elitepvpers

elitepvpers (https://www.elitepvpers.com/forum/)
-   League of Legends Trading (https://www.elitepvpers.com/forum/league-legends-trading/)
-   -   [Bot] GIBot (https://www.elitepvpers.com/forum/league-legends-trading/2885545-bot-gibot.html)

cedricdu94 10/08/2013 17:53

gibot-v1.1.2-accountfix it's work when we have a lvl 10 and try to connect, but no work when we have just lvl up 10, no close LoL and switch account

BlackJack232 10/08/2013 18:20

What other software I can use for creating VM ? The VMware installer shows nothing but blank screen and it seems like I can't fix it...

valonialol 10/08/2013 18:35

Quote:

Originally Posted by cedricdu94 (Post 25324032)
gibot-v1.1.2-accountfix it's work when we have a lvl 10 and try to connect, but no work when we have just lvl up 10, no close LoL and switch account

You are lucky i have 2 level 9 accounts!

Monrass 10/08/2013 18:50

Can you make this bot level only to 5 option?

li7aznboi228 10/08/2013 20:06

when bot hits level 3 it doesnt know how to click on the boost tab on the left.

Quote:

Originally Posted by valonialol (Post 25323182)
My cpu is running 100% aswell with 5 :/



Im installing tinyxp now to try how its working, but yeah i just have 8gb ram so i wont be able to host anymore than 5 vms :(



WMware Workstation, with a decent pc you should be able to run some bots :P

Quote:

Originally Posted by austinnnnn (Post 25321899)
Its consuming everything in my cpu too. Core 2 quad q9400 2.66Ghz @ 3.2 Ghz with an ssd.

Ok i give on up this.

I unistalled everything, I installed vmware again, i installed a MicroXp in every 5 vmware.

I open LoL in every VM to see if it open correctly, LoL was working on every vm, then i open LoL on every vm and create a custom game with the 5 vmwares, everything worked, the game loaded faster and i was in game.

Then with the bot, the game takes like 5 minutes to load, and when its about to reach 99%/100% the game closes on every vmware.

Im getting frustrated and i cant find whats going on.

i dont think its the VM ware's that causes the CPU usage i think it is the macro because my cpu usage stays at 20-30% with all the vm wares until i get into game it jumps to 60-70. once the bot starts moving around thats when it jumps to 100%

valonialol 10/08/2013 20:47

Quote:

Originally Posted by li7aznboi228 (Post 25326522)
when bot hits level 3 it doesnt know how to click on the boost tab on the left.

i dont think its the VM ware's that causes the CPU usage i think it is the macro because my cpu usage stays at 20-30% with all the vm wares until i get into game it jumps to 60-70. once the bot starts moving around thats when it jumps to 100%

It should load, but the shop is always so slow to load all pictures, thats the current problem with the xp boost code :/

About the cpu issue, i dont think the bot takes alot of cpu, ive ran my bot with the taskmaster up and it doesnt use much at all there :o

And the cpu for the bot going up before the game starts, becuse its a loop that looping without a sleep, so we can get the exact time when the game start, I will fix it in the next version.

li7aznboi228 10/08/2013 20:51

Quote:

Originally Posted by valonialol (Post 25327420)
It should load, but the shop is always so slow to load all pictures, thats the current problem with the xp boost code :/

About the cpu issue, i dont think the bot takes alot of cpu, ive ran my bot with the taskmaster up and it doesnt use much at all there :o

well for me when the host bot is moving around the map to take the control points my cpu usages is caped out @ 100% and as soon as it goes back to spawn and just sits there and moves a little bit it drops down to 90% usage. i opened up my task manager it eats 50% when it moves around just that 1 client. all the others use like 15-18%. might be the game but idk.

austinnnnn 10/08/2013 21:18

so i guess there isnt a solution for me..

valonialol 10/08/2013 21:26

Quote:

Originally Posted by austinnnnn (Post 25328030)
so i guess there isnt a solution for me..

I will look into the loading screen code soon, im testing running vm with 512 ram and 1 core and its accually working really good.

Quote:

Originally Posted by li7aznboi228 (Post 25327485)
well for me when the host bot is moving around the map to take the control points my cpu usages is caped out @ 100% and as soon as it goes back to spawn and just sits there and moves a little bit it drops down to 90% usage. i opened up my task manager it eats 50% when it moves around just that 1 client. all the others use like 15-18%. might be the game but idk.

I saw it, im fixing it right away, but im not sure what causing the cpu usage after the bot get back to base, becuse it shows that it takes 00 for me, and i have a svhost.exe that takes like 80% of the cpu, happen twice now, not sure whats that about

austinnnnn 10/08/2013 21:42

Quote:

Originally Posted by valonialol (Post 25328175)
I will look into the loading screen code soon, im testing running vm with 512 ram and 1 core and its accually working really good.



I saw it, im fixing it right away, but im not sure what causing the cpu usage after the bot get back to base, becuse it shows that it takes 00 for me, and i have a svhost.exe that takes like 80% of the cpu, happen twice now, not sure whats that about

with 512mb ram and 1 core the game closes :/

maybe its my cpu? but i dont think so..

cedricdu94 10/08/2013 21:45

try with more ram 512 it's low.

BlackJack232 10/08/2013 21:55

Valoni, is there any other VM creator which I can use ? VMWare won't work on my PC

sanxownage23 10/08/2013 21:56

the host randomly disconnects because i think it gets into an infinite loop where its looking for a colour it says on the top left corner "Colour:124562" <--- not exact value, but something like that. It keeps flashing the colour message and it disconnects from the match.

valonialol 10/08/2013 22:10

Quote:

Originally Posted by cedricdu94 (Post 25328510)
try with more ram 512 it's low.

I wont recommend it but it works :P

Quote:

Originally Posted by BlackJack232 (Post 25328672)
Valoni, is there any other VM creator which I can use ? VMWare won't work on my PC

OracleVM but ive never tested it, wmware workstation 10 is the best i think.

Quote:

Originally Posted by sanxownage23 (Post 25328688)
the host randomly disconnects because i think it gets into an infinite loop where its looking for a colour it says on the top left corner "Colour:124562" <--- not exact value, but something like that. It keeps flashing the colour message and it disconnects from the match.

Have you tried set all your hud scales to 100%?

austinnnnn 10/08/2013 22:15

512 mb ram is more than enough.. since some people run it with 400mb ram, with an ssd, of course, and im using it.

My cpu isnt the problem too, since i can run the 5 vmwares at the sime time, and open the LoL at the same time, and i've tried created a game with the vmw. with the first i created a custom and add a bot, and then i joined the 4 vmware on that game, and run it. and it worked fine, the 5 vmware running LoL with no problem. then with the bot opened, the loading screen takes a lot of more time to load, and when its about to finish, all the vm's close the game. (i think its the bot that crash, so the others close automatically too)

beybus 10/08/2013 22:37

Anyone can help to set the vmw machine to be optimal?
I mean the ram+cpu and stuff.

Running on i5 2500k, 8gb ram, 550ti, dont have ssd sadly

cedricdu94 10/08/2013 22:41

Without SSD it's hard, DD is very important for a virtual machine, try

eLFoLeY 10/08/2013 22:42

When i use the host exe it works perfectly and logs in , creates the game and stops ( to wait the other bots to enter the room ) , but when i start the first bot, it logs in with the same account as the host so it doesnt work, what can i do to solve this problem? :/
thanks :)

sanxownage23 10/08/2013 22:43

I have, and i have discovered that the cause of this problem is always that the HUD scale sometimes randomly become 97. When ever this happens, the bot is dysfunctional. Can you implement code that just sets the HUD scale to 100 by sending "esc" key and looking for "Restore defaults button" and then pressing it. I think it would solve all the problems and make your bot flawless! Thanks for the active support and development :D

valonialol 10/08/2013 23:10

Quote:

Originally Posted by austinnnnn (Post 25329044)
512 mb ram is more than enough.. since some people run it with 400mb ram, with an ssd, of course, and im using it.

My cpu isnt the problem too, since i can run the 5 vmwares at the sime time, and open the LoL at the same time, and i've tried created a game with the vmw. with the first i created a custom and add a bot, and then i joined the 4 vmware on that game, and run it. and it worked fine, the 5 vmware running LoL with no problem. then with the bot opened, the loading screen takes a lot of more time to load, and when its about to finish, all the vm's close the game. (i think its the bot that crash, so the others close automatically too)

Accually i found a way that you can run a vm with alot less ram, im testing it right now, im down to 256 ram and the bot still works fine, just the loading screen are abit slow :p
The only thing im worried about is the cpu, im doing some rework on all the loops so cpu usage wont go above 20% at any time, still testing it out.

Quote:

Originally Posted by eLFoLeY (Post 25329473)
When i use the host exe it works perfectly and logs in , creates the game and stops ( to wait the other bots to enter the room ) , but when i start the first bot, it logs in with the same account as the host so it doesnt work, what can i do to solve this problem? :/
thanks :)

Im not sure what wrong then, becuse after it login to an account it should set |1 after the account in accounts.txt and the next bot wont use it :/

Quote:

Originally Posted by sanxownage23 (Post 25329489)
I have, and i have discovered that the cause of this problem is always that the HUD scale sometimes randomly become 97. When ever this happens, the bot is dysfunctional. Can you implement code that just sets the HUD scale to 100 by sending "esc" key and looking for "Restore defaults button" and then pressing it. I think it would solve all the problems and make your bot flawless! Thanks for the active support and development :D

Yeah alot of ppl have written about the hud scale thing, but it feels kinda waste to make a code like that, if i only knew where the hud scale is stored i could have make the bot set the value of it, its not in the game.cfg :(

austinnnnn 10/08/2013 23:21

its just too strange that if i create the game manually and join all the vm on the game, the 5 bots load the game fast and enter on the game. and with the bot opened, the game takes a lot to load, and around 90% it start to get really slow, like 1 minuto to go from 91 to 92% and then it closes and say: the game has crashed, and then the reconnect button. but then the reconnect button dissapear because was the host that crashed..

cedricdu94 10/08/2013 23:22

I'm not sure i think it's here Riot Games\League of Legends\RADS\solutions\lol_game_client_sln\release s\0.0.0.248\deploy\DATA\menu\hud

valonialol 10/08/2013 23:22

Quote:

Originally Posted by austinnnnn (Post 25329984)
its just too strange that if i create the game manually and join all the vm on the game, the 5 bots load the game fast and enter on the game. and with the bot opened, the game takes a lot to load, and around 90% it start to get really slow, like 1 minuto to go from 91 to 92% and then it closes and say: the game has crashed, and then the reconnect button. but then the reconnect button dissapear because was the host that crashed..

Im fixing the cpu usage soon, i have the version ready but im testing it on my vms atm!

Quote:

Originally Posted by cedricdu94 (Post 25329999)
I'm not sure i think it's here Riot Games\League of Legends\RADS\solutions\lol_game_client_sln\release s\0.0.0.248\deploy\DATA\menu\hud

Then the folder would be changed all the time when the client updates :/

sanxownage23 10/08/2013 23:35

When there is a networking problem and my internet goes down, i think the bot stops working. Can you fix this problem please? Thanks again for all of your helpful replies. :)

Quote:

Originally Posted by valonialol (Post 25330002)
Im fixing the cpu usage soon, i have the version ready but im testing it on my vms atm!



Then the folder would be changed all the time when the client updates :/

so why don't you just change the line of code that reads the file every patch. LOL doesn't seem too hard on your part.

cedricdu94 10/08/2013 23:43

For me the must important it's fix buy boost, detection crash/disconnect..., switch account when lvl up 10, how many we need create account for REF, fix cpu usage.

valonialol 10/09/2013 00:09

Quote:

Originally Posted by cedricdu94 (Post 25330282)
For me the must important it's fix buy boost, detection crash/disconnect..., switch account when lvl up 10, how many we need create account for REF, fix cpu usage.

I dont know how to fix the xp boost thing, becuse if the shop loads slow their is not much i can do about it, maybe press home and open the shop again, if the time extends 30 sec it will go to home again and try it again.

I will make a check for the crash/disconnect thing when it happens to me.

Switching account on level 10 works for me, maybe its abit buggy but in the end, it works!

New accounts will only be create when the bot doesnt have any more accounts to login to.

CPU usage is fixed on the version that i just uploaded.

austinnnnn 10/09/2013 00:24

in the last version, i get the same error.. the load is too slow, and when its near 90/100% the games closes.

Although, if i create a custom game with one vmware, and join the game with the other 4 vm's (EXACTLY as the bot does), the game on all Vms load fast, and all the vms enter the game normaly.

So, it must be a bot error, consuming much ram/cpu :/

I dont think its ram, since im using 400mb, and without the bot it works, i already tried 512mb, and i got the same error, so i think its not a ram problem. maybe bot takes much cpu?

cedricdu94 10/09/2013 00:36

Quote:

Originally Posted by valonialol (Post 25330514)
I dont know how to fix the xp boost thing, becuse if the shop loads slow their is not much i can do about it, maybe press home and open the shop again, if the time extends 30 sec it will go to home again and try it again.

I will make a check for the crash/disconnect thing when it happens to me.

Switching account on level 10 works for me, maybe its abit buggy but in the end, it works!

New accounts will only be create when the bot doesnt have any more accounts to login to.

CPU usage is fixed on the version that i just uploaded.

For the shop maybe create a function sleep 15s or more for load shop

Switching account it's only work for me when i try connect a account lvl 10, but when i'm 9 to 10 he not switch account.

When i say " how many we need create account for REF " it's just for order REF, exemple a client need 100 ref, we need 20 create account per vm

It's just a idea, it's not important

valonialol 10/09/2013 00:54

Quote:

Originally Posted by cedricdu94 (Post 25330757)
For the shop maybe create a function sleep 15s or more for load shop

Switching account it's only work for me when i try connect a account lvl 10, but when i'm 9 to 10 he not switch account.

When i say " how many we need create account for REF " it's just for order REF, exemple a client need 100 ref, we need 20 create account per vm

It's just a idea, it's not important

There is a real program for creating like 200 accounts with just 1 click, you should try that, but i think i notice another bug now with the new version, my bot thinks that im level 10 after a 1 game :o

cedricdu94 10/09/2013 01:19

Quote:

Originally Posted by valonialol (Post 25330867)
There is a real program for creating like 200 accounts with just 1 click, you should try that, but i think i notice another bug now with the new version, my bot thinks that im level 10 after a 1 game :o

I tested your last version i dont have your issue after 1 game, but cpu usage is same for me i have 80-90% with I7 2600k, SSD , 8go ram, 1go per vm, i set 1 core per vm, i dont have tested without bot

valonialol 10/09/2013 01:26

Quote:

Originally Posted by cedricdu94 (Post 25331022)
I tested your last version i dont have your issue after 1 game, but cpu usage is same for me i have 80-90% with I7 2600k, i have no tested without bot

Im running 5 vms now on my i7, im on 80% when im ingame, otherwise its less than 30%

christerper1 10/09/2013 02:07

Do you have a premade/presetup MicroXP vmware file that you can upload for us? Thanks.

sanxownage23 10/09/2013 04:47

Line 503 (File "Z:\GiBot-V1.1\GiBOT_Player.exe"):

Error: The requested action with this object has failed.

donotwant 10/09/2013 05:00

Nice project!

I tested it with Windows XP Home Premium but the results were bad. I was just able to run 5 VM's at 768mb ram each (the games were crashing with 512mb ram; Setup: i5 2500k @ 3,9ghz, 8gb ram, no ssd). Back when LoLEtal was updated I remember using 8 VM's at something between 256 and 512mb ram while operating.

I will try to get a light version of xp running. Is there anything removeable from the LoL folder that may decrease the CPU usage? Hopefully I will get 5 VM's working at 512mb ram while being able to operate as usual. I'll leave Pandao Media Booster out and report with loading times. Right now its about 1-3 Minutes @ 1gb ram using a crappy version of xp, compared to 5-10 minutes using 512mb ram with many crashes (which is horrible compared to a lengths of 7-8minutes).

baka007 10/09/2013 06:28

help
 
Is running very fast at 6:15 minutes, need at least 7minutes to win xp. I'm using 5 vms and the host always stands still and takes effort to be away from the keyboard, any solution?

sanxownage23 10/09/2013 07:05

Quote:

Originally Posted by baka007 (Post 25332018)
Is running very fast at 6:15 minutes, need at least 7minutes to win xp. I'm using 5 vms and the host always stands still and takes effort to be away from the keyboard, any solution?

Make sure ur HUD is set to 100

kinqcastle 10/09/2013 07:26

Line 503 (File "Z:\GiBot-V1.1\GiBOT_Player.exe"):

Error: The requested action with this object has failed.

sanxownage23 10/09/2013 07:30

[Only registered and activated users can see links. Click Here To Register...]

Line 503 (File "Z:\GiBot-V1.1\GiBOT_Player.exe"):

Error: The requested action with this object has failed.

vampyr11 10/09/2013 09:57

Same error for me:
[Only registered and activated users can see links. Click Here To Register...]
Shows up after i started the host

vuze the one 10/09/2013 12:55

that means the server is offline


All times are GMT +2. The time now is 20:21.

Powered by vBulletin®
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.