[FREE] PUBG RADAR undetected packet sniffer

[heller23]

Originally Posted by costydatare

Just pm the owner of topic , he will give you the updated version of hack where everything works very good , green point is following your location , map is following you too.

I tested the new version. He sent me the link for download. For me, its not working. I start the programm, i have to type in my IP and nothing happens. The old versions works (with the bug, that the green point and map is not following my location)

[iDolan]

Originally Posted by DerLobo

Just do it like this

 Spoiler

On 2nd PC or VMWARE: (This is the pc that will run the radar)

Step 1: Search and run "cmd" - This should open the command prompt.

Step 2: type "ipconfig" and press enter.

Step 3: Take note of your IPv4 address for VPN Settings on gaming pc.

Step 4: Take note of your default gateway.

Step 5: Search and run "ncpa.cpl"

Step 6: Right click your primary internet adapter, then click properties.

Step 7: Select "Internet Protocol Version 4 (TCP/IPv4)"

Step 8: Use "Obatain an IP address automatically" and "Obtain
DNS server address automatically"

Step 9: Click "OK"

Step 10: Uncheck "Internet Protocol Version 6 (TCP/IPv6)

Step 11: Click OK. - The PC may need up to 10 minutes for settings to refresh.

Step 12: On your keyboard, Press ALT - File will now appear on the top left.

Step 13: Click File, Then click "New Incoming Connection"

Step 14: Add someone (bottom left) - Make username and password - click ok - Then click Next.

Step 15: Checkmark "Through the Internet" - Then click Next.

Step 16: Select "Internet Protocol Version 4 (Already selected by default, make sure it is checkmarked" Then select "properties"

Step 17: Make sure "Network Access" is checked

Step 18: Under "IP address assignment" Check "Specifiy IP Addresses"

Step 19: Use your Default Gateway from earlier, to create a proper IP range for "Specify IP addresses"
For instance: if gateway is 192.168.0.1 - use 192.168.0.2 to 192.168.0.10 for
the ip range. - Then select "OK"

Step 20: Select Allow Access

Step 21: DONE. Now to setup the Gaming PC.

 Spoiler

On Gaming PC: (This is the PC that will run PUBG)

Step 1: Search and run "ncpa.cpl"

Step 2: Right click your primary internet adapter, then click properties.

Step 3: Select "Internet Protocol Version 4 (TCP/IPv4)"

Step 4: Use "Obtain an IP address automatically" and "Obtain DNS server address automatically"

Step 5: Click "OK"

Step 6: Uncheck "Internet Protocol Version 6 (TCP/IPv6)

Step 7: Click OK. - The PC may need up to 10 minutes for settings to refresh. Now close out the "Network Connections" window.

Step 8: Click your windows button (default location bottom left)

Step 9: Click the settings cog

Step 10: Click "Network & Internet"

Step 11: Click "VPN" on left side

Step 12: Click "Add a VPN Connection" on the top

Step 13: Use these settings:
VPN Provider: Windows (built-in)
Connection name: Random name
Server name or address: Insert 2nd PC IPv4 address from cmd prompt on 2nd pc
VPN type: PPTP
User name: User you made on incoming connections on 2nd pc
Password: Password you made on incoming connections on 2nd pc
Click Save.

Step 14: Connect to the VPN that you created.

Step 15: If you were able to connect, you are done!

What does it mean at step 12 "Step 12: On your keyboard, Press ALT - File will now appear on the top left. " I dont understand

[refaa]

wait i got it to work now iam here

C:\Users\refaa>mvn compile
[INFO] Scanning for projects...
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building pubg-radar 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO]
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ pubg-radar ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory C:\Users\refaa\src\main\resources
[INFO]
[INFO] --- maven-compiler-plugin:3.7.0:compile (default-compile) @ pubg-radar ---
[INFO] No sources to compile
[INFO]
[INFO] --- kotlin-maven-plugin:1.2.21:compile (compile) @ pubg-radar ---
[WARNING] No sources found skipping Kotlin compile
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 6.675 s
[INFO] Finished at: 2018-03-01T17:20:00+01:00
[INFO] Final Memory: 11M/31M
[INFO] ------------------------------------------------------------------------

[heller23]

Originally Posted by heller23

I tested the new version. He sent me the link for download. For me, its not working. I start the programm, i have to type in my IP and nothing happens. The old versions works (with the bug, that the green point and map is not following my location)

Okay, i typed in the false IP-adress, lol .

[snu-snu]

do you know why I get this issue:
1) start the radar.
2) Get the option to choose the network interface to monitor
3) press OK

and then NOTHING happens.

Use it on second machine (connecting to it VIA VPN)

Using WIFI btw
Wincap and java installed and latest.

[ThinkpadX220]

Originally Posted by snu-snu

do you know why I get this issue:
1) start the radar.
2) Get the option to choose the network interface to monitor
3) press OK

and then NOTHING happens.

Use it on second machine (connecting to it VIA VPN)

Using WIFI btw
Wincap and java installed and latest.

What's your graphic adapter on second pc. This radar app needs opengl 3.3 support.

On my old laptop with intel 3000 (i5-2540m), it doesn't work.

[costydatare]

Originally Posted by heller23

Okay, i typed in the false IP-adress, lol .

oh yeah . nice job ) There are a lot like you that do this wrong and after say that this is scam , not working , etc . Just follow the steps right and it will work . The radar hack is free guys so dont expect anything more for free . Just put your brain at work a little and you will solve how to install it correctly .

[#569]

Great Radar,
working for me since first minute of release and still not banned.

[stvn7861]

Originally Posted by Bl00dWolf

EASY all working

Did you make this work for yourself?



I want to run on 2nd pc not in vm. Can you guide me how to do it?

[beastly101]

For those of you who may have managed to work this can you help with the following:

My characters green pin doesn't seem to move or update after spawn, I can see the enemies on the radar fine. How do you fix this?

Secondly the thing eats up cpu and causes the actual game to stutter, did you manage to fix this issue too?


For those of you who are struggling with the running:
- the grey screen is normal, it updates once the game begins and you start a game.
- the VM needs to be "bridged" (google will help)
- VM tools must be installed

[chaze27]

Originally Posted by beastly101

My characters green pin doesn't seem to move or update after spawn, I can see the enemies on the radar fine. How do you fix this?

He already have an updated version that fixes the local player postion, just wait untill he got enough feedback from the testers and he released it.

[beastly101]

Originally Posted by chaze27

He already have an updated version that fixes the local player postion, just wait untill he got enough feedback from the testers and he released it.

Thank you, appreciate your response. I must have missed that.
Looking forward to trying to new release

[snu-snu]

Originally Posted by ThinkpadX220

What's your graphic adapter on second pc. This radar app needs opengl 3.3 support.

On my old laptop with intel 3000 (i5-2540m), it doesn't work.

yup, second laptop is quite old, with celeron and probably openGL 3.3 is not supported.

is there any way to bypass this?

I had another radar (paid), and it worked on that machine :/

[KevinCostner1990]

Theres a new version above the version at first page?

[blake678]

everything working great in the same pc second monitor. but when I open it in 2pc via VPN the hack don't follow my location . it just stays in place and i must move it manually . can you solve this ?