tryed and still same...it gives me that dotn start game, pls move your chars etc...

p.s. im using the stand alone version of 1.10 with cheat engine....

Im also using version 1.10 cracked thx to anantasia's hex edit method

After I patched with 4351 didnt worked anymore so i installed both patch 4347 and 4348 and then changed version.dat to 4351 and started working again

@anantasia
I also saw that message, fair game lol
and thx for this topic =D

i cant stank how crack sv? who can post here working sw plz

heitk can u pots me a link where to dl a xview hex editor(or something like that, it's a rar with no install) cus i got hex workshop and im not use to it, it's a lil wierd lol

@koila posting a cracked sv is illegal here read rules, u can post how to crack it....if u dont understand try to learn(no hard fealings)

Im also using version 1.10 cracked thx to anantasia's hex edit method

After I patched with 4351 didnt worked anymore so i installed both patch 4347 and 4348 and then changed version.dat to 4351 and started working again

@anantasia
I also saw that message, fair game lol
and thx for this topic =D [/b][/quote]
geez u guys are making things more difficult then they are ffs.

ONLY reason sv won't run on 4351 is new exe blocks injection ( duh! ) Which is also why cotobo won't run on it this has been posted 300 times...ALL ya need is to fix the exe so tobo and sv are allowed to inject into conquer and they work fine !!

Currently i am running 4351 and STILL using sv 1.10 and cotobo perfectly.

You guys need to stop being such noobs and read a little before posting 300 replies on here " i can't get my sv to work!!" ALl the things needed to make sv work on new patch are supplied on this forum and all this swappin out patches is just stupid lol and not needed.

when i use it for a tao it uses up all of the mana pots when i try to lvl it what should i do so it just dosnt waste my mana pots for example it does something like this.....zap....mana pot....zap....mana pot... until i have no mana pot Plz help

send me plz working sv on mail [Only registered and activated users can see links. Click Here To Register...]

geez u guys are making things more difficult then they are ffs.

ONLY reason sv won't run on 4351 is new exe blocks injection ( duh! ) Which is also why cotobo won't run on it this has been posted 300 times...ALL ya need is to fix the exe so tobo and sv are allowed to inject into conquer and they work fine !!

Currently i am running 4351 and STILL using sv 1.10 and cotobo perfectly.

You guys need to stop being such noobs and read a little before posting 300 replies on here " i can't get my sv to work!!" ALl the things needed to make sv work on new patch are supplied on this forum and all this swappin out patches is just stupid lol and not needed. [/b][/quote]
Im gald you have another way but the way I did it is not stupid and IS needed when you trust more downloads from CO site.
Btw, what's the difficulty on it? o.0

ya and not to mention that if you accidental acquire fraud dbs your're banned :?

</span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (anantasia)</td></tr><tr><td id='QUOTE'>Try repatch 4348 again.[/b][/quote]
I tried this. But it still produced the "server and client no response or offline" error.

</span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (hieitk)</td></tr><tr><td id='QUOTE'>After I patched with 4351 didnt worked anymore so i installed both patch 4347 and 4348 and then changed version.dat to 4351 and started working again[/b][/quote]
I also tried this. The error still exists.

geez u guys are making things more difficult then they are ffs.

ONLY reason sv won't run on 4351 is new exe blocks injection ( duh! ) Which is also why cotobo won't run on it this has been posted 300 times...ALL ya need is to fix the exe so tobo and sv are allowed to inject into conquer and they work fine !!

Currently i am running 4351 and STILL using sv 1.10 and cotobo perfectly.

You guys need to stop being such noobs and read a little before posting 300 replies on here " i can't get my sv to work!!" ALl the things needed to make sv work on new patch are supplied on this forum and all this swappin out patches is just stupid lol and not needed. [/b][/quote]
can you teach me how to unblock it?

Soo. Tw3ak or hieitk...may one of you give a step by step on how to use Sv..since the 4351 patch...what patch i shud have..how to make it not autopatch to 4351 (which blocks sv). and what SV version. I would appreicate it. I kinda need step by step..not sure how you get around it..would help..since a 4351 SV cracking guide has not come out.. :rolleyes:

thanks..

with love. :?

why cant post just cracked bot ?
;S

dont understand.. my sv have been working so long, then today it says:
Welcom to use SV Platform!
Logging......
Log in Error:
Server no responsed or off-line,Pls login later!

Pacth 4351 have new conquer.exe so to get the old one you need patch 4347

Do the same again but now use both 4347 and 4348 patches[/b][/quote]
Hi.

I reinstaled CO, and patched until 4348, changed the version.dat to 4351, but still not working.

I tried to patch back to 4348 no 3 other pcs, but stil giving me that error msg of 1 ... 2 ....

I'm using the same vessel 1.10, cracked using the stand alone guide from anantasia(thanks for that). I used the same on all pcs.

I need to crack again? Is TQ able to change anything on our scriptvessel.exe file?

Please i'm not been able to make vessel work again. Can u help me?

Thanks all!

they patched it up thats it...just try and make v1.15 work hex the code and try to fix up some things to awoid the slowdown and thats it.

Here to...after i try all...
Logging......
Log in Error:
Server no responsed or off-line,Pls login later!

anyone encountered any problem with SV 1.15 ?

Hi.

I reinstaled CO, and patched until 4348, changed the version.dat to 4351, but still not working.

I tried to patch back to 4348 no 3 other pcs, but stil giving me that error msg of 1 ... 2 ....

I'm using the same vessel 1.10, cracked using the stand alone guide from anantasia(thanks for that). I used the same on all pcs.

I need to crack again? Is TQ able to change anything on our scriptvessel.exe file?

Please i'm not been able to make vessel work again. Can u help me?

Thanks all! [/b][/quote]
stand alone with cheat engine?
I used the DIY with hex-edit for mine, maybe that has something to do with it =P
dunno rly but mine keeps working ^^

Are you using this guide?

</span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (anantasia)</td></tr><tr><td id='QUOTE'>DIY hexedit Scriptvessel (No need CheatEngine)
1) Open Hexedit and goto offset &#036;49FB (by press Ctrl ,G and insert at hexadecimal box) then replace existing value XX XX XX ... with code E9 C1 2B 02 00
2) goto offset &#036;275C1 (by press Ctrl + G and insert at hexadecimal box) then replace existing value XX XX XX ... with BOLD value code below.
QUOTE

81 3D 04 40 04 10 FF 00 00 00 CMP [10044004],000000FF
74 25 JE 004275F2
60 PUSHAD
9C PUSHFD
68 00 00 00 00 PUSH 00000000
68 00 00 00 10 PUSH 10000000
68 D0 39 00 10 PUSH 100039D0
6A 02 PUSH 02
FF 15 64 E4 42 00 CALL DWORD PTR [0042E464]
C7 05 04 40 04 10 FF 00 00 00 MOV [10044004],000000FF
9D POPFD
61 POPAD
55 PUSH EBP
53 PUSH EBX
51 PUSH ECX
50 PUSH EAX
52 PUSH EDX
9C PUSHFD
50 PUSH EAX
56 PUSH ESI
57 PUSH EDI
E9 04 D4 FD FF JMP 00404A04

3) Save then start program

How-to find obcode (from code above) and hexedit SV V1.10 (1.6 MB)
[Only registered and activated users can see links. Click Here To Register...]
or
[Only registered and activated users can see links. Click Here To Register...][/b][/quote]

If so can you help me via PM? I tried this method but it didn't work out as I think I didn't quite get the coding ^^

If so can you help me via PM? I tried this method but it didn't work out as I think I didn't quite get the coding ^^ [/b][/quote]
I used the similar one for 1.11, worked first time. Imagine that the guide you used is written like this:

Thats easier to read but the steps are basically the same.

Wow thx anatasia nice job!

patch 4351 with CE script for 1.15 working wonderfully Thanks ^^!!!!

If so can you help me via PM? I tried this method but it didn't work out as I think I didn't quite get the coding ^^ [/b][/quote]
I used the similar one for 1.11, worked first time. Imagine that the guide you used is written like this:

Thats easier to read but the steps are basically the same. [/b][/quote]
I tried the SV 1.11 guide several times but it didn't work. When I go into the game, nothing happens when I press F11. In XV132, when replacing the string, I went to Edit -> Overwrite String, and copied the string into the hexadecimal box. Maybe that's the source of the error?
@ the last post: there's no SV 1.15 table... O.o

I used the similar one for 1.11, worked first time. Imagine that the guide you used is written like this:

Thats easier to read but the steps are basically the same. [/b][/quote]
I tried the SV 1.11 guide several times but it didn't work. When I go into the game, nothing happens when I press F11. In XV132, when replacing the string, I went to Edit -> Overwrite String, and copied the string into the hexadecimal box. Maybe that's the source of the error?
@ the last post: there's no SV 1.15 table... O.o [/b][/quote]
yes there is anan posted CE script for 1.15 about 2 pages back maybe more.

tw3ak, what do they block?
cause i can fine inject my own dll into process

dude...can u give me the link of anastasia's guide for sv1.15 ?
i cant find the page... and the link
i cant find the files too
:D

As per request, is in pg 68, here the link:
[Only registered and activated users can see links. Click Here To Register...]

Below is the sv 1.15 file, the link:
[Only registered and activated users can see links. Click Here To Register...]

is this the guide for CE? :cry: i cant understand it...wat should i do to this?
i cant understand the instruction or something... help me pls

wat is SV loader? whats that for?

if SV is made in USA, will it be illeagal to crack it? or the cracker will be sent to court.

just suggesting, no hostility.

i wanna take this chance to thank u so much for ur post u r so helpfull and so kind i sure will +k u but when i can do that.
i don't no if i did it right but i loaded th old (SV 1.08-1.10.CT) and i tried to change the script to that u post and when i press ok it tell there is problem in line 24 (call SetWindowsHookExA) i think there is something wrong in the script .
i am waiting for ur answer if i am did well till this step and if it really has problem or what ??
i wanna ty u again anantasia .

@ana does it work correctly ?

who tried this succesful ? i try it today.

i wanna take this chance to thank u so much for ur post u r so helpfull and so kind i sure will +k u but when i can do that.
i don't no if i did it right but i loaded th old (SV 1.08-1.10.CT) and i tried to change the script to that u post and when i press ok it tell there is problem in line 24 (call SetWindowsHookExA) i think there is something wrong in the script .
i am waiting for ur answer if i am did well till this step and if it really has problem or what ??
i wanna ty u again anantasia . [/b][/quote]
damn, i cant really understand anastasia's guide ...
what does this guide for?
what files do i need before i perform this guide..
where can i get those files
then...what does it means...?
i cant understand it...or if there's any instruction, i cant see it / i cant find it
what should i do first? :?

that script that anastasia post is for the cheat table file (*.CT) that we put on the cheat engine to freaze the SV and make it don't confirme the id and the pass :D that we don't have.
anastasia make a so eazy guild for use that trick.
i think u will understand now

I did it and was working great, but after some time i experienced some slow down, and i decided to re-open it. After that it stopped working, i even tried to restart my pc, and the problem is still the same. Any help would be apreciated.

And thanks again Anantasia for ur hard work.

@masterjoc that is just the script u find in ur cheat engine table just like when u made ur own for v 1.10 you had to put that code unless u just downloaded the script from some post..

here is the scan for the sv loader,
Scan taken on 16 Jun 2007 16:27:55 (GMT)
A-Squared
Found nothing
AntiVir
Found nothing
ArcaVir
Found nothing
Avast
Found nothing
AVG Antivirus
Found nothing
BitDefender
Found nothing
ClamAV
Found nothing
Dr.Web
Found nothing
F-Prot Antivirus
Found nothing
F-Secure Anti-Virus
Found nothing
Fortinet
Found nothing
Kaspersky Anti-Virus
Found nothing
NOD32
Found nothing
Norman Virus Control
Found nothing
Panda Antivirus
Found nothing
Rising Antivirus
Found nothing
VirusBuster
Found nothing
VBA32
Found nothing

nice job, it works nicely. it became much easier than before, i remembered long time ago we had to change the code and changed to nothing...now all we have to do is to paste down and run it. hah, thx alot cracker :)

damn, i cant really understand anastasia's guide ...
what does this guide for?
what files do i need before i perform this guide..
where can i get those files
then...what does it means...?
i cant understand it...or if there's any instruction, i cant see it / i cant find it
what should i do first? :? [/b][/quote]
very simple open cheat engine
then open script vessel
go back to cheat engine click on the little computer in the top right hand corner
select script vessel from the options
go to memory view
press ctrl + a
copy and paste all the codeing here
click on write code
click yes
click on file and click on assign to current cheat table
then go back and click on auto assemble cheat so there is a checkmark in the box
and now it should work

cant explain any simplair then that hope you can do it

hemp
tyvm!!
it finally worked here, i was trying whole day, 1.10, 1.15 , all of them
thx

very simple open cheat engine
then open script vessel
go back to cheat engine click on the little computer in the top right hand corner
select script vessel from the options
go to memory view
press ctrl + a
copy and paste all the codeing here
click on write code
click yes
click on file and click on assign to current cheat table
then go back and click on auto assemble cheat so there is a checkmark in the box
and now it should work

cant explain any simplair then that hope you can do it [/b][/quote]
hi i really think ur explain is so simple but i got a little problem and i need help plz from anyone.
1- i opend SV 1.15
2- cheat engine and i loaded Sv from the processor that works that's ok
3- i pressed memory view and then CTRL+A then i paste the script then file assign current cheat table.
then i saved it as like SV 1.15.CT
4- i made the crack with the hex edite like in 1.10 anansia guide.
---> the problem i can't find that hex 0f 85 92 00 00 00 i only find that 0f 84 92 00 00 00 allready
i tried to freaze it as it and didn't work i made it 84 and din't work i wanna know what i miss.