apa sih ini kgk jelas maling teriak maling ......

lalu klo yg lain leecher situ apah kacung ? copas aja bangga

The real towalker.com has no problem, users who paid can get verifed as usual.

I guess there is a problem with the server hosting that runs vpnbot crack server.
The modifications made to L2Walker.exe and L2Walker.dll in vpnbot package did not
crack anything it just redirect connections that usually goes to vip1.towalker.com
to vpnbot crack server instead. Then that crack server sent verified packet to our PC.

Either they have bad network traffic or it's just bad server hosting itself I'm not sure.

I really want to know how they make verified packet.
Why don't just make that happen on our side and not from a remote server?

i try your method as well enrevealer,but still doesn't work either,now the problem is even IG cannot verify,if the IG(InGame) verify,i can use tunnelling program and fix the right hex.before i find out the hex is changes,i don't know who change it,either towalker or our L2 server,but it works for a while,i guess a couple hour.so,in this issue,can u find out whats the problem?thanx in advance unrevealer,you a good man,you try to solve our problem...salute to you once again.

time now is 4.04 AM +8 GMT,the walker is working again,i just try it,Verify OK....

plz use your brain kid, you got your ogg still working because you were dever diconected from the server. So just shut up your fvking mouth. Be respect with other's oppinion you damn kiddo.

ogg and ig up

my ig & oog work all the time till afternoon the server down
what i mean with working is i can login/logout/start new oog/ig with no verify fail
it just fail when towalker down at this afternoon
read this unreavealer's guide for using oog without wpe

if towalker is up u can login ur oog with just run exe file no need to set filter etc in wpe

makanya baca forum yg bener jgn asal ceplas ceplos
gw bilang cara cubec not working aja pada bawel, emang kalo di gw g bisa trus gw bilang bisa? namanya penipuan gan! kalo memang sukses ya gw bilang sukses
intinya mau make cara apapun sama aja g bisa orang masalahnya di towalker
mau ubah filter kek,ganti2 hex kek, tunneling kek, forward2 kek kalo masalahnya di server ya bisa apa
satu2nya jalan hanya nunggu towalkernya bener lg
gt aja kok repot
lu smua di sini jg leecher, gw jg leecher. so?
gw cm share cara si A not working dari percobaan gw. emg salah?
kalo mmg bagi kalian working ya sudah, knp harus flamming?
kekurangan lawan bacot ya di game? atau uda kebiasaan bacot? ckckck

Yeah it works again.

I still think the problem is with internet connection with vpnbot.com (it's server on port 6010, not the web page), if we can't connect to it we can't get verified info. just like that.

cubec, that little prog i made was for a few people who still get "strange" value (most people does not) in their packet which prevent them from entering the character.

but all of that can happen only after OOG get verified.
you already know how to "tune" that packet to the right value
but I happened to hate the inconvenience assigning WPE to every single OOG I run.
so I wrote a little loader which run OOG then patch them automatically.
but can only work if you know where it goes.

the problem differs for different countries.
is something other than protocol version (offset 3-6) changed in your server?
if so, it can be patched too.
I'll share source code in masm32 assembler if anyone is interested.

to Elastisland :if someone post something like a help / guide,when its not working on you doesn't mean who posting is a liar,it works but when you try in the wrong time,can u just say politely "damn,its not working on me..." is it so hard to be polite?be a good manner?

even if i try someone guide,and its doesn't work on me,i will ask politely how is it work....not accusing that guy is a LIAR....

so its all about manner....

@unrevealer

thats mean,if VPNbot server have a problem,its really out of our hand,is it?

@unreavealer : thats what i mean but these guys just too stubborn to understand that. they keep try to change hex in wpe's filter and hope for verify ok while u have better way to use oog
it is just we have to wait for the server fixed eventualy

and for those that dont like to wait then u should buy the legal walker which is $7 a month.

@cubec : maybe i tried ur way at the wrong time. but is that sesat word hurt u so bad? lol
if u r confident with ur way and other people say its good why would u consider my 1 word so badly that cause this long long long useless conversation. and i dont mean that u r a liar, i just said ur way not working, u can tell me from begining that i tried at the wrong time since u can see my posting time and ur way is working couple hours ago for wpe users (im not wpe user, im using unrevealers guide and it's OK all the time till something happen with towalker, i can login/start new oog,etc without verify fail)
so maybe u guys better consider to use unrevealers guide to use oog. thanks unrevealer ur guide really make everything simple n easy for oog.

Funny I don't even have to use that I just run vpnbot's L2Walker.exe and everything is fine while someone even have ME do it through TeamView but still can't get past this problem.

All fix/patch/change to any packet can apply only after verify ok.
And yes it's out of our hands if their server have *glitches*.
The problem's not on our side.

Even some ISP here are suck the connections to Taiwan/China
just didn't went through while other ISP had no problem at all.

Peace.

walker cant read ProtocolVersion from set.ini thats why some ppl use other programs like WPE to change the packet for ProtocolVersion to match the one their server use :D

thanx for your help unrevealer,i can see now what really happen.and today,right now,the High 5 Patch is on going in our server,hope everything is just fine...

@elatisland
psti lo anak clan sesame street ya ? abis sotoy bgt sih ckckck

^sok tau lu. macam peramal aja nebak2 clan. emang lu clan mana sih?
gw main di server mana aja ga tau lu. lu tuh yg sotoy.

sotoy apaan gw? itu server towalker yg masalah mau diapain jg percuma sampe servernya bener. dikasi tau malah nyolot.
pada demen banget bacotan ky anak tk aja ckckck.

wkwkwk emosi

Hi All, For this new OOG just change protocol version to 268. After tat can bot again...

On L2indo everything from stat to chat dialogue are normal again. I suspect the l2info.dat last time that we use was for H5 patch use, so that is what cause the error on l2indo OOG users...

14:54:28 »¶Ó*ʹÓÃÐÐÕߣ¬±¾¸¨ÖúÄ¿Ç°Ãâ·Ñ¡£Çë·ÃÎÊÍøÕ¾[Only registered and activated users can see links. Click Here To Register...]
14:54:29 ->Link LoginServer Fail

Is there any solution? I am following tips from unrevealed. Any information about set.ini configuration?

14:54:28 »¶Ó*ʹÓÃÐÐÕߣ¬±¾¸¨ÖúÄ¿Ç°Ãâ·Ñ¡£Çë·ÃÎÊÍøÕ¾[Only registered and activated users can see links. Click Here To Register...]
14:54:29 ->Link LoginServer Fail

Is there any solution? I am following tips from unrevealed. Any information about set.ini configuration?

nah login game server fail,maybe we must change something in wpe .flt >.<

If you are using WPE method, just change protocol version to 268. Filter stills the same. If you are using unrevealer method change its first line to 0000010C in L2WF_PAT.txt. I just made those changes and everything is working fine for me

mohon pencerahan utk bot update H5.....

tq all

problem solved,thx so much unrevealer

OOG still not work after change to 268 in taiwan. :rtfm:

True, i use unreaveler method and change the first line to to 0000010C. I get login game server fail too at first, but after a few times it works fine :)

plsss help me with bot OOG in lineage2 High Five........

it can't use script....... to teleport...pls help me someone who can.............

i'm sory my bad english...... pls pls pls pls

suddenly my oog cannot login char anymore, may i ask the right for right setting in set.ini and wpe filter? (001-005)

protocol 216
Search 0B 01 0E 0B 01
Modify 0B 01 0E D8 00

work for H5 indo

Please teach me, how to find new protocol version of Taiwan.

To find protocol version:

1. Go to L2 system folder and copy L2.bin and paste, rename its copy to L2.exe afterward.
2. Start->Run then browse for that L2.exe and append -L2ProtocolVersion then press Enter.

Like this: D:\Kamael\system\l2.exe -L2ProtocolVersion

IF somehow that number is wrong, you will have to use a sniffer to attach with
a clean client (runing legit, without bot) and look into its connection with
game server port 7777, the first packet will tell you.

0B 01 0E xx xx xx xx 09 07 54 56 .. .. .. ..

The four xx pairs is protocol version in reversed hex number.
For example, in my server "0B 01 00 00" is actually 0000010B
which converts to 267 in decimal radix.

By sniffer you can use WPE or socketsniff.

oog can work fine in all server,..
with specialis for indo server, like this, and folow step by step

1. [Only registered and activated users can see links. Click Here To Register...] for l2infob high five
2. [Only registered and activated users can see links. Click Here To Register...] l2walker oog
3. add map

step by.
1. extract l2walker oog and put all file into one folder,
2. open with notepad file set.ini and write like this
[LANGUAGE]
Language=enUS.lng
[DEFAULT]
CountryList=indo;
DefaultCountry=0
DefaultServer=-2
DefaultCharacter=-2
DefaultAccount=
DefaultPassWord=
[indo]
LoginServerIP =122.102.51.27
LoginServerPort =2106
ProtocolVersion =216
ServerList=[01]°Í³à;[02]ϯ¶û·¨ÌØ;

3. save set.ini
4. open l2walker and set indo server, manual host manual character and login
5. and tara... you can bot with normal walker oog
6. for all file in l2walker is fine, but for teleport any problem with name town

sorry for my bad english

Ths all,for this new OOG just change protocol version to 267 in Taiwan.
Now my OOG is wroking.

thx for sharing guys...but we still have problem with the teleport hunting ground name,it became something with number,and the script can pass thru it...anyone have an idea to fix it?will be very appreciated...thanx for unrevealer as well fort sharing alot of stuff to us..

using VPN bot for in 2.18d, was wondering if anyone knows how to make the skills show up in english instead of korean?
thanks anyone who can help

Just download L2InfoB from the link above and replace it.

Also you should visit [Only registered and activated users can see links. Click Here To Register...]
for deMev's high quality color map.

ah tyvm much appreciated

i cannot find the download link as most of the site is in russian, can you post a link for the maps please? =D

Revisi dikit lah ya...
 

===============================================

ServerList=[01]°Í³à;[02]ϯ¶û·¨ÌØ; -->> change with [01]Bartz;[02]Sieghardt;
jd g perlu manual lah yaou...:handsdown::mofo:

This is full color maps up to now, demev's taking a break.

[Only registered and activated users can see links. Click Here To Register...]

150MB

Anyone got disconnected randomly while using IG and OOG since H5? This happens to me.
eg: My Main char is Elemental Summoner. Being followed by an Elder dan a healer. Nah ONLY Elemental Summoner is disconnected; while the other 2 chars are fine.

Setting di host win xp:
127.0.0.1 localhost
127.0.0.1 l2auth.lineage2.co.id

Thanks for ur solutions