Run/Walk Speed Hack

09/15/2007 00:20 crwildes#1
Has anyone got this working yet? I so far can only increase attack speed and range of attack. Also, Does anyone know how to search for range attack of skills. I have tried unknown variable search and increase, decrease according to "run/walk". Just can't seem to find it. Has anyone else been able to? Just curious. Thanks.
09/15/2007 03:02 crwildes#2
in engine select value type "array of bytes" then search for value 3f 00 00 80 3f 81 95 21
then add to adress list and change value to
3F 00 00 80 40 8B 6C BF

This does work for run speed. But, You get disconnected after about 5 seconds, sometimes you get lucky and can last a minute. I was looking for something that works a little longer. Lets keep this thread going if anyone has any tips.
10/02/2007 20:35 Sillyrabbit#3
this is a direct copy and paste. i take no credit. the creator is Fykick

Code:
Okay so first off, apparently after like a day working on this, and 2 days later of using it, I got banned upon mentioning it. Probably a spy here in the forums, or maybe I just got unlucky. Whatever the case, I'm not going to be just another person that claims something and doesn't deliver. Regardless of what happens to your char, here is how the speed hack works. Use at your own risk.

The original values I used were the only ones available to me at the time and those happen to be q-balls Instinct speed arrays from the other posts(forgot name). So here goes.


Normal speed : 3f 00 00 80 3f 81 95 21 40 66 65 00 00 68 00 02
Speed lvl 1 : Was not sure, but apparently did not matter later on
Speed lvl 2 : 3f 00 00 80 3f a2 45 54 40 75 85 00 00 68 00 02
Speed lvl 3 : 3f 00 00 80 3f a6 9b 5a 40 75 89 00 00 7c 00 02

Deducing from these I found that the first half of the address increases in intervals of 20B033 and the other half increases(the value was actually halfed and added each time) in intervals of 80000280000. Therefore to get anything beyond lvl 3 speed I simply took 20B033 x 3 and added it to 3f 00 00 80 3f a6 9b 5a, because it is the part of the address which controls your speed. Plus it is the first part of the level 3 skill, and we want to find the next level up. Then to find the last half which was never really important, and why I was trying to find more people with higher level addresses. I was hoping maybe the key to the attack speed was in here. But alas I was banned and now I don't care about that ^__^. Also I was using an Azure Knight for most of the times, but it seemed to work on my bagi also. So now I leave you with the addresses calculated out, and side notes for each of them.

Level 4? maybe >> 3F 00 00 80 40 08 AB F3 40 75 89 2A AB 27 80 02
Level 5? maybe >> 3F 00 00 80 40 8B 6C BF 40 75 8B 2A AB 31 80 02
Level 6? maybe >> 3F 00 00 80 41 2E DD BE 40 75 8C C4 44 D3 19 9B

The thing about these are that whether they are the right skill numbers, they work, and I've played well over an hour without d/c. Number 5 seems to be the most spastic, but is still safe. 5 and 6 are obvious the fastest run speeds. The only time I d/c was in high activity, such as when I was pvping with my friend and we were both trying to attack at the same time, and when trying to run long distances without pausing to kill a mob. So the remedy is, turn on the speedhack when you need to use it around mobs. Put the default value back in when you need to change maps. And it apparently doesn't matter how far you push the limits as long as you stay within the rules of adding multiples of 20B033. At least the multiples I tried did not matter. But after you see how fast you run with the values given, it doesn't really get much faster than that.

I think that is everything, if you have any questions let me know. Or just want to tell me how you have had this all along and now hate me for posting it, than w/e. Maybe you have the attack speed too, and I'll just say congratulations for keeping it secret this long, or not getting banned.
03/15/2008 11:35 Mastershouter#4
Normaly i dont bring up older threads, but in this case i have a question.

Yesterday i saw a speedvachacker on eudek. (He runs ubberfast and the mobs follow him that fast to) and he told me i have to edit my speed in the csv files.

So my question is where in the data.pak i have to search for it? In which folder i mean, not the offset for winhex. May somebody can help.
03/15/2008 12:31 wtfanoob#5
Quote:
Originally Posted by Mastershouter View Post
Normaly i dont bring up older threads, but in this case i have a question.

Yesterday i saw a speedvachacker on eudek. (He runs ubberfast and the mobs follow him that fast to) and he told me i have to edit my speed in the csv files.

So my question is where in the data.pak i have to search for it? In which folder i mean, not the offset for winhex. May somebody can help.
If he told you to modifiy in .csv, it's not the data.pak using winhex.
03/15/2008 12:45 Mastershouter#6
I know, I wrote in which folder i have to modify it! In the unpacked data.pak.
03/15/2008 12:47 darkyx#7
u need to modify ur boots speed
03/15/2008 23:40 Mastershouter#8
Quote:
Originally Posted by darkyx View Post
u need to modify ur boots speed
if u have no clue dont answer

thx
03/17/2008 03:14 kdreav#9
I was able to edit my speed and monsters speed, but I lag out within 5-10 secs. Any help?
03/21/2008 17:00 MnC2004#10
Quote:
Originally Posted by Mastershouter View Post
Normaly i dont bring up older threads, but in this case i have a question.

Yesterday i saw a speedvachacker on eudek. (He runs ubberfast and the mobs follow him that fast to) and he told me i have to edit my speed in the csv files.

So my question is where in the data.pak i have to search for it? In which folder i mean, not the offset for winhex. May somebody can help.
Dont know if that was me altho i think i was pretty much one of the first to use speedvac on EU Dekaron, but the thing is in EU dekaron(closed beta) its easy to create that speedvac.
You only had to do 2 things:
(only know the data.pak unpack method. AKA editing csv files)
1: open the maplist.csv and change the MoveSpeedFactor which is standard at 1 (This to increase your own speed)
2: open the monster.csv and change the RunSpeed on the monsters you want to have increased speed.

Usually its around a times 5 factor increment. So if you putt MoveSpeedFactor on 4 you should putt the RunSpeed in the monsters.csv on about 20 to 23.

NOTE:
This method works very well BUT it does make your game crash more than regular. For me it was about a 3 to 4 times crash an hour. But it easily made up for it with the speed :) luring only takes like 15 seconds to get a full lure.

NOTE 2:
This works on Dekaron EU Closed beta. On 2moons you can only change the speed of the monsters but if you change the MoveSpeedFactor you will get disconnected within 10 seconds as soon as you move :mad:.


Hope this helped a bit :)
03/21/2008 17:45 Mastershouter#11
already found it out. I just was wondering that editing maplist dont let u dc that often like on 2m.
03/22/2008 13:34 vorsakend#12
Quote:
Originally Posted by MnC2004 View Post
Dont know if that was me altho i think i was pretty much one of the first to use speedvac on EU Dekaron, but the thing is in EU dekaron(closed beta) its easy to create that speedvac.
You only had to do 2 things:
(only know the data.pak unpack method. AKA editing csv files)
1: open the maplist.csv and change the MoveSpeedFactor which is standard at 1 (This to increase your own speed)
2: open the monster.csv and change the RunSpeed on the monsters you want to have increased speed.

Usually its around a times 5 factor increment. So if you putt MoveSpeedFactor on 4 you should putt the RunSpeed in the monsters.csv on about 20 to 23.

NOTE:
This method works very well BUT it does make your game crash more than regular. For me it was about a 3 to 4 times crash an hour. But it easily made up for it with the speed :) luring only takes like 15 seconds to get a full lure.

NOTE 2:
This works on Dekaron EU Closed beta. On 2moons you can only change the speed of the monsters but if you change the MoveSpeedFactor you will get disconnected within 10 seconds as soon as you move :mad:.


Hope this helped a bit :)
this works for me on EU dekaron , i dc with that once or twice each hour , but on 2moons i dc every 5-10 seconds :D
I think that depends of the lag in game , on 2moons i have 300-600 ms and on EU dekaron i have 5-40 ms
03/22/2008 13:49 dandash#13
ty for speed