i copy the three (3) .OCX files then Run it says there LoadLibrary("C:windows\system32\---3 .ocx----")failed - The specified module could not be found.

Actually when I installed the "libraryfiles" then I go the C:windows\system32 folder no libraryfiles found there....is it a hidden file?

But when I run the nuconnector and agBot it is good but the problem again is when I Run the silkroad.exe until the gameguard then error....please help me....

This Problem has been fixed 100 Times here, u have to search it before u write a question.I dont want to search now, but i think u have to do this OCX Files in vista in Admin Modus, then it should

BTW THIS WEEKEND, A NEW AGBOT UPDATE!!!!

i have a problem...:
i play the NuConnector and the AgBot and play the SroClient and when i write the ID and PS the NuConnector will Exit...
how i correct this?

Try using SroProxy its a great tool to replace nuconnector made by tommeke227[i had problems with nuconnector before]....

yeah i have excactly the same problem i already tried to logg in without bot and than i don't have this issue.
can some1 plz help me and krimz.
i really wanna bot but i just can't cuze it get dc every 5 minutes :S

The answer is one post over you, first look then Write...

I tried to install this bot but when I tried installing the Library Files...my avast! anti virus found 2 or 3 (forgot) adware files hidden in the install. I had throughly scanned the file (using both virus total, virus chief, and avast!) but the files suddenly came out when installing. I don't know if that is a safe install because files should not be hidden like that.

So is it just a false alarm or is it really adware, because I know that some files, like the SRO Client, can be detected as a trojan even though it isn't just because it contacts a server. I would like to keep my computer safe lol.

And is it even necessary to have the library files? I was reading around and saw that you only install them if your having errors with the OCX files.

Thanks.

hi,im having a problem with the scipt
when i copy a scipt already made and i run it,the char doesnt move,and when i make one,when i click on the NPC and i have to put the "Store item in storage" its says no npc has been selected
any solution?
thx a lot

If u dont trust it...dont use it. We've only been using agbot bot for a few months now....OH NOES....we're all gonna get hacked :eek:

As for the OCX files.....I've helped several people setup AgBot and never had the need for them on Windows XP. Just the library files to prevent the bot from closing out right away when u start it.

Ok... Im having a big problem,i quess. AND if some1 else had this same problem on Vista i am too lazy to read all the 215 pages. So if any1 can help me i am very pleased!

It happens on the 1st stage when i try to register the .ocx files. I have ran as administrator but it doesnt matter :(

Here comes the error:

[Window Title]
RegSvr32

[Content]
The module "C:\Windows\system32\VbEclipse.ocx" failed to load.

Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files.

The specified module could not be found.
.

[OK]

Any ideas? :O

When u Download it from this Post (First Page) then it is Safe.


Did u Put The 3 OCX. Files into system32?

lol how u mean??
i just want an answer form my problem.

Did u Put The 3 OCX. Files into system32?[/QUOTE]


Yes , i have them all in system32.

registered them tappani?

As i said, the problem comes when i try to register them. When i go to cmd and use the command the site says, it gives me that error :X

hey the first time i used agbot it was working good
but the secont time i try it dont work like
i open nuconnector then it say listing for bot connection
it works
then it says listing for sro client
but it cant be found
i use the loader

Skill Delay Fix //_$_\\ Only Old Versions!!!
Thanks to TBone0072!

To fix the skill delay go to your C:\Program Files\Silkroad\data and open skill.txt

There you search for the skill that you are using. Like you're using elitepvpers-flame (example), go and search for elitepvpers-flame.

If u found it, then you need to change the numbers in the line as following;

After the first number which is the level of the the skill, change the next 5 numbers to 0.
Leave the next 6 numbers as they are and change the last number to 0. Do all your attack and imbue skills this way.

Example:


First you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,60000,15000,182,0,1,257,2,0,1


And after editing you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,0,0,182,0,1,257,2,0,0





hm....my Data folder is emty any idea how to fix the skill delay its realy enoying the bot target 1 mob and then wait 5-8sec to attack

Btw Frankko, i made it work with my old pc ((XP)) (which really ReallY REALLY sucks).

But this computer with Vista still has that same error :(

any solution?
thx

It wont show my character name on the bot. I use media patcher. I tried running regvac and reinstalling silkroad but it still has same error. I have tried looking in a lot of forums but havent found the answer. Can anyone help me fix this problem?

Use Srproxy instead of Nuconnecter ... works Better .

There is a Srproxy thread somewhere around here in e*pvp.

It could be that you are entering a wrong path for the file or either the file you are trying to register is not there even.

you said you got this Error :
C:\Windows\system32\VbEclipse.ocx

First , make sure you got the .ocx three file copied into that path ...

Second , that should be system32 ... no matter where system32 is .... system32 location differs from pc to another ... I know that you are using the same path you saw in the guide you followed ... but that guy could have his system32 in a different path than you.

If your problem is that it wont show you the selected npc then just put them manually after you finish scripting your loop. The codes for the Npcs are in Agbot Site > loop archives ... even the codes to each item is there ....

Just leave a remak on you script ... say like three lines of "Stop Bot" ... so you can remember where to put the lines for the npc latter ...

I presume you know how to edit your script using notepad ... ;)

Try the following ... ( any alone should work ) :

Re-install library files ...

Use Srproxy instead of Nuconnecter ...

Use Testosterone instead of patching with mediapatcher ( unpatch if you have already patched )

Hope it works with ya. ;)

.

Hey, anyone of you here tried using agbot to bot a warlock? I can't seem to use skills like toxin and blaze? Anyone knows how to solve?

@tappani, You ran CMD as an admin to?! :-)

hussert, I have all the 3 files in windows\system32.

And yes Frankko , i ran it as administrator and not as administrator but still the same message :X

And as i said - i could get it work perfectly with my old pc with XP but not with my Vista :( :'(

I just noticed that i could register the 2 OTHER FILES perfectly - but still this VbEclipse isnt working. Ill give you a ss about the error...