or just post the scriptvessel.CT that will work. mine up there is the one i tried cracking but no success. ne one that looked at it can tell me whats wrong?

SV stopped working today can some plz tell me wat i gota do to make it work again?

Welcom to use this Platform!
Logining......
Sorry, Username or Password Error! 2007-3-19 5:57:27

it seems maybe there is a 9net9 serverside check perhaps? i think the problem is with this code:
100037DD<----says "nop" already and u cannot replace it with a code that does nothing.

well...theres nothing wrong with urs, it doesnt work on my side either

i am a little Confused with this thing i did what u said in the diy and it wont work for me :S it gives me the same thing as others

Welcom to use this Platform!
Logining......
Sorry, Username or Password Error! 2007-3-19 6:31:45

can u just tell me what exactly to do coz i just see alot of guides and it makes stuff harder:S can some1 just give me something that will make stuff more clear thnx from advance

it says wrong password and id... but save id and change pass go in gray colour in version 4339 and if u cracked 0301 u wont see anything just wrong pass and id but its working in game :rolleyes:
just after u logged in and it said wrong pass and id hit exit... if it shuts down without problems then u cracked something wrong...
if it will say logging out... and wont turn off u have cracked it succesfully

when you get this msg :
Welcom to use this Platform!
Logining......
Sorry, Username or Password Error!

you can go to ur co screen and press f11 it should work
for some reason theres no msg to tell you to press f11 like last time
if that doesnt work you should try again or see what you did wrong
always double check

now for some reason when i start it now it just crashes

pm me i can help u if u like :rolleyes:
if anyone has problems pm me we will solve it ;)

Along with the lastest SV 0301 here is stand alone version try it.

Download link

[Only registered and activated users can see links. Click Here To Register...]


40F6E8 < Replace with no code
40F8C2 < Replace with no code
40FAA7 < Replace with no code
40FAAF < Replace with no code
40FAE4 < Replace with no code
40FAF0 < Replace with no code

Press Ctrl + Alt + S in Cheat Engine and find UnhookWindowsHookEx write down address on the left XXXXXXXX

Go to address XXXXXXXX from above and Replace with command "Ret 0004" [/b][/quote]
finally sorry for all the post but finally got it cracked. now do i do this step? cuz it works well with the trainer whats this for?

0301 is newer version 4339... if your 4339 is working dont bother with this

i followed the step of the cracks, until it shows error msg as below:

Logining......
Login Error:
Server no responsed or off-line or Version update!

anyone can help and know how to solve this?

I can't find something that says unhookwindowshookex, a little help?


<hr>Append on Mar 19 2007, 05:57<hr> nvm.... lol i didn't realize ctrl + f works.

is there anyway for make it work without the trainer? post it if possible.. becuz the trainer make the drwstn32.exe problem.
Anyway this one work.
thx

hey anastacia.. does the scriptvessel conect to their server only to verify the user and pass and then, when you are in, all the script is independent of their server?

Because if so it's not very hard to modify the code where the interogation with the server is made, where the acc is validate to make it step over this process. But if after login some data is download from their server, data necesarlly for the scriptvessel to work.. it's a little hard...

I ASK THIS BECAUSE A FRIEND OF MINE has loggend in friday in scriptvessel and he didn't reboot his computer since than, and te bot is forking perfect for him even now. If he get reboot he won't be able to login again.

I have another friend who is a good proigramer, he remove the date checker for me.. and I want to talk him to remove the server acc verifycation if it is posible. I want only to know if 9net9 server is used only to validate the acc or it is also need a direct conectiuon to it for scriptvessel toi work fine.

thank's and I wait a repply..

well it validates... but it gets error using pass and id :rolleyes: but trick is that u make your SV think that it was good pass and id so it will let u use it in game but in fact u r not logged in or what... u just tried pass and id which didnt work..

this means the the scriptvessel isn't crack corectly.. the perfect crack would be to modify the function that validate, and make him not to interogate the server.. just to "return true;". As you say know the crack is something like this:

SV interogate the server, the server send the response that the user isn't corect, but you modify the response as SV should think that the user is ok.

the good crack would be to stop the SV to interogate the server and make him always think the user it's ok.

I think the problem with the old version of SV that doesn't work anymore since 2 days agho is that 9net9 server doesn't send back any response and the SV show thta message that the server is down or it's a new version.. blablabla.

wel... u cant make server think that its correct until its correct :rolleyes: only solution would be to modify your SV that it wont connect to server and just run immediatly... thats just what mr.rattlz did... took of internet of his client and his version still works even if its 4337 and all cracked version using server veryfication stopped working

so, it's possible to do it..

My friend knows very good assembly, I hope he'll make it..

god luck with that :)

<hr>Append on Mar 19 2007, 13:32<hr> btw 200th posts :D

yow, i have an question..if i follow these steps correctly. does it works with conquer on this date??

thanks :D

in the memory viewer of cheat engine open after doin first steps anastasia tells ya ya hit control+alt+s and it opens dll list click the + sign next to user32 and scroll down till ya find unhookwindowshookex :)

mine was in ntdll :rolleyes: u had it in user 32?

I'll crazy uahua i'm one stupid i can't crack it huauhauha i try and show me at trainer that's "incorect version ..." huauhuah!

owned for me!

Edit
Now i think that it's ok.. but when i use the patch and write some password and id enter launch and do all! i press start at SV and the SV down! close the program!! some1 can help me?

Edit 2
well now i dont go try with cheat ergine huahua this program dont like me!
Anantasia can u help me with hex code's that i can change in hex32?? if some1 now too i'll be much happy! bb!

@alan77:
There are two version of SV on this thread. One is from unknown SV 4339 1802 which infect with virus and the other one is from bot2themax SV 4339 0301. Please try follow my guide from below link for crack stand alone SV 4339 0301 with your self.

[Only registered and activated users can see links. Click Here To Register...]

@bad4ever2005:
Yah, The completely crack is base on your comment but I just make easy step to other can do it and persuad other to trace assembly code for gain experience.

Due to new version had many checking and I can't encode data that they send back (change every time that request) so I can't make complete one just only check internet and call function validate.

Wish you and your friend share knowledge on assembly and how to cracking it among us at here.

@willianaxlrose:
I think that unhook in user32.dll is the problem if u change it. It's will affect when u right click to popup window.

SV crash after you click start. Try disable drwatson dump debug. or waiting I try other way to crack older version.

Followed ur steps as below:

40F6E8 < Replace with no code
40F8C2 < Replace with no code
40FAA7 < Replace with no code
40FAAF < Replace with no code
40FAE4 < Replace with no code
40FAF0 < Replace with no code

Press Ctrl + Alt + S in Cheat Engine and find UnhookWindowsHookEx write down address on the left "77D50DF3"

Go to address "77D50DF3" from above and Replace with command "Ret 0004"

hi anantasia, i did followed everything in ur steps on the sv 4339 301, still can't work, the sv only show " logining......" forever....

How i disable drwatson debug? i dont remember!

@alan77:
There is no message after u crack it with my step. You must try press F11 on your conquer to test it work or not.

@willianaxlrose:
I have stand alone version for SV 4339 2302 try below,

Download Link for SV 4339 on 23 Feb,
[Only registered and activated users can see links. Click Here To Register...]

40F6F8 < -- Replace with no code
40F8D2 < -- Replace with no code
40FABF < -- Replace with no code
40FAF4 < -- Replace with no code
40FB00 < -- Replace with no code
40FD34 < -- Replace with no code
40FD3B < -- Replace with no code
100037dc <- Replace with no code
100037dd <- Replace with no code
10003843 <- Replace with no code
10003844 <- Replace with no code

hi anantasia,

after hours of searching cheatenginge in web and understand how it works i changed the things you wrote in your last post but how to save these changings?

I mean: is it changed immediatly and i do not have to save my changes?

Sorry for my bad english...but what is exactly to do after i replace all codes with "replace with code that do nothing"?

EDIT: i use Cheatengine 5.3...so should i klick file> "save dissasembled outpout"?
the he asks me for the region i want to save....so what next? save all? but
what is the first adress and what is the last?

Sorry i do never before something like this! ;-)

=( no anan this version dont work too!.. i cracked but now show me that the "server off or change version..." and i go send u a pm for u see one thing!

ok so at this time all SV is down (Server no responsed or off-line or Version update!), the version on this post is down too?

Atm i think that yes! but the ppl like anatasia working hard to fix the problem! just wait!

Same me =)

i do as u said i donno if i succeeded or not but the SV just makes an error and the send or dont send window comes what do u think the problem is

ok thx

I just tested this it works and has been dunno what you guys are doing wrong but if you follow his directions it will work.

original version have same problem

hi there, i cracked sv 4339 and it works fine for me atm. but i couldnt make a trainer for it. i worked on trainer for a while and i noticed that trainer doesnt change "Ret 0004" command.when i changed the codes in cheat engine i can see all the other changes except ret 0004 code. i am not a programmer so this may be a silly question. is it possible to xhange "ret 0004" code via hex editor permenantly? or how can i put it in trainer?

ok i got the v0301 but i dont know where yo ugo t find thos numbers i am a total noob at this stuff

i can't seem to find the unhookwindowex thing lol

@workaholicman:
I think you successful crack it with your self. Please read this post for about how to make trainer.

[Only registered and activated users can see links. Click Here To Register...]

@willianaxlrose:
My post #108 is SV publish on 23 Feb. You can download and do standalone SV trainer with my guide.

@esatwar:
Please try post#108 for SV4339-2302.

@CLIT:
If you refer to post#108. It's use for SV4339-2302 (publish on 23 Feb). Anyway if you don't familiar with my number please try tutorial or old guide to make trainer as link below.

[Only registered and activated users can see links. Click Here To Register...]

@r34p3rex:
after you press Ctrl+Alt+S it's will appear dialog window and press Ctrl+F to find unhook.