does agbot works with win7 , too , and is there a multi client which is workable with agbot ??

I randomly get scrolled back to city while autohunting with my wizard.
It happens only when i bot on my wiz, it scrolls me back to the city , it loads and then I get disconnected.
It never happened on my ch archer,Im using the same settings for both chars and I don't know whats wrong :<

good bot but ibot its better..

never loled so much before LOL ...
EVERY BOT IS DETECTABLE bzw. DETECTED!
but JM don t do anything against silk buyers... so buy a bit silk and you are safe!
but agbot has a little bit higher risk because you need to patch media.pk2 but not higher than ibot...

agbot is only for isro?

hab eine frage bei mir funkoniert alles auser der LOader kann mir da jemand weiterhelfen????

can i run multiclient with agbot?

I can't open my silkroad without AGBOT now... it say : The server is undergoing inspection or updates. Connect to [Only registered and activated users can see links. Click Here To Register...] for more informations.

Hmm i can connect normally, are you using patched media.pk2 and sure that ip is right in patcher?

the loop is perfect, my only problem is when the char in hunting area his casting teleport back in the town again??

my script!

"exit town","hotan","west"
"-210","73","0"
"-225","16","0"
"-250","-51","0"
"-236","-102","0"
"-189","-179","0"
"-172","-243","0"
"-174","-290","0"
"-187","-326","0"
"-228","-322","0"
"-277","-319","0"
"-298","-344","0"
"-295","-392","0"
"-299","-451","0"
"-324","-491","0"
"-365","-500","0"
"-406","-482","0"
"-430","-435","0"
"-435","-386","0"
"-462","-351","0"
"-484","-308","0"
"cmd","[stop walking]",""
"cmd","[add hunting]","-484;-308;60"
"cmd","[start bot]",""

Tell me your "return to town" settings

if you check the agbot console and the sro client, your character is on the spot, but agbot thinks you are outside area, and so teleports you back. adding a 3seconds delay (or more or less, you could try), somehow gives agbot and client more time to sync. and you will not get teleported back again.

well, my problem with agbot is that it seems having problems getting "unstuck". i would rate it abt <5% chance of successfully getting unstuck, and after which, the bot will just run around and does not do any hunting, but will eventually get back to hunting mobs. the bot recovery seems proportional to the amount of time the bot attempted to get itself unstuck.

wonder if agbot could either work on fixing the unstuck feature, or add a feature that if the bot is unable to attack a mob, ignore mob and move to search for another mob.

thanks.

I have a question, I have the script look like this:
una pregunta que hago mal en el script?
"exit town","jangan","west"
"6043","1147","0"
"6014","1086","0"
"5940","1065","0"
"5875","1069","0"
"5741","1051","0"
"5583","1059","0"
"5488","1000","0"
"5385","968","0"
"5315","979","0"
"5147","820","0"
"5128","722","0"
"5089","676","0"
"5081","622","0"
"4921","519","0"
"4878","482","0"
"4819","468","0"
"4840","380","0"
"4759","370","0"
"4493","265","0"
"4344","249","0"
"4270","279","0"
"Walk","(6127.2,1140.7,-0.6)",""
"Walk","(6088.7,1111.7,0.7)",""
"Walk","(6051.7,1095.6,3.8)",""
"Walk","(6033.3,1089.2,5.6)",""
"Walk","(6004.4,1073.7,7.4)",""
"Walk","(5966.6,1070.2,8.4)",""
"Walk","(5939.7,1064.1,7.9)",""
"Walk","(5919.7,1066.2,9.1)",""
"Walk","(5876.4,1067.7,8.1)",""
"Walk","(5842.6,1064.4,13)",""
"Walk","(5798.4,1057.1,19.2)",""
"Walk","(5791.5,1057.7,20.6)",""
"Walk","(5759.4,1053.3,26.1)",""
"Walk","(5729.4,1054.4,31)",""
"Walk","(5718.8,1053.7,32.6)",""
"Walk","(5701.1,1054.2,35.7)",""
"Walk","(5680.5,1052.3,39.4)",""
"Walk","(5667.6,1051.5,43.1)",""
"Walk","(5648.3,1051.1,46.9)",""
"Walk","(5631.7,1051.4,51.1)",""
"Walk","(5616.5,1049.1,53.1)",""
"Walk","(5591.9,1043.6,58.9)",""
"Walk","(5555.4,1038.7,62.9)",""
"Walk","(5537.9,1026.9,65.7)",""
"Walk","(5520.7,1016.4,68.9)",""
"Walk","(5473.9,997.8,68.9)",""
"Walk","(5460.1,985.9,68.2)",""
"Walk","(5429.9,975.9,68)",""
"Walk","(5394.2,965,66)",""
"Walk","(5411,970.6,67.5)",""
"Walk","(5373,959.8,65.3)",""
"Walk","(5359.5,955.5,66.8)",""
"Walk","(5341.1,946.3,67.3)",""
"Walk","(5325.6,936.4,67.7)",""
"Walk","(5310,929.4,68.9)",""
"Walk","(5291,918.6,69.2)",""
"Walk","(5269.7,903.6,69.1)",""
"Walk","(5259.8,892.9,70.4)",""
"Walk","(5241.6,880.4,70.9)",""
"Walk","(5214.6,861,70.8)",""
"Walk","(5190.1,843.2,70.9)",""
"Walk","(5175.1,825.5,70.9)",""
"Walk","(5162.5,808.6,72.3)",""
"Walk","(5152.4,784.7,74.5)",""
"Walk","(5145.1,766.8,76.4)",""
"Walk","(5132.1,739.5,77.9)",""
"Walk","(5126.2,714.3,75.7)",""
"Walk","(5106.5,684.3,75.6)",""
"Walk","(5101.4,677.4,76.9)",""
"Walk","(5102.7,665.1,78.3)",""
"Walk","(5074.4,603.6,62.3)",""
"Walk","(5059.9,605.1,60.1)",""
"Walk","(5070.1,610.7,62.6)",""
"Walk","(5044.5,586.1,58.9)",""
"Walk","(5023.1,569.5,57.3)",""
"Walk","(5006.9,551.8,57.9)",""
"Walk","(4982.8,547,57.9)",""
"Walk","(4955.9,530.5,60.3)",""
"Walk","(4927.4,503,64.7)",""
"Walk","(4900.3,477.5,69.9)",""
"Walk","(4874.8,460.5,74.3)",""
"Walk","(4851.9,438.5,79.7)",""
"Walk","(4839,425.3,84.9)",""
"Walk","(4797.2,395.8,90.9)",""
"Walk","(4796.2,402.2,89.1)",""
"cmd","[clear hunting]",""
"cmd","[stop walking]",""
"cmd","[add hunting]","4796;402;75"
"cmd","[delay]","3"
"cmd","[Start Bot]",""

Lo puse para que valla a los tigres, que hago mal ?, es la primera vez que uso scrip. llega a la puerta y toma un teleport a la ciudad devuelta .
Si me pudieran dar un scrip como para ver como usar el script y para que no se tome el teleport, que siga el camino que le puse.
y cuando me maten o se me rompa algo que hay si se tiene que tomar el teleport, que se vuelva a ejecutar el scrip,
Si me ayudaran les estaria muy agradecido, hablo en español, pero uso el traductor.


I put a fence for the tigers, I'm doing wrong? Is the first time I use script. comes to the door and take a teleport back to town.
If you could give me a script to see how to use the scrip and not to take the teleport, follow the path that I gave.
and when they kill me or I break something there if you have to take the teleport, which run the scrip,
If you help me I would be very grateful, I speak Spanish, but use the translator.

agbot autorelog failed ,agbot cant kill sro client when disconnect, any solution on this...pardon my bad english.