elitepvpers

elitepvpers (https://www.elitepvpers.com/forum/)
-   S4 League Hacks, Bots, Cheats & Exploits (https://www.elitepvpers.com/forum/s4-league-hacks-bots-cheats-exploits/)
-   -   [zYan dev]x7Loader v4.0.4 (https://www.elitepvpers.com/forum/s4-league-hacks-bots-cheats-exploits/2017158-zyan-dev-x7loader-v4-0-4-a.html)

xIceShotx 01/28/2013 01:24

Quote:

Originally Posted by xXShadow19Xx (Post 20929498)
English
If you can't see the import/export window, you have to move the loader to your S4 League folder and start it from there.
If you have a problem with a dll file, download the ones it put here and extract them
1. to C:\Windows\System32
2. into your s4 League folder
there are more files than needed, 'cause I wasn't able to spot the needed ones. But better to much than to less. But replace the old files in every case, even when the new one is smaller than the old one.

this should fix these problems, but I'm still stuck with Xtrap, so I don't know if this will completely fix it;)

however, if someone the loader is working with could upload a Screen from his/her S4 Folder, I would bee very happy, 'cause I think the problem can be located there:cool:

sorry if my English is ugly, I'm still learning

Deutsch
Wenn ihr das Import/export Fenster nicht sehen könnt, verschiebt den Loader in euren S4 League Ordner und startet ihn von dort aus.
Wenn ihr ein Problem mit einem dll File habt, downloadet die, die ich angehängt habe und entpackt sie
1. In C:\Windows\System32
2. in euren S4 League Ordner
Es sind ein paar mehr als benötigt, da ich nicht mehr wusste, welche die benötigten waren, allerdings immer besser zu viel als zu wenig. Ersetzt die alten files aber in jedem Fall, auch wenn der alte file kleiner sein sollte als der neue.

Das sollte diese Probleme beheben, allerdings komme ich selbst nicht an Xtrap vorbei, also weiß ich nicht, ob das hier wirklich die Lösung aller probleme ist.;)

wie auch immer, wenn jemand dessen loader funktioniert einen Screen von seinem/ihrem S4 Ordner hochladen könnte wäre ich sehr froh, da ich vermute das das Problem dort seinen Ursprung hat.

If I was able to help you, please press thx.
Wenn ich dir Helfen konnte, drücke bitte thx.

[Only registered and activated users can see links. Click Here To Register...]

thanks, but this didnt solve anything qq, can you maby post the download you have? maby zyan tried updating it again, but made it worse qq, right when i reinstalled, because i installed it again like 3 hours after

xXShadow19Xx 01/28/2013 01:32

1 Attachment(s)
Ok, 'course I can, but according to your former Post, you have the problem with Xtrap, what won't bee fixed with these Methodes. Or if you don't have the problem with Xtrap, please upload a Screen of your problem, but I only can fix the dll and Im/export problem, sorry.

Be sure to extract it into your S4 Folder!

xDarkLegend 01/28/2013 01:37

After I click IMPORT NOTHING HAPPENS

If It worked with me I will make Tutorial video wish they don't delete the thread so I will send the link here IF IT WORKED xD

FranzFritz 01/28/2013 01:45

ich checks nicht, der 7xLoader IST im S4-Ordner,
aber dieses Import-Export Fenster erscheint einfach nicht

Ich starte beides als Admin, ich hab win 7 32 bit

xXShadow19Xx 01/28/2013 02:00

Hast auch alle Dll in C:\Windows\System32 und in den S4 Ordner gepackt? das wenn du das auch hast müsste es eigentlich gehen. Es kann höchstens sein, dass Win 32 bit andere dlls hat als 64 bit
me<---64 Bit
und hast du auch aktuelle Version vom Loader? (Innerhalb der letzten 24 Stunden sind ja glaube ich 3 updates erschienen O.O

xDarkLegend 01/28/2013 02:05

1 Attachment(s)
Quote:

Originally Posted by xXShadow19Xx (Post 20929686)
Ok, 'course I can, but according to your former Post, you have the problem with Xtrap, what won't bee fixed with these Methodes. Or if you don't have the problem with Xtrap, please upload a Screen of your problem, but I only can fix the dll and Im/export problem, sorry.

Be sure to extract it into your S4 Folder!

I downloaded it and all dll's added to the folder now I get this message -.- I ALREADY HAVE Visual C+++ 2012 x86

xDarkLegend 01/28/2013 02:06

Tell me there is 2013? lol lmao

xXShadow19Xx 01/28/2013 02:16

Sorry, but thats my fault, you have Win 7 32 bit or even vista/xp/Linux, don't you? I did't think this far when I postet The dll. But at least, I know now, that these dlls will only work o win 7 64 bit. Sorry for bothering you, you can delete the mvcp110.dll now, but best would be to delete every dll that wasn't there before (Or just delete the ones you get an eror from) I'll serch for the dlls that are compatible with 32 bit and vista, but I can't promise that I'll find them

Really Sorry.

xIceShotx 01/28/2013 02:19

Spoiler:
[Only registered and activated users can see links. Click Here To Register...]
Thats the problem :/. The problem now seemed to change. I had 2 msvcr files also, same name. I tried both, but both still gave an error. Any suggestions? qq

xDarkLegend 01/28/2013 02:27

Quote:

Originally Posted by xXShadow19Xx (Post 20929904)
Sorry, but thats my fault, you have Win 7 32 bit or even vista/xp/Linux, don't you? I did't think this far when I postet The dll. But at least, I know now, that these dlls will only work o win 7 64 bit. Sorry for bothering you, you can delete the mvcp110.dll now, but best would be to delete every dll that wasn't there before (Or just delete the ones you get an eror from) I'll serch for the dlls that are compatible with 32 bit and vista, but I can't promise that I'll find them

Really Sorry.

Win7 32 :D But NP xD I will try to delete the files:: xD

Removed all I added < After Import nothing happen omg-<>

I give up I think there's no way to use the hack lol--

dunn0wait 01/28/2013 02:35

Quote:

Originally Posted by xIceShotx (Post 20929921)
Spoiler:
[Only registered and activated users can see links. Click Here To Register...]
Thats the problem :/. The problem now seemed to change. I had 2 msvcr files also, same name. I tried both, but both still gave an error. Any suggestions? qq

Im where you are now. If you find a good .dll share it please!

xXShadow19Xx 01/28/2013 02:42

Ah, I totally forgot, try this side: [Only registered and activated users can see links. Click Here To Register...] just serch the dll you are missing, download the exe, run it. It will install a programme, but this way it much easier than extracting it. after the dll is installed, you can uninstall the programme again. This is also the way I got all my dlls 'cause my Windows had some data lost.

Kirito782 01/28/2013 02:53

Msvcp100.dll give me please

Jphdeluxe 01/28/2013 03:05

mein fehlerbericht

C:\Program Files\alaplaya\S4League\MSVCR110.dll ist entweder nicht für die Ausführung unter Windows vorgesehen oder enthält einen Fehler.Installieren Sie das Programm mit den Originalinstallationsmedien erneut, oder wenden Sie sich an den Systemadministrator oder Softwarelieferanten, um Unterstützung zu erhalten. WHAT?!

Dopee_Kidd 01/28/2013 03:07

I keep getting an xTrap error, anyone know any solutions to solve this?


All times are GMT +2. The time now is 09:53.

Powered by vBulletin®
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.