Any suggestions to finding no skill cast delay with MHS in Cabal NA?

[apeplus]

I need some suggestions to find the cast time address to freeze it, but I dont get the old guides such as bellow. If anyone can give me pointers because i assume this method still somewhat works.

1. Run your bypass(Cabalbot) then open your cabal client login...

2. Once you're in game open your CE or Sora Engine 2.3

3. Then make your cabalmain.exe as a target

4. First steps are the ff:

* 4.1 the value should be 0
* 4.2 Scan Type = Exact Value
* 4.3 Value Type = Float (and as default Truncated option should be
checked)
* 4.4 Now press "First Scan", there should be addresses
shown in the left side window of your CE after you click it.
* 4.5 a range of 3k-4k addresses found should appeared

5. This is the tricky part

* 5.1 After you perform the steps in step4 go to your cabal client.
Do a skill on a monster or a dummy, then switch back to
your CE and change the scan type into Increased
Value
* 5.2 After you change the scan type PRESS NEXT SCAN.
* 5.3 Do 5.1 & 5.2 UNTIL the addresses left are 22-31
* 5.4 Now Look for an address with the ending value of E-41,E-
38,E-30
* 5.5 For an accurate result double click all addresses with an
ending value of E-41,E-38,E-30.
* 5.6 Once the addresses you pick are in the list you can now edit
the values of each addresses
* 5.7 I suggest you edit the values 1 by 1 not simultaneously as this will cause your cabalmain.exe to corrupt/error IME.
* 5.8 Now edit the values to 0 and check the FROZEN CHECK BOX!

It's Two-in-one hack

Note: Memory Scan Option Should be at 01D00000 to 01E00000.

[.Law.]

Easier to do is....
Search for 1
Dance ,search for 0
Stop dancing ,search for 1
Dance,search for 0 ,
Keep it up untill you have few adresses ,lock it on 1 and u can cast skills without delay.

[NoobWant2Learn]

^
^
Bad news are when you die you cant resurrect, and you will get death penalty=P

[apeplus]

Originally Posted by PunkS7yle

Easier to do is....
Search for 1
Dance ,search for 0
Stop dancing ,search for 1
Dance,search for 0 ,
Keep it up untill you have few adresses ,lock it on 1 and u can cast skills without delay.

I remember i tried that before in the past, i just started to dance and couldnt stop dancing lmao

but i will try it again, maybe i did something wrong in the past.

oh btw is it byte? float? etc?

[apeplus]

Originally Posted by PunkS7yle

Easier to do is....
Search for 1
Dance ,search for 0
Stop dancing ,search for 1
Dance,search for 0 ,
Keep it up untill you have few adresses ,lock it on 1 and u can cast skills without delay.

well i tried it but it doesnt seem to work, i just cant move but clicking different skills still hits cool down.

[dlnqt]

its the default byte in CE.

@apeplus

try this:

when you use a skill, click your mouse somewhere as if you're moving, the click another skill.

skill>move somwhere>skill>move somewhere

like that.. you'll get disconnected after a while though, just like SH.

BTW, memory scan range is different for every cabal client.. and don't forget DMA

[.Law.]

And if u cant stop dancing after using it ,you got the wrong adress.

[howcow95]

Originally Posted by PunkS7yle

Easier to do is....
Search for 1
Dance ,search for 0
Stop dancing ,search for 1
Dance,search for 0 ,
Keep it up untill you have few adresses ,lock it on 1 and u can cast skills without delay.

This worked perfectly for me

edit: well yea... I dced after a bit but I think it's cuz i got carried away and spammed too much but is there any way to know the limit of how much you shud spam or not?