it's up to you, you activate smurfit on any window you want to use the hacks, for example fly/jump/zoom/wall-hack, not just target id. EP remote/iheal/ibuff is not affected by that because its specificly using EP window name.

once you change the timer setting, untick ibuff and tick it again, that will reset the timer to the new value.

sorry, I still have no idea why it won't work for autoheal, btw have you checked your custom_settings.ini you got from mhs retriever and try it using mhs bot ? just to make sure if the hp mp maxmp maxhp offsets are correct.

or try it with smurfit's iPot,tick the []tanker in iPot, get hurt and see if pot usage will be triggered, remember to set pot hp/mp hotkey and hp tolerance, set it to 99% to be quick, just to test if it's working or not

hmm, you are right my friend, my autopot doesn't work, the current offsets I am using i've calculated using the method u've metioned where i find out the difference between default indo and my custom offsets for hp. my custom offsets for my game version is:
HP_OffSet=1104
MaxHP_OffSet=1144
MP_OffSet=1108
MaxMP_OffSet=1148

sorry, I forgot, with MHS retriever you got your own HP MP HPMAX MPMAX offsets already, no need to do any calculation, they are already for your version. try using that raw.

btw how about the other hacks like jumphack/fly/zoom, do they work ?

jumphack, fly and zoom all work.
Only have some problems setting up the buff and follow functions.
my ep only buffs herself, and the follow function only works sometimes for some unknown reason.
In the help you set that follow must be activated manually in the GUI, what you mean by that?
(and whats the dispelkey?)

Are there any known complications using double clients and MHS-bot?(1ep with this bot and 1wr with MHS-bot)

If you don't mind, could you check for faults in my ini? :)
(this offsets are for MY-EN)

[Settings]
Window Name1=Element Client
Window Name2=EPWINDOW
Window Name3=WRWINDOW
Window Name4=Element Client4
Window Name5=Element Client5
AutoWinActivateIfSwitched=ON
Base Address=9672940
Fly Hotkey={F8}
Jump Hotkey={F11}
CommandFollow_to_this_window=EPWINDOW
Char ID to be Followed=000**7D0
BuffKey={F5}
HealKey=6
RegenKey=5
HealAreaKey=1
DispelKey={F4}

[CharID]
Window Name1 Char ID=
Window Name2 Char ID=000**740
Window Name3 Char ID=000**7D0
Window Name4 Char ID=
Window Name5 Char ID=

[Offsets]
Fly Offset=1600
Jump Offset=2844
Zoom Offset=2062
Target Offset=2604
HP Offset=1108
MaxHP Offset=1156
MP Offset=1112
MaxMP Offset=1160

[RapidKeySend]
Key1=6
Delay1=50
SendKey1_to_this_window=EPWINDOW
Key2=
Delay2=50
SendKey2_to_this_window=WRWINDOW
Key3=
Delay3=50
SendKey3_to_this_window=EPWINDOW
Key4=
Delay4=50
SendKey4_to_this_window=EPWINDOW
Key5=
Delay5=50
SendKey5_to_this_window=EPWINDOW

[iNurse]
EP Window Name=EPWINDOW
HP Perc Tolerance=70
iNurse HealKey=6
BuffTimer=12

[GuiConfig EPRC]
iNurseWin1=0
iNurseWin2=1
iNurseWin3=1
iNurseWin4=0
iNurseWin5=0
iBuffWin1=0
iBuffWin2=1
iBuffWin3=1
iBuffWin4=0
iBuffWin5=0
iBuffDelay_InMinutes=20
iBuffKey={F5}

[GuiConfig iPot]
iPotHP Key={F2}
iPotMP Key={F1}
iPotHP Tolerance=50
iPotMP Tolerance=50
iPotHP1=0
iPotHP2=0
iPotHP3=0
iPotHP4=0
iPotHP5=0
iPotMP1=0
iPotMP2=0
iPotMP3=0
iPotMP4=0
iPotMP5=0

(i made some safety changes due to smart GM's =p)

I mean the ifollow doesn't have a hotkey, so you have to tick it directly on the gui to use it, and ibuff+ifollow also don't have hotkeys. Dispelkey is the keyboard key you use for EP's skill to dispel negative buff.

so far I never encounter any complications using 3 clients botting at the same time using either MHS or zevorc's bot, and using SmurfIT for EP, running four clients with EP in total.

your settings look good as long as you have set the EP's skill keys according to the ini file or vice versa.

EP has 1 minute delay before buffing the next char, just wait one minute and your other char will be buffed.

for the follow command, you have to revisit your ep window once if that ever happened and get back to main char, also happened when your chars changing map, revisit and it'll work again. I think it's because the game is not using standard control as 'control' used in window. I can make it always works though, using different method but it'll unfreeze the EP window and that will use too much resources like if the EP window is active so I use this method, not a big deal you can reswitch quickly by using ctrl-1/ctrl-2....5

Thx for the quick response.

A very clear answer thanks :)
I will try the unfreezing/following tomorrow and let you know the result.
EP skills ingame are allright. (just to know, are the keys switchable in the .ini file? (changing {F4} into {F5} for example))

About the buffing, I suppose if I would try to test it with a one minute interval, it wont work cause it will always cast the buffs over the first char due to the build-in one minute interval between buffs?

Furthermore I wish you a good night :o)
Hope i can master that programminglanguage after my exams....

thanks, it's morning already in here ^^

you can change the keys in smurfit.ini file, that's why I put them in there. Only some keys are not, like alt-w to command follow, alt-a to command heal etc, but the heal itself or the regen, dispel etc can be customized according to those you use in the game.

oh btw you use {F8} key in your setting for activating fly hack, just make sure you did not use that key in the game, no harm though, only it will execute something else if you did use it.

if you set 1 minute interval for testing then before the EP begins to cast buff on the other char, the iBuff timer is already reset, so only the first char will get buffed. Need at least 3 minutes for 2 chars.


goodluck with the exams ^_^ , you can't use bot for that lol.

the sever i played on just patched to v26 my-en, but now it doesn't work. i got some help on the mhs offset retriever, and now it works. i've used it to get the correct offsets which makes mhs bot work, but when i entered them in the smurfit.ini it still doesn't work. now target is always 000000000. nothing works except the rapidkeys.

a working mhs bot contains one key offset, it's the [target offset] , do the math like yesterday will give you all offsets needed.

while for HP MP HPMAX MPMAX you only need to copy paste directly from that working custom offsets.ini

yep, i used that method from yesterday but it didn't work, and also for the base address, i just copy and paste to smurfit.ini right?

yea, only need to copy paste for base address.

Yep, hmm, tried with fresh re-extracted smurfit, seems it doesn't want to work lol. Maybe you can spot my mistake if any.
my MHS custom_offsets.ini:

[Perfect_World_Base_Address_In_Decimal]
Application_Title=Element Client
Base_Address=9598540
[Custom_32_Offsets_In_Decimal]
Target_OffSet=2584
MaxMP_OffSet=1148
MaxHP_OffSet=1144
MP_OffSet=1108
HP_OffSet=1104

Smurfit.ini:

Base_Address=9598540

[Offsets]
Fly Offset=1580
Jump Offset=2824
Zoom Offset=2042
Target Offset=2584
HP Offset=1104
MaxHP Offset=1144
MP Offset=1108
MaxMP Offset=1148

your offsets seem to be correct, only maxhp and maxmp offsets might be wrong, try using this setting:
Base_Address=9598540
Fly Offset=1580
Jump Offset=2824
Zoom Offset=2042
Target Offset=2584
HP Offset=1104
MaxHP Offset=1152
MP Offset=1108
MaxMP Offset=1156

Hmm, still 0000000 as target... grr, no idea whats wrong

My only problem right now, is that I don't know how to find the base address hex number.... I have the base address that MHS retriever snagged. But how would I find it in Hex? for the Wallhack...

open you mhs bot, around the bottom area it says base hex address, copy that into the wall hack (don't include the 0x).

Thank you Chaos.

np, good luck, by the way if u r on my-en let me know, my wont work lol

you can use windows' calculator for converting dec<>hex.

btw, are you playing on my en server ? coz the offsets and base address there are different than those you gave me.

these are my MY EN settings, v26 :
Base Address=9672940
Fly Offset=1600
Jump Offset=2844
Zoom Offset=2062
Target Offset=2604

try those settings first, if those are correct I'll try to find the offsets for hp mp maxmp maxhp coz I tried on my en server when smurfit was still v1.4.x before needing those offsets.

btw you said you ran MHS, so how was the earlier settings you gave me when you used them on MHS Bot? it should show the correct value for hp mp if the offsets are correct in MHS.

yep, i patched to version2.6 my-en then i installed my private sever patch, i just tried those you posted, they didn't work either, i think tried them before.

the earlier setttings which i gave u were from mhs bot and yes on the bot, the autopot works, everything works fine on the bot but i've copied that hp,mp,maxhp,maxmp offsets to my smurfit.ini just to test it, still didnt work.

maybe my private sever is different offsets, since i run through a launcher.

I see, sorry can't help you much with the prob because if it works with MHS then it should work on smurfit, but it doesn't for unknown reason.

Seems strange Chaos :)
I'm using MY-EN (no private server) and my offsets are correct (same as smurfin gave you)

[Offsets]
Fly Offset=1600
Jump Offset=2844
Zoom Offset=2062
Target Offset=2604
HP Offset=1108
MaxHP Offset=1156
MP Offset=1112
MaxMP Offset=1160

*Edit* It seems you don't have the MY-EN offsets needed...

smurfin,
i will go test the buff/follow in my break ^^

*Tested*
Everything seems to work fine now, great job programming ;-)
Only found complication is that I can't set my mob list on MHS if SmurfIT is activated, but thats only a minor problem.
By the way, is there some sort of height-death protection? Or is there a possibility it could be made? (a certain heightdifference between ep and the followed char)

Keep up the good work :o)

glad you managed to get it working. For the mhs hotkey not working that's because you run smurfit first before mhs, and the hotkey for f11 is already taken by smurfit. You can change smurfit's hotkey for jumphack from F11 to other key from the ini file.

there is no height-death protection, if you tick the ifollow then EP is safer because EP will always follow you, this will minimize the chance of EP lowering height for healing if the distance to your main char is further than heal range, unless the terrains elevate randomly.

I guess it's not possible to make macro to fly up unless EP window is activated and become the active window but that's kinda defeat the purpose since you can do that manually if it must be the active window, I've tried sending space keypress to pw client window and it won't fly up if it's not an active window, it actually sending when I test it in chat window, but it just won't trigger the char to fly up.

Hi im new in Perfect world forum @ epvp, normally i was in other epvp forums ^^
humm, the SmurfIT v1.6.2 looks nice
and in readme wallhack.txt:
2. Run PWGTMv1.91.exe

where do i get it ?^^

and... i know how to get the base address... but at first, i have international perfect world, game client version 60... anyone knows the base address for this ? otherwise ill have to find out ^^
thx =)

oh, must be the private sever then, by the way your base offset:
Base Address=9672940?

found the first thing^^ i was blind or sth...^^

anyone knows base address? :) thx

yes, thats my base adress
Base Address=9672940

@smurfin
is there a possibility to get the *.au3 file for learning purpose?

0094CDCC is my one, could that be?^^

yours seems more like an ID
no expert in this tho, but i would say its your chars ID ^^

@Pekken
you should use MHS source code or other's source code to start learning autoit, because I've been scripting with autoit for only five weeks, my source might contain many redundant lines, noob logics and not a good one to begin with

or if you want, you can use my renameIT or autokeys source just to get a glimpse of autoit, those are my very first tryouts of autoit and now become Smurf IT. The links are here :
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
not a very educating source but it can cover basic things like creating GUI manually or how to use .ini file, and it's created by a newbie so should not be too hard to understand ^^

also remember to use koda form designer for creating the GUI if you want to start a project. I'm now trying to convert my smurfit gui with it, so adding things later will be easier. Should use koda from the beginning, now there are too many things to recreate and need adjustments.

@Katze123:
that could be a base address, it's in hex, if using it for KaZpa's wallhack you need to type only the 94CDCC without the 00.
convert it to dec using windows calculator if you need to use it with MHS, smurfit, zevorc bot, etc, some need it in dec.

thanks Smurfin :)

thanks :)
ill try to get the bot working now^^ ty

oh my god, smurfin, it works now hahaha. it just randomly started working with the offsets from the mhs retreiver. haha, so happy, still a big buggy, some i press ifollow it doesnt work unless i manually heal when my char is under 80 per cent, then it will work.

lol finally you got it working ^^

you need to revisit ep window once in a while when it lost focus for control then go back to your main and it will work again, you can use ctrl 1 - ctrl 5 to switch quickly.

the iFollow doesnt work properly for the 800x600 resolution :)
Can you pls make an adjusted version?

Thx in advance

I have tested all resolution in the list, and I just tried 800x600 and it works ok, maybe you use custom res ? try pressing alt-w in the ep window to test if right click is at the right position.

Only my smalest resolution works fine.
But its ok like this :) thanks for all the help

Petunjuk
 

om smurf minta petunjuknya dalam bahasa indo plz

yang nggak ngerti dimananya, tu default-nya udah settingan PW Indo kok harusnya langsung jalan.

smurfin bisa minta bantuan gk?
ini kan aku make program smurIT vers. 1.6.2.., aku dah aktipin flyhack ama jumphack tapi kok tetep gk ada perubahan apa yg salahx??
gitu juga klo wallhack.
tolong dong bantu