elitepvpers - [Free BOT] AgBot(rev6) Releases & Support

elitepvpers (https://www.elitepvpers.com/forum/)

- SRO Hacks, Bots, Cheats & Exploits (https://www.elitepvpers.com/forum/sro-hacks-bots-cheats-exploits/)

- - [Free BOT] AgBot(rev6) Releases & Support (https://www.elitepvpers.com/forum/sro-hacks-bots-cheats-exploits/115015-free-bot-agbot-rev6-releases-support.html)

Version 2.7.5 really sucks the walkscript and everything works fine till u get to the hunting area. It was fine killing for the first few mins but when there were no mobs to hunt. It kept running and running and running round in circles.
I stopped bot and reset my hunting area to where i was standing at the time killed monsters and same again running around. Also this time i had 2 giants on me killed one and kept running around in circles with the other one following. Hmm i prefer v 2.7.0 to the newer ones coz they have more problems.

2.7.0 is fine other then the walkscript when u teleport sometimes it works and runs the walkscript sometimes it just goes to attack area in straight line and gets stuck at wall.

and can anyone post a working link to that 2.7.0 package plz

#1st post updated to 2.7.5

Problem With Agbot

Hello people I use agbot 2.7.5 and now I have one problem. I have a Wizard/Cleric and I need buff Recovery Division and Holy Word. I can buff but, the bot change weapon 4 times to attack. Someone can help me?

On request:

[Only registered and activated users can see links. Click Here To Register...]

Content:
NuConnector 81
AgBot 2.7.0
Navmesh
Monsterscript
data (item.txt is updated; so bot won't buy wrong pots)

edit: These are just the files of version 2.7.0.
U need a "working" version & then just replace your current files with my files ;)

Quote:

Originally Posted by Kamicolo (Post 1884981)

On request:

[Only registered and activated users can see links. Click Here To Register...]

NuConnector 81
AgBot 2.7.0
Navmesh
Monsterscript
data (item.txt is updated; so bot won't buy wrong pots)

Thanks Kamicolo.

hi, my agbot disconnect every time, about 15-30 min.
im using 2.7.5 version + nuconector 81 + loader
Anyone knows how to fix that?

PS¹: i had deactivate windowns firewall and my antivirus
PS²: Im using Vista ultimate.
PS³: sry for my bad english.

I have the same problem too. I use agbot 2.7.0, nuconnector81 and loader 1.175. Someone can help us?

P.S1.: Firewall off.
P.S2.: And I run the bot as administrator.

Nice Update but there still many buggy things

# Pick only if no Monster attacking you dont work
# Sometimes the Bot standing 5 minutes in front of the Mob and do nothing
# Skill Bot need 5 seconds to use general after he use first attack
# He sometimes ignoring attacking Mobs
# He sometimes attacking the first mob, stop gonna run to the next mob pull him and go back to the first mob
# He sometimes attacking far far away Mobs
# The Avoid Mobs System sucks
# He dont pick up all items
# You can't set only items no money

ok, this bot is really starting to be pathetic.
one problem after another can't they just get it right?
now its not even working i click start bot doesn't do anything and then i go to pick my hunting area and nothing comes up

Quote:

Originally Posted by superwariormv (Post 1886416)

Well then, just stop complaining and go buy a bot!
I guess u know jack sh1t about programming...
They remade the attack-script (to attack/select mobs faster & pick up items faster); they are also updating the script system to make it even more easy to use!
Apparently u think programming is easy, well it isn't!

And if 2.7.5 doesn't work, just go back to an older version; I already posted version 2.7.0 for people who have a "non-working" bot

Use SRproxy instead off Nuconnector <- = D/CConnectors lol

Quote:

Originally Posted by Kamicolo (Post 1886478)

ok well ya i obviously know nothing about programming :)

but its working now =)

but i was wondering when i set it up do i go afk or can i still do stuff cause it seems when ever i still do stuff it closes cause i was afk and it was working perfect and then my brother comes on the computer and clicks the start button and boom it closes itself like it just disapears :S

can some 1 please make a video showing how to use the new script maker

Quote:

Originally Posted by jeffry24 (Post 1887167)

can some 1 please make a video showing how to use the new script maker

Browse through some topics.... Read the readme or just wait till the nextupdate for user-friendly version>.> Dude if u just go to this folder.

AGBOT\MonsterScript

Go there and view those scripts its cake

Quote:

Originally Posted by John Dread (Post 894436)

Please Read this before asking questions!

Important!: If you have any information that fits in this post, send it to me or post it in here and if it's usefull i'll add it.. credits to you!

Yes this bot has loop! But it is still buggy! Loop is that it will buy pots, repair etc. and then goes back to hunting area

The recommended version (newest version with the less bugs) of agBot is 2.7.5 in combination with nuConnector81

Current Version of agBot:
Package: 2.7.5
Download: [Only registered and activated users can see links. Click Here To Register...]

Update:
AgBot: 2.7.5
Download: [Only registered and activated users can see links. Click Here To Register...]

Recommended version (2.7.5):
Download: [Only registered and activated users can see links. Click Here To Register...]

Little guide to make the bot work
Thanks to Herm1t

First you will need the following files

***** Installation ******

1) Register the OCX files

copy VbEcplipse.ocx into C:\Windows\System32

then click start > go to the "run" box, then type the following:

regsvr32 "C:\Windows\system32\VbEclipse.ocx"

and press enter

Repeat the above for the 2 other ocx files ( comctl32.ocx and comdlg32.ocx)

ie. use regsvr32 "C:\Windows\system32\comctl32.ocx"

then use regsvr32 "C:\Windows\system32\comdlg32.ocx

2) Download the "library files" and install them

3) Having extracted ver 2.7.5 of agBot to any folder
Copy MediaPatcher.exe into C:\Program Files\Silkroad and run it
(it will create 2 files port.bak and ip.bak)

4) now Run nuConnector.exe

6) Run agBot.exe

7) start silkroad

Most important. If you have been struggling to get agBot to work with a realease later than 1.55, I suggest you uninstall silkroad, then run a good registry cleaner (regvac) before re-installing and updating the client to 1.175, then follow the above steps.

Once installed use the guide site for help with configuration.

How to make the loop work:
Don't post: Can anyone make a guide?! It's on the official bot website! This will soon be translated to your own language! Please let the translaters do their job!

No problem name? xD
For people who use AVG AntiVirus. This free tool is blocking agBot, so if you want to use it. Please turn off your AntiVirus and don't download something, don't visit internet sites, only play the game in the time that your AntiVirus is off!
Thanks.

Howto fix invalid target:
Thanks to zangetsu123

I used to get ALOT of invalid targets while picking up items.. Bot stops for a long time and didn't pick up items that dropped like gold/alchemy items etc etc ..
So the solution is as following;
Raise process priority of agbot above normal (It wont hurt your other programs when you raise process priority of agbot) once you did that.. all invalid target and other problems like picking up stuff will be removed..
Atleast its working for me ..
agBot is working for me like Tbot or any other bot without any bugs etc xD
add thanks please if I helped and if its really helpfull add this to main page troubleshoots :P

Vista Problems (and sometimes WinXP):

Missing .ocx Files
Some people are getting error 339 (Missing .ocx file).
This are most of the time two files, first VbEclipse.ocx and after that comctl32.ocx and comdlg32.ocx. What to do with this error:

You need to have the three files: [Only registered and activated users can see links. Click Here To Register...]

Put the three files in your system32 map (C:\Windows\System32\). Stay in the system32 map and search for cmd. RightClick on it and run it as an admin. The command prompt will open. Type: "regsvr32 C:\Windows\System32\VbEclipse.ocx" without "" and press enter. It'll say the file is registered.

Another line to fill in: "regsvr32 C:\Windows\System32\comctl32.ocx" without the "" and press enter again.

And the last file to register: type: "regsvr32 C:\Windows\System32\comdlg32.ocx" without the "" and press enter for - finaly - the last time :p

MOST QUESTIONS ABOUT THIS: agBot DOESN'T SHOW UP!!! (Vista) :confused:
If you work with XP, try installing the library files. On the bottom of this thread you can find a link!!!
This has to do with the Admin stuff. Solution:
First if you have patched with MediaPatcher, unpatch it.

After that, go to your silkroad folder (Standard: C:\Program Files\Silkroad) and select agBot.exe, nuConnector.exe and MediaPatcher.exe. One by one please ;). Right click on the file you selected and click properties, then select it to run as an administrator.
Patch the game and now it should have fixed the problem. But don't forget to run the bot and nuConnector as an admin!!!

Links:
Files

Download Link for the LibraryFiles: [Only registered and activated users can see links. Click Here To Register...]
Download Link for the .ocx Files: [Only registered and activated users can see links. Click Here To Register...]

References:

Webpage of Bot:[Only registered and activated users can see links. Click Here To Register...]
Wiki-page of Bot:[Only registered and activated users can see links. Click Here To Register...]
Loader: [Only registered and activated users can see links. Click Here To Register...]
NoDC: [Only registered and activated users can see links. Click Here To Register...]
Issues: With a agBot script! + Fixes!: [Only registered and activated users can see links. Click Here To Register...]
AgBot tutorial by Mass Mods: [Only registered and activated users can see links. Click Here To Register...] <---old but tells you the basics of setting the bot up

Guide for mc, how to install, how to use, etc.!
[Only registered and activated users can see links. Click Here To Register...]

Thanks to Sharp121

Overworked by John Dread

#status - inVincibLe

I have problem i make evrything but after version2.7.0 no1 version doesn't work or if work work no good Bot pick up item in version 2.7.5 offf jus't i haven't words

Not show Charecter name or can't load config . Ireinstal ocx liblaris file all nothing
intresting when ia copy old version2.7.0 evrything is ok

Pls help me

Quote:

Originally Posted by intelpentium (Post 1887665)

I have problem i make evrything but after version2.7.0 no1 version doesn't work or if work work no good Bot pick up item in version 2.7.5 offf jus't i haven't words
Not show Charecter name or can't load config . Ireinstal ocx liblaris file all nothing
intresting when ia copy old version2.7.0 evrything is ok
Pls help me

Why quote the whole first post :s :s :s
Answer is simple: version 2.7.5 is (very) buggy
Send a bugreport & use the last working version to bot while waiting for a new version

how i set the priority of a program?

Quote:

Originally Posted by John Dread (Post 894436)

Overworked by John Dread

#status - inVincibLe

It's no work i reinstal evrything Nothing after 2.7.0 work
Help
p.c. When i put 2.7.0 in bot folder evrything work perfect again

Hey guys,
I got this error here I'll post it I'm not sure what it is :confused:
This is what is in the Notepad folder:

"7D0700000000370747030000008F030000006B03000000DA0 3000000B303000000FB030000009E00000000050000E73FAE0 28B5B112B0D44071E434229625044778C01018B5B340230004 1030100006766E6410000B4420000C84205910500006C82050 00505000020EA0100F9040000F98F04008F4C0000C25206007 3040000880C000006006A6F6C64693600010000010000000C0 05468654461726B576F6C6673680100000700476F6C64426F7 40000000000000000000000000000FF3D0800005926C6028B5 B00C011449E09424200804E44E90801018B5B470230003A030 100000000C841000096420000C842000000"

The folder is called Err7

anyone know what to do with this thing or what it is?

okay, im using vista, and when i try to reg the VbEclipse.ocx i get a error stating it failed to load,
then it says
"Make sure the binary is stored at the specified path or debug it to check for problems with the binary or .DLL files"
i looked at the file in system 32, and i noticed that there is no dll for vbeclipse, but there is for the other two files,
anyone know how to solve this?

Quote:

Originally Posted by DarkTwilight (Post 1886496)

Use SRproxy instead off Nuconnector <- = D/CConnectors lol

thx, my problems is resolved

Quote:

Originally Posted by GoiAniM (Post 1888588)

thx, my problems is resolved

No prob:) Lol i used nuconnector81 for 10 seconds >.> "its more stable" They said i lasted 10 seconds without an d/c and jumped back to SrProxy =P

Hey hey so i see theres a little backdoor in the NuConnector.81 :mad:

Here is what my anti virus said:

McAfee has automatically blocked and removed a Trojan.

About this Trojan
Detected: BackDoor-AWQ.b (Trojan), BackDoor-AWQ.b (Trojan)
Location: C:\Documents and Settings\Owner\Desktop\agbot\Package\nuConnector81 .exe

Trojans appear as legitimate programs but can damage valuable files, disrupt performance, and allow unauthorized access to your computer.

could this be a false positive?

Guys ive aquestion if the wolf died does agbot auto relive and summon it ??

Quote:

Originally Posted by mokom74 (Post 1890227)

Guys ive aquestion if the wolf died does agbot auto relive and summon it ??

No. Maybe if u buy a grass off life but im not sure. . .

And for the nuconnector they updated it and yes its a false alarm.

:ohe men plz help me mi nuConnector not work:(

if i use srproxy sro will not log in although i started nuconnecter after srproxy ... and when im botting my char pick all items although i config Do not pick item

Omg this bot is damn buggy

the messing with WINDOWS files and sis 32 wont damege th PC? =\

I used this bot.. but it's a loong time ago.. and now.. i did all i right (so i thinkt), but i when i open Sro, i can't click start.. :S

Hope you can help me.. thx and c'ya..

(sorry.. for my bad english)

EDIT: It was because of the NODC client.. how, can i nodc and bot combinate?!

i have problems

the libertyfiles,when downloaded and pressed? says : this file contains invaild data

=\

and when im presing on the agbotexe its says error399
component MSWINSCK.OCX not registared

help

First of all Thank u very much!!!
Now i have a problam with the bot loop in hotan-it doesn't repair my items...
i'v pressed stop walking, sell,repair and close and it didnt repair
(store and pots did just fine) hope to get an answer or a response
thank again and thank every one who helps!!

Quote:

Originally Posted by gamal18 (Post 1892961)

Try restarting the bot lol Repairing is a standard procedure off the bot.
And for the no d/c Get Rumuta's Loader. Outdated but still workes Fine ;)

hi all pls help [Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]] Thanks ( im instal all )

Why does my bot just close itself after 5 minutes running?

I am using Sroproxy + Loader + agbot newest version + winxp SP2. I am at DonwHang.

Quote:

Originally Posted by wizi83 (Post 1893455)

Why does my bot just close itself after 5 minutes running?

I am using Sroproxy + Loader + agbot newest version + winxp SP2. I am at DonwHang.

im on winxp SP3

2.7.5 is really slow at targeting/atacking mobs...i stay with 2.4.1 which is almost tbot for me...

Hi every1!!

I think there is a new Item.txt, so the common generator ([Only registered and activated users can see links. Click Here To Register...]) seems to be outdated. Is that true or am I stupid? :D
If true, is there a new one?
Maybe I can make a new one, but first I'll need little explanations on the syntax.

Lets have this row from the Item.txt as an example:
"B9000000","ITEM_CH_TBLADE_03_A","Merchant's Hook Glaive",2,16,17000,6120,1,6,5,#FALSE#,1

"B9000000"
i guess this is something I dont need to care about ^^

"ITEM_CH_TBLADE_03_A"
item, chinese, glavie, 3rd degree, A = first weapon of 3rd degree

"Merchant's Hook Glaive"
the items name

,2,16,17000,6120,1,6,5,#FALSE#,1

1st - floor, inventory, storage ... (i need help here)
2nd - item's level
3rd - price to buy from npc?
4th - price to sell to npc?
5th - ?
6th - ?
7th - ?
8th - #FALSE# / #TRUE# (what does this mean?)
9th - ?

Any help is appreciated :handsdown:
THX