it does not work for the current version of the bot. Wait for the dev team to fix it.

anyone know how to get multiclient running?i would like to run 2 accs...one needs to be client, and the 2nd doesnt matter if it client or clientless...

so far ive tried using the loader (edx) (wont launch sro)

ive tried runing hsbypass with the loader...(will allow me to "launch" sro but doesnt get to the start button screen)

ive tried the same solutions above with other "User Account" on a seperate drive partition with seperate sro installation & media patched

likewise ive also tried all of the above on a vmware workstation running win xp 64 sp2

my actual os is win 7 home prem 64 bit....running on a laptop it shouldnt be a hardware issue considering im hitting 6.2 rating...

i dont know im a little lost, appreciate any outside help...I miss ibot

i use this one [Only registered and activated users can see links. Click Here To Register...] hope i helped :)

I see that some are getting this to work, might as well give a try.

I tried SBot and it didn't work for me.

Can someone give me a brief explanation of how to set this up. I pretty sure I have to put media patcher in the sror directory and path the file path.

Not sure what other steps I need to complete.

Thanks

BTW: I tried using guide on OP first post but it was 404 not found, and I can not really find any other up to date guides for this online.

what operating system are using? the setup for the bot varies slightly depending on what ur using, once u give me that info, i can try and point u in the right direction

Does it currently work?

it is working with a few little probs, like auto reconnect do not work as well as clientless!

a few pages before thay said auto reconnect dont work and multi client I tought.
but i got an other problem too...:
I cant get over the ferry to roc mountian. any1 a sollution?

This is the code to travel from Karakoram Northeast to Roc Northwest.
Insert these after stepping in front of the ticket seller.

Guys i often get after 20 30 min or 1h a crash. anyone had same problem and could fix it ??

Has anyone figured out how to get the new Chinese skills to show up in bot?

The downloading link doesnt work (( give me the link for the bot pelase

How do you get this to actually work? I've added it to my script manually and even created my own script. It gets to the npc and just sits there continuously.

Post your script and I might find something.
Chinese or european?
below or above lvl 70?

Also you might wanna search for my earlyer post, where i described the steps of recording a script.
You just need to travel the ferry while recording and the code is in the script.

I'm CHN and Lvl 81 at the moment.

"exit town","hotan","roknorth"
"inject","[SelectObject]","{Airship Ticket Seller Dawari}"
"inject","[Action]","{Airship Ticket Seller Dawari}02{GATE_NPC_RM_FLYSHIP1}"
"cmd","[delay]","11"
"Walk","(-3215,622,252)",""
"Walk","(-3262,596,251)",""
"Walk","(-3294,557,255)",""
"Walk","(-3313,524,265)",""
"Walk","(-3330,492,273)",""
"Walk","(-3340,472,278)",""
"Walk","(-3360,432,283)",""
"Walk","(-3373,403,287)",""
"Walk","(-3426,379,307)",""
"Walk","(-3454,369,319)",""
"Walk","(-3490,365,330)",""
"Walk","(-3524,360,338)",""
"Walk","(-3571,355,346)",""
"Walk","(-3609,356,351)",""
"Walk","(-3648,373,354)",""
"cmd","[clear hunting]",""
"cmd","[add hunting]","-3648;373;40"
"cmd","[add hunting]","-3611;354;25"
"cmd","[add hunting]","-3691;391;25"
"cmd","[start bot]","//Last line of script, start bot"

give the link for the bot PLEASE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!

Ah, that doesnt work anymore.
The line used to automatically walk the bot to the ferry and travel, but the developers forgot to update the codes, i suppose. so you have to insert the entire walk to the ferry plus the travel codes into the script.

try the code like this:
the ferry codes are those for traveling free of charge, cuz i have no char above 70.
Not sure if they work for a char above 70 as well, but give it a try.
If not, I can tell you how to generate the code yourself.

sry for long post

IS THERE ANY WAY TO GET THIS BOT NOW ??????????

Dan, how can one be so lame? look through the thread like everyone else did to find it, instead of spamming the forum.
If that´s too hard for you, don´t even try to get the bot working.

Yes! That worked. Thank you very much :awesome:

Who can please give me code that tells to the bot to go to the the free merchant supplier

Where exactly should i look for the link ?

i need a link to download agbot cuz i cant find it on this site

Thank u very much !!!! I GOT IT WORKING AND ITS AWESOME !!!! BUT CAN U TELL ME HOW TO OPEN 2 OR MORE CLIENTS ?

It seems that the bot is still working after the update. But i don't know if he is detectable now.

what loader do i need for agbot?

is it safe to use bot now? you dont need loader, you need nuconnector, agbot and silkroad :)

I´ve been using it continously for the past 6 months, although there have been only 2 updates in that time and haven´t been caught yet. I even used wrong inject codes in that time several times.
It´s not safe, never has been, but joymax don´t seem to be after botters too much since the 2 clients per IP rule does a pretty good job to prevent massive goldbotting.

Please tell me how to use edx loader or other ways to use multiclient with this bot

Help me with the multiclient to please

edx loader is long outdated and highly risky to play with.
The only way to have 2 clients is with [Only registered and activated users can see links. Click Here To Register...] or 2 computers, somebody has managed to run 2 clients with just running 2 different users in windows, try your luck. You can´t run more than 2 clients over the same external IP.
btw, all this has been described before, it´s somewhere between all those unnecessary questions. Softmode pliiiiiiz?

@kkiissee
the free potion code has a whole page in this thread, and I´m not looking it up for you, you´ll have to look through all the other spammers yourself.

Are u sure that edx loader is outdated ? I used it for ibot

why on this bot dont working range >? or i dont know how to make >?

and in the bot folder there is hackshield stuff included and edx loader

You can take this if you are in hotan

"exit town","hotan","middle"
"Walk","(153.2,48.8,24.4)",""
"inject","[SelectObject]","{China Medicine Supplier Dae-Pyeong}"
"inject","[Open NPC Window]","{China Medicine Supplier Dae-Pyeong}02"
"inject","[Quest]","05"
"inject","[QuestReward]","489C00000156980000"
"inject","[SelectObject]","{China Medicine Supplier Dae-Pyeong}"
"inject","[Open NPC Window]","{China Medicine Supplier Dae-Pyeong}02"
"inject","[Quest]","05"
"inject","[QuestReward]","489C00000152980000"

otherwise you will have to do by yor own and record it.
Just made with the Help of Mighty Al on Page 803.

about multiclient....it does work for some ppl however there is alot of setup required to do so.

the only way you will be able to multiclient is to have a hs server setup on a remote network or pc other then the one u plan on play/botting with.

even if u do have a hs server setup you will still need a vnc/vpn (ie a way of changing ur external ip address)

edxloader works with this method (just like any 3rd party software there is no guarantee that it is undetectable so use at own risk)

user switching works with this as well, or u can setup a virtual pc but yet again u need to use a vnc/vpn to change ur external ip


as for having the bot go to the beginner potion suppliers chn/euro, copy and paste the original script from the script folder to where ever u want... open the copy in notepad, delete everything except the first line ie: "exit town","hotan","middle"...save the script. have the bot load the script u just edited. start the script, go to "purchases" tab on bot
and set buy potions arrows scrolls etc to 0....click "reset" button on bot. Now start the bot, since u arent buying anything it should move through townscript pretty fast, it will then stop at the last coordinate of the town script, Click stop bot. Now click on the "script" tab, click record, now manually walk to the beginer potion merchant, select the potion u want, close the merchant, open the merchant back up click on the next potion u want, close the merchant. u have to open, select potion close merchant for each item u want from the merchant. after u have done this, and u are ready for the bot to leave town, click on "script" tab in bot, then click reverse walk. copy and paste all of the text from the script window, into the original script between the "exit town","hotan","middle" and the first line of the walkscript...this is the same process of making ur own quest scripts, i only recommend doing this for "repeatable" quests.

If u dont understand any of what i just said about the potion script.... just leave a reply to this msg with the script u want to use, the type(s) of potions u want to buy and or or arrows/bolts and i will whip up a quick script for u

HELPP :( every time I open nuConnector and then try to open agBOT it tells me
"Run-time error '339':

Component 'MSWINSCK.OCX' or one of its dependencies is not correctly registered: a file is missing or invalid"
what do I do?

Had the same problem. I think thaqt you haven't installed the Libary Files which are needed for the bot. But I dont' realy know where you can get these without a Virus. You will have to look it up by your own or someone has it.

[Only registered and activated users can see links. Click Here To Register...]

I got it there.

[Only registered and activated users can see links. Click Here To Register...]

THANKS :)
 

so that totally helped and I have everything working except when I try to run a script and it tries to walk, the config says its trying but it doesn't move... any suggestions?

You may have some item in your inventory the bot can´t handle. get rid of any event items for a start.
also i don´t know if it already knows the new chinese skills. If not you´ll have to unskill them. That´s what helped me anyways...