Im just wondering if it is possible to have muliticlient in this game? if u have would u mind to share it to us? thanks ; )
Multiclient
05/28/2007 03:02
jhiln#1
05/28/2007 03:10
DM2000#2
Hi,
Did not see anyone on Multi-client yet.
And it is already lag without MC :P
DM
Did not see anyone on Multi-client yet.
And it is already lag without MC :P
DM
05/29/2007 09:21
jhiln#3
yeah i noticed it.. lol... ; ) but now it comes worst, coz HO are asking for payments for bot.. I can't bot mine now till after 31. ; )
06/06/2007 06:16
noobforever#4
Hello everyone, this entire guide has been rewritten to make it like (Vmware for dummies) =).
Now comes in a program called Vmware, it is a virtual PC software that makes virtual computers inside your current system, and is the only Vm product to support Direct3d, which is needed to run all the games
To download Vmware go to this site [Only registered and activated users can see links. Click Here To Register...] and on the bottom left corner of the page is a search box, type in Vmware and click on VMware-workstation-5.5.3-34685.exe you will see link at the bottom for both the main program and the key generator.
(some people use the browsers search feature.. that is not it so ignore it..)
Now thats enough of the introduction .. now on to the guide
Please make sure you have the following stuff ready ..
Windows XP Professional CD/Image (everyone who uses XP has this .. if i see someone don't have I'm going to laugh ..),
VMware-workstation-5.5.3-34685.exe with the key generator.
Now that you got those ready time to install Vmware, now its pretty understandable, Open the keygen when it asks for the serial in one of the boxes where it shows name etc and copy and paste it, and when you finish installing do not register the software just ignore it,
now that the software is installed we move on to the creation of the virtual machine.
Now open the program, you should now see 3 big buttons,
the only one you need to click on now is (New Virtual Machine),
once you have opened it you will be brought to a wizard, so click next,
you will now see a configuration type, select (Typical) <-- I personally don't use this one,
Now this is where you select your operating system,
its already selected on Windows so just pick (Windows XP professional) from the drop down list,
You will now arrive at the next page which is the naming of the virtual machine, leave it on the default
( Windows XP Professional ) since all my bots/scripts use this name to focus the window.
Now as for the location, you can leave it as default if you want.. we will need to go there later so remember it.
Now we are on the networking page, select the middle option
( Use network address translation (NAT), and press next.
Now we are on the virtual disk settings, for the disk size, put 8.0gb(this is enough),
and for the option check boxes select (Allocate Disk Space Now) and press next,
it will now set up the disk, it will take around 5 min or more.
Once thats done it brings you back to the main program window with the virtual machine controls,
click on (Edit virtual machine settings), and then you should see all the devices,
click on CD-ROM and on the right side of the window you will see 2 types of options you will be using,
(Use Physical Drive) if you have the CD
Or
(Use ISO Image) if you have the .iso,bin,cue or whatever the extension it uses.
select one and follow the directions.
once you have done that, press OK to save the settings and close Vmware,
(it auto loads last used so its good)
We will now enable Direct 3d support
remember that location i told you to remember .. you will need to go there now,
which should be,
C:\Documents and Settings\username\My Documents\My Virtual Machines\Windows XP Professional\
Once you are there open a file called (Windows XP Professional.vmx) in notepad/wordpad
and you will see a (nvram = "Windows XP Professional.nvram") somewhere at the bottom you will need to add 2 lines under this .. so it looks like this,
nvram = "Windows XP Professional.nvram"
mks.enable3d = "TRUE"
svga.vramSize = "67108864"
now thats done .. save the file and close it.
Open up Vmware now and make sure you have the cd/image in or loaded and start the virtual machine,
from here on its just like reinstalling windows .. i wont need to explain it .. just make sure to install
Vmware tools from the (VM) menu once you installed windows and your ON THE DESKTOP
since it is a program, now that should be about it .. hopefully no one should have trouble using it now.
Just to add some important info about resolutions, the game uses 1024x768 while the VM uses a lower one and the game will not run, you will need to click on (View) and De select (Auto fit Window/Guest)
this will stop it from changing the resolution automatically after you changed it in the display properties, so thats it ...
So here is ure multiclient,just u need to make it
Now comes in a program called Vmware, it is a virtual PC software that makes virtual computers inside your current system, and is the only Vm product to support Direct3d, which is needed to run all the games
To download Vmware go to this site [Only registered and activated users can see links. Click Here To Register...] and on the bottom left corner of the page is a search box, type in Vmware and click on VMware-workstation-5.5.3-34685.exe you will see link at the bottom for both the main program and the key generator.
(some people use the browsers search feature.. that is not it so ignore it..)
Now thats enough of the introduction .. now on to the guide
Please make sure you have the following stuff ready ..
Windows XP Professional CD/Image (everyone who uses XP has this .. if i see someone don't have I'm going to laugh ..),
VMware-workstation-5.5.3-34685.exe with the key generator.
Now that you got those ready time to install Vmware, now its pretty understandable, Open the keygen when it asks for the serial in one of the boxes where it shows name etc and copy and paste it, and when you finish installing do not register the software just ignore it,
now that the software is installed we move on to the creation of the virtual machine.
Now open the program, you should now see 3 big buttons,
the only one you need to click on now is (New Virtual Machine),
once you have opened it you will be brought to a wizard, so click next,
you will now see a configuration type, select (Typical) <-- I personally don't use this one,
Now this is where you select your operating system,
its already selected on Windows so just pick (Windows XP professional) from the drop down list,
You will now arrive at the next page which is the naming of the virtual machine, leave it on the default
( Windows XP Professional ) since all my bots/scripts use this name to focus the window.
Now as for the location, you can leave it as default if you want.. we will need to go there later so remember it.
Now we are on the networking page, select the middle option
( Use network address translation (NAT), and press next.
Now we are on the virtual disk settings, for the disk size, put 8.0gb(this is enough),
and for the option check boxes select (Allocate Disk Space Now) and press next,
it will now set up the disk, it will take around 5 min or more.
Once thats done it brings you back to the main program window with the virtual machine controls,
click on (Edit virtual machine settings), and then you should see all the devices,
click on CD-ROM and on the right side of the window you will see 2 types of options you will be using,
(Use Physical Drive) if you have the CD
Or
(Use ISO Image) if you have the .iso,bin,cue or whatever the extension it uses.
select one and follow the directions.
once you have done that, press OK to save the settings and close Vmware,
(it auto loads last used so its good)
We will now enable Direct 3d support
remember that location i told you to remember .. you will need to go there now,
which should be,
C:\Documents and Settings\username\My Documents\My Virtual Machines\Windows XP Professional\
Once you are there open a file called (Windows XP Professional.vmx) in notepad/wordpad
and you will see a (nvram = "Windows XP Professional.nvram") somewhere at the bottom you will need to add 2 lines under this .. so it looks like this,
nvram = "Windows XP Professional.nvram"
mks.enable3d = "TRUE"
svga.vramSize = "67108864"
now thats done .. save the file and close it.
Open up Vmware now and make sure you have the cd/image in or loaded and start the virtual machine,
from here on its just like reinstalling windows .. i wont need to explain it .. just make sure to install
Vmware tools from the (VM) menu once you installed windows and your ON THE DESKTOP
since it is a program, now that should be about it .. hopefully no one should have trouble using it now.
Just to add some important info about resolutions, the game uses 1024x768 while the VM uses a lower one and the game will not run, you will need to click on (View) and De select (Auto fit Window/Guest)
this will stop it from changing the resolution automatically after you changed it in the display properties, so thats it ...
So here is ure multiclient,just u need to make it
07/04/2008 03:54
johlin1#5
HELLO:D sombady know wer i can donload free hero online bot:D.
08/11/2008 19:43
qfreer#6
hi noobforeverQuote:
Hello everyone, this entire guide has been rewritten to make it like (Vmware for dummies) =).
Now comes in a program called Vmware, it is a virtual PC software that makes virtual computers inside your current system, and is the only Vm product to support Direct3d, which is needed to run all the games
To download Vmware go to this site [Only registered and activated users can see links. Click Here To Register...] and on the bottom left corner of the page is a search box, type in Vmware and click on VMware-workstation-5.5.3-34685.exe you will see link at the bottom for both the main program and the key generator.
(some people use the browsers search feature.. that is not it so ignore it..)
Now thats enough of the introduction .. now on to the guide
Please make sure you have the following stuff ready ..
Windows XP Professional CD/Image (everyone who uses XP has this .. if i see someone don't have I'm going to laugh ..),
VMware-workstation-5.5.3-34685.exe with the key generator.
Now that you got those ready time to install Vmware, now its pretty understandable, Open the keygen when it asks for the serial in one of the boxes where it shows name etc and copy and paste it, and when you finish installing do not register the software just ignore it,
now that the software is installed we move on to the creation of the virtual machine.
Now open the program, you should now see 3 big buttons,
the only one you need to click on now is (New Virtual Machine),
once you have opened it you will be brought to a wizard, so click next,
you will now see a configuration type, select (Typical) <-- I personally don't use this one,
Now this is where you select your operating system,
its already selected on Windows so just pick (Windows XP professional) from the drop down list,
You will now arrive at the next page which is the naming of the virtual machine, leave it on the default
( Windows XP Professional ) since all my bots/scripts use this name to focus the window.
Now as for the location, you can leave it as default if you want.. we will need to go there later so remember it.
Now we are on the networking page, select the middle option
( Use network address translation (NAT), and press next.
Now we are on the virtual disk settings, for the disk size, put 8.0gb(this is enough),
and for the option check boxes select (Allocate Disk Space Now) and press next,
it will now set up the disk, it will take around 5 min or more.
Once thats done it brings you back to the main program window with the virtual machine controls,
click on (Edit virtual machine settings), and then you should see all the devices,
click on CD-ROM and on the right side of the window you will see 2 types of options you will be using,
(Use Physical Drive) if you have the CD
Or
(Use ISO Image) if you have the .iso,bin,cue or whatever the extension it uses.
select one and follow the directions.
once you have done that, press OK to save the settings and close Vmware,
(it auto loads last used so its good)
We will now enable Direct 3d support
remember that location i told you to remember .. you will need to go there now,
which should be,
C:Documents and SettingsusernameMy DocumentsMy Virtual MachinesWindows XP Professional
Once you are there open a file called (Windows XP Professional.vmx) in notepad/wordpad
and you will see a (nvram = "Windows XP Professional.nvram") somewhere at the bottom you will need to add 2 lines under this .. so it looks like this,
nvram = "Windows XP Professional.nvram"
mks.enable3d = "TRUE"
svga.vramSize = "67108864"
now thats done .. save the file and close it.
Open up Vmware now and make sure you have the cd/image in or loaded and start the virtual machine,
from here on its just like reinstalling windows .. i wont need to explain it .. just make sure to install
Vmware tools from the (VM) menu once you installed windows and your ON THE DESKTOP
since it is a program, now that should be about it .. hopefully no one should have trouble using it now.
Just to add some important info about resolutions, the game uses 1024x768 while the VM uses a lower one and the game will not run, you will need to click on (View) and De select (Auto fit Window/Guest)
this will stop it from changing the resolution automatically after you changed it in the display properties, so thats it ...
So here is ure multiclient,just u need to make it
er i got some error when i start hero
here is what i get do you know how to fix it ??
[Only registered and activated users can see links. Click Here To Register...]
hope you'll give me some advise soon thank you very much
08/15/2008 03:31
Childish#7
That's kinda long, I am downloading the client ATM, I'll check out the .exeQuote:
Now comes in a program called Vmware, it is a virtual PC software that makes virtual computers inside your current system, and is the only Vm product to support Direct3d, which is needed to run all the games
To download Vmware go to this site [Only registered and activated users can see links. Click Here To Register...] and on the bottom left corner of the page is a search box, type in Vmware and click on VMware-workstation-5.5.3-34685.exe you will see link at the bottom for both the main program and the key generator.
(some people use the browsers search feature.. that is not it so ignore it..)
Now thats enough of the introduction .. now on to the guide
Please make sure you have the following stuff ready ..
Windows XP Professional CD/Image (everyone who uses XP has this .. if i see someone don't have I'm going to laugh ..),
VMware-workstation-5.5.3-34685.exe with the key generator.
Now that you got those ready time to install Vmware, now its pretty understandable, Open the keygen when it asks for the serial in one of the boxes where it shows name etc and copy and paste it, and when you finish installing do not register the software just ignore it,
now that the software is installed we move on to the creation of the virtual machine.
Now open the program, you should now see 3 big buttons,
the only one you need to click on now is (New Virtual Machine),
once you have opened it you will be brought to a wizard, so click next,
you will now see a configuration type, select (Typical) <-- I personally don't use this one,
Now this is where you select your operating system,
its already selected on Windows so just pick (Windows XP professional) from the drop down list,
You will now arrive at the next page which is the naming of the virtual machine, leave it on the default
( Windows XP Professional ) since all my bots/scripts use this name to focus the window.
Now as for the location, you can leave it as default if you want.. we will need to go there later so remember it.
Now we are on the networking page, select the middle option
( Use network address translation (NAT), and press next.
Now we are on the virtual disk settings, for the disk size, put 8.0gb(this is enough),
and for the option check boxes select (Allocate Disk Space Now) and press next,
it will now set up the disk, it will take around 5 min or more.
Once thats done it brings you back to the main program window with the virtual machine controls,
click on (Edit virtual machine settings), and then you should see all the devices,
click on CD-ROM and on the right side of the window you will see 2 types of options you will be using,
(Use Physical Drive) if you have the CD
Or
(Use ISO Image) if you have the .iso,bin,cue or whatever the extension it uses.
select one and follow the directions.
once you have done that, press OK to save the settings and close Vmware,
(it auto loads last used so its good)
We will now enable Direct 3d support
remember that location i told you to remember .. you will need to go there now,
which should be,
C:Documents and SettingsusernameMy DocumentsMy Virtual MachinesWindows XP Professional
Once you are there open a file called (Windows XP Professional.vmx) in notepad/wordpad
and you will see a (nvram = "Windows XP Professional.nvram") somewhere at the bottom you will need to add 2 lines under this .. so it looks like this,
nvram = "Windows XP Professional.nvram"
mks.enable3d = "TRUE"
svga.vramSize = "67108864"
now thats done .. save the file and close it.
Open up Vmware now and make sure you have the cd/image in or loaded and start the virtual machine,
from here on its just like reinstalling windows .. i wont need to explain it .. just make sure to install
Vmware tools from the (VM) menu once you installed windows and your ON THE DESKTOP
since it is a program, now that should be about it .. hopefully no one should have trouble using it now.
Just to add some important info about resolutions, the game uses 1024x768 while the VM uses a lower one and the game will not run, you will need to click on (View) and De select (Auto fit Window/Guest)
this will stop it from changing the resolution automatically after you changed it in the display properties, so thats it ...
So here is ure multiclient,just u need to make it
08/19/2008 10:07
DM2000#8
I am playing the game.
I did not have 2 accounts.. therefore, did not try.
I guess the game need a lot of resources. May need more memory..
I did not have 2 accounts.. therefore, did not try.
I guess the game need a lot of resources. May need more memory..
08/19/2008 11:56
qfreer#9
yoyoyo :D
im from Singapore too lol
if need help for the game find me in game i try my best to help you ^-^
IGN : ********
im from Singapore too lol
if need help for the game find me in game i try my best to help you ^-^
IGN : ********
12/16/2008 18:23
smurfdiety#10
here, i made a guide on this site. check it out =)
[Only registered and activated users can see links. Click Here To Register...]
EDIT: the stars r supposed to say "**************"
EDIT (again): u know what? nvm the link. here
Let me know if this has been said before, but as far as I know, I'm the only one who knows about this.
1. Make both accounts
2. open hero, but dont log in. press "start game", but stop at the log in screen
3. open task manager
4. search processes, find "Launcher.exe", and end the process (a warning will come up, just click yes)
5. run hero a second time
6. start the game, but stop at the login screen
7. go back to the task manager, and end "launcher.exe" again
8. now log in to both accounts at the same time/close to each other
**TIP holding alt then tab (Alt-Tab) will switch windows to make it easier to log into both accounts
this can be very useful as you can group level, powerlevel, or use the second account as storage or as a merchant.
[Only registered and activated users can see links. Click Here To Register...]
EDIT: the stars r supposed to say "**************"
EDIT (again): u know what? nvm the link. here
Let me know if this has been said before, but as far as I know, I'm the only one who knows about this.
1. Make both accounts
2. open hero, but dont log in. press "start game", but stop at the log in screen
3. open task manager
4. search processes, find "Launcher.exe", and end the process (a warning will come up, just click yes)
5. run hero a second time
6. start the game, but stop at the login screen
7. go back to the task manager, and end "launcher.exe" again
8. now log in to both accounts at the same time/close to each other
**TIP holding alt then tab (Alt-Tab) will switch windows to make it easier to log into both accounts
this can be very useful as you can group level, powerlevel, or use the second account as storage or as a merchant.
02/12/2009 09:14
jash03#11
hi im new ..when i go to the enfull.com and search the Vmware i didnt see the "VMware-workstation-5.5.3-34685.exe" ....i realy want a multi window of hero online....
hope u could help me tanks..
hope u could help me tanks..
02/12/2009 10:41
jash03#12
its me again i tested dual window using the taskbar method but when i open the 2 accnts its too laggy...pls give me some hints how toi make it more clearer...
tanks
tanks
07/24/2009 17:18
ax5#13
i have 3 hero online Windows on :)
08/05/2009 00:51
omgz0rg#14
want a easy way to MC? copy Hero online folder, make a shortcut of the launcher to your desktop and voila ! 2 clients ! both can be started at the same time... you can do this with every game
08/06/2009 11:44
schlat#15
why so complicated with vm or such things. just kill the launcher.exe process in the task manager and start the launcher again. or use my multiclient.