any1 here can give the config of camera n movement or buff config?
reading all this giving me good config for the bot but not the cam n movement..
any1 can teach me about it?

I improved my bot by using no movement, because you move without it a lot ^^

for camera turn use this:
mouse goto [center of your rappelz-screen]
right mouse click down
mouse goto [x: +200 y: +0]
right mouse click up

this means a turn of about 90 degree to the right side
just test some x values don't know if 200 works for all resolutions

my bot does not need movement any more, with movement there is a possibility that you leave the area, or that you get into an area without mobs.

instead I use

Tab
key 2 (chipping)
break 5 secs (so that the mob moves to your location)
key 1 (attack)
break 10 secs (for attacking)
key 9 (loot)
break 1 sec (looting)
key 9
break 1
key 9
break 1
[manual repeat of this code 3 times so that you attack 3 mobs in your current screen]
Heal
Camera turn
Loop inf times

this is my script, I recognized that my bot is still moving around, but much less than using movement in it.

Still, I am not able to implement some sort of buffing after 30 mins...

so I need for killing 3 mobs 57 secs,
for healing and turning camera around 3 secs,
makes one minute
i could implement buffing after one minute, but its too mana consuming and too ineffective

Good post, thank you Gremium.

Hi,here is the link [Only registered and activated users can see links. Click Here To Register...]
when i press insert ,or hold insert nothing happends

rite now i use it seem good.. but...
it seem dont wanna loop after 3 attack if i put infinite loop after the cam movement..
n it only loop the cam movement...

the cam movement very fast @@ i dizzy looking at it...
so i put 2 sec pause after cam movement it seem more nice...

sry for bad english

If you have any repeat/loopback commands before the infinite loop command then the infinite loop command will only repeat back to the last loop command.

got your winprofile, and i will check this today
[EDIT]

The Pictures down there show you the differences between your and my config,
and i have to say, with those changes your bot works, like you see in the texteditor

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

@abelknightroad:

@pravesh12: Are you using a USB or PS2 keyboard? I am using a USB keyboard myself on XP and I have my macro mapped to Keypress Number 1. When I press and hold the '1' button on my keyboard my script does not start, yet when that key is mapped to the gamepad button and the button is held on the joystick it works just fine. Not quite sure what is going on with that but I would be interested to know if you are using USB as well.

Hm is Number 1 not used by rappelz?

Not if you switch the controls back to the Epic V settings.

Hm sounds interesting, I'll try key 1, but should work fine, my keybord is a laptop keyboard, so it is PS2
[EDIT] Worked

Hi,its still not working i changed it like you said,i got a USB notepad tryed it with that dident work nothing happend,now im using ppjoy still doesent work....,and when i press start it does affect windows everything gets scrolled up,but in rappelz nothing happends.....

Hmm not sure what else to do then... GG shouldn't be blocking it because I'm still using it.. started it up just this morning again. You may want to consider checking out the Pinnacle tech support forums to see if any other users are reporting similar issues and see what they did to resolve the issue.

is this safe? no worries about getting banned?

bah your better off just gettign a g11 or g15 keyboard and using the macro Keys then going through all this

Yes, you could do that.. but how would you move the mouse then? And besides, this is free lol.

I believe that any macro program that automates any function is a bannable offence if you are not at the keyboard while using the macro. You would have to check the game's official rules to get more info on that.

In my case it is like this, I only use this bot to have no disadvantages against those people with too much free time ;)

That means, I use this bot to find valuable items, and make some more money

And for this I use a second account. Safety first :)

There are still some problems occuring, while using this bot:

-stops working when getting a partyinvite
-getting killed by pkler :D
-Not working when antivir notifier pops up -.-

Yeah I use this for the same reasons too.. to make money so I can get a nice pet like angel or wolf. As for your problems with the party invite, what I have done on my bot is create my own party that way other invites wont appear. As for getting PKed.. you gotta take the good with the bad unfortunately lol. I keep getting home to my bot PK'ed as well but I now have a good idea as to who is doing it to me and I will be dealing with that person soon enough. When I have some free time I will play with the macro some more to see if I can tweak it for optimum performance, especially for those pkers lol.

yeah, i am far away from optimum performance,

my bot uses three profiles,

Spot,
Spot & Cam
Complete ( + movement)

but none of them works good enough,

my complete moves too much around, i compressed those movements a bit by using a high cam angle, and a 5 sec break between chipping and attack.

Spot only, does not work, because the mobs spawn outside of your screen and you are screwed.

So, at least Spot & Cam works a bit, there is no (active) movement, just turning the cam after 3 mobs, and here also 5 secs break.
This profile still moves around, because the chipping range is a bit smaller than the tabbing range. Plus, some mobs have a slower movementspeed.
However, I loose 5 secs while waiting for the mob to arrive at my position.

Next, I will try and reduce the break in Spot & Cam to 1-2 secs for chipping,
Result should be an increased movement, but a faster killspeed

Hello all,

I already given Thanks to those who deserve :)

I would like to know if you had found a resolution for using multiple "loop/repeat" in a single script ?

I tryied to do something like that :

1st action repeated 3times (for example)
(Here is a loopx3 in the script)(*)
After 3times, a second action,
And a infinite loop, to repeat all the script.

My problem : The second loop (the inifinite one), only return to the first loop(*), not at the start of script ...

Apart this, this method succesfully worked for me, after a time of understanding

I hope u will understand me, even with my poor english :)

No solution yet, but if you read carefully,

insteadof a loop you might repeat your code manually if it is only 3 times...

Ok :(

Of course, i thought about it, and did it :p for healing myself every 3 mobs.
But i was trying to find a resolution for buff, every ~30min ...

Thanks for ur answer =)

Another question, can someone share some good spot for using Pinnacle ? (good : fast respawn, no mob[*], no aggressiv mobs, less as possible tree and rock etc...).

Atm, im using a reroll, and i (auto-)farmed 6/7 lvl at laksy. Immediatly on right, after south brigde. The best spot i found yet, mobs are lvl 13-18, but its not enough now ... :(

Thank you for ur answer grenium :)

Another option that I stumbled across over the weekend is just assign your buffs macro to a seperate key and then assign that key to a seperate button on the gamepad other than the one being used to attack. Now just hold down both buttons with tape, elastic, paperwieght.. whatever you got. Both scripts will run together and if you time it right the buffs will happen when they are supposed to and the attack script will keep going after.

Waouu :D

Exactly what i want !!!

@Night Dragon
Did not thought about it, nice one ;)

@groovie:
Laksy is the best choice, my bot did it like this:

1-20 Trainee Island
20-32 Don't know how you call it, but those Laipkas or whatever. (Where you harvest those crystals for quest)

My bot is 35 so i am here:
32- 44 Angels, 39-43 where the monsterdude is standing around, Nerdlock or whatever :D at this mountainside, there is an angel fastspot

Hmm, should be a nice spot, i'll try this night =), Thanks ;)

wait so this is a working bot for rappelz if you use a joystick? im kinda confused

Not sure what is confusing about it.. just read the first page all the instructions are there. Its basically a way to get macros working in the game so you can setup a 'dumb' bot of sorts.

Joystick is not necessary (cf. page 6, or earlier : PPjoy)

And this is not exactly a "bot", this is a macro software.

;)

can someone help me out:
im (trying) to write a simple bot in C#
using the Keyboardhotkey.dll from [Only registered and activated users can see links. Click Here To Register...]

I manged to make mouse movements
Get screen colors from X / Y
I just need a small example for when i press a button on form it wil send key (0x3B = F1)

plz help me out im a bit stuck right now

Something like this should do it:

yes night dragon but im a "dumb person"

No such thing as a dumb person.. just a slower learning curve lol. I'm sure you will get it eventually.. just gotta dig through the info.

ok i have everything set up as it should and all my keys r as knight said they should be tab, f1, etc. but when i press insert and button 1 nothing happens even when i hold them down. Also do ihave to configure anything via in game like do ihave to make it so when i press f1 it attacks?

The keys that you are calling upon need to be properly mapped in game. So if you are using F1 as the attack in Pinnacle then you need to make sure that the attack skill is mapped to F1 in game.

ok well i keep opening the macro and im on windows xp laptop and it stays open for liek 1 minute than i get the message saying "windows has encountered a problem with pennacle and needs to close" it just keeps doing that what should i do

Well if reinstalling the program does not help then you may need to consult with the Pinnacle tech support forum. Here is a link to their support:

[Only registered and activated users can see links. Click Here To Register...]

thank you im doing that now

Pinnacle work, but not with Rappelz window
 

Hey all...i can get Pinnacle to work with any windows, except Rappelz...

i.e. i hit tab in IE and it select different links in the web page.

Any ideas of what i could do wrong?