Login server (port 11002) problem

Hi,
I have a dns server running in Windows 7 Ultimate x86.
There is 1 server and 1 channel.
I use Copmuterkrank's serverfiles V2.
My FreeBSD version is 7.0.
I have set 1.5 GB of RAM for the server.

Everything is ok and the server is working, except this problem:

Every 1.5 - 2 hours, the port 11002 (login server) is closing.
I get this message in FreeBSD : Limiting closed port RST response from xxx to 200 packets/sec

I use [Only registered and activated users can see links. Click Here To Register...] to check my ports and all of them are fine except the 11002 port.

I tried to add these commands in /etc/sysctl.conf :
net.inet.tcp.blackhole=2 (default 0)
net.inet.udp.blackhole=1 (default 0)
net.inet.icmp.icmplim=50 (default 200)
The commands were added succesfully but with no result.

The only solution is to reboot my server, in order to get the 11002 port operational again.

Any ideas please??:confused:

@Metin2 Kinder:
muahaha, hab' ich doch gewusst das man mit den 0815 Windows Server / Windows x / nicht mehr als 300 Spieler hosten kann xD
~~~

if you reboot than "start" your mt2 server:
command: ps ax > /root/igorglock.txt
upload your igorglock.txt from /root/

after 1.5 - 2 hours:
command: ps ax > /root/igorglock2.txt
upload your igorglock2.txt from /root/

you forgot to use my commands?


if you reboot than "start" your mt2 server:
yourservername# ps ax > /root/igorglock.txt #you must write this!
upload your igorglock.txt from /root/

after 1.5 - 2 hours:
command: ps ax > /root/igorglock2.txt #you must write this!
upload your igorglock2.txt from /root/

Ok I realize that now, sry:D

I'll be back in 2 hours :P

Great, delete your old "post" (#edit => delete / Löschen)
Can you upload your start.sh, db_auth.sh and auth/auto.sh form your files folder?
I can't find the right "auto.sh" for auth_server ...

I'm waitig.

Here we go:

[Only registered and activated users can see links. Click Here To Register...]

shut your metin server down, reboot but dont "start" and upload this file into your files folder (db_auth.sh)

If it works now, press this botton: [Only registered and activated users can see links. Click Here To Register...]

I reboot but don't "start".
I put the db_auth.sh in the file folder /usr/rain
I start the server.
I get the following message:

[Only registered and activated users can see links. Click Here To Register...]

No one can connect to server.

Edit: But, hey, you know what? Thank you for your help anyway :)

ah, do that:

cd /usr/rain/auth && chmod 744 auth && chmod 744 auto.sh
cd ../db chmod 744 db && chmod 744 auto.sh

;-) than it must works

Perhaps you forgot "&&" in db command?

[Only registered and activated users can see links. Click Here To Register...]

With "&&" the command is ok but when I type
./start or sh start... well, you see...:confused:

do this again:

cd /usr/rain/auth && chmod 744 auth && chmod 744 auto.sh
[PRESS ENTER]
cd ../db && chmod 744 db && chmod 744 auto.sh
[PRESS ENTER]
cd ..

now you can start.

type:
cd /root/
and then start :)

Igor
#reportet doppelpost =D

I set the rights in 777 in the entire "rain" folder.
That seemed to work. The server is on again and I'm going to wait another hour to see if the 11002 port is going to close.

The server is now working with your db_auth.sh Igor.

Again thnx for the help. I'll update you later about anything new..


Edit: On for 3.5 hours and the port still open, everything operational. 102 connected clients.

I'll update tommorow

Edit2:Server on from 1:15 a.m. - 11:15 a.m. 10 hours straight, no interferance, no closed port, no log in problems, everything normal.
Thank you Igor, you literaly saved my server <3:):)