lolkop's sources please ?

since lolkop's link is broken or deleted i can't find the .au3 source of Auto Potion for ZSZC i need to edit it for me cuz i hate im typing and it says like 0000000000 i want to change it just to send 1 time not like 10times....

as far as I know, lolkops tools are outdated and he wont make more

Quote:

Originally Posted by aydooo Code: #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Compression=4 #AutoIt3Wrapper_Run_Tidy=y #AutoIt3Wrapper_Tidy_Stop_OnError=n #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** Opt("TrayMenuMode", 1) Dim $type[4] = ['HP', 'MP', 'Vigor', 'Pet' ] Dim $dif = 70, $y = 40, $run = 0, $pot_pill = 0, $e = 0, $s = 0, $z = 0 Const $epointer = 0xA9EE64, $eCharname = 0xA9DBB8, $spointer = 0xA9EE44, $sCharname = 0xA9DB98, $zpointer = 0xAA0E44, $zCharname = 0xA9FB98, $pill = 0x228, $curhp = 0x3BC, $maxhp = 0x3B4, $curmp = 0x3B0, $maxmp = 0x3B8 Const $h1 = 0x1718, $h2 = 0x8, $h3 = 0x4, $h4 = 0x10, $hcur = 0x8, $hmax = 0xC, $lvl = 0x12 Const $wolf_hp[140] = [360, 441, 524, 611, 701, 795, 892, 992, 1097, 1205, 1317, 1432, 1552, 1677, 1805, 1938, 2076, 2218, 2365, 2517, 2675, 2837, 3005, 3179, 3358, 3544, 3735, 3933, 4137, 4347, 4565, 4789, 5020, 5259, 5506, 5760, 6022, 6292, 6571, 6858, 7154, 7459, 7774, 8098, 8432, 8776, 9131, 9496, 9872, 10260, 10659, 11070, 11493, 11928, 12376, 12838, 13313, 13802, 14305, 14823, 15355, 15903, 16467, 17047, 17644, 18258, 18889, 19538, 20205, 20892, 21598, 22323, 23069, 23836, 24625, 25435, 26268, 27124, 28004, 28908, 29838, 30792, 31774, 32782, 33817, 34881, 35974, 37097, 38250, 39434, 40651, 41901, 43184, 44501, 45855, 47244, 48671, 50136, 51640, 53184, 54770, 56397, 58068, 59782, 61543, 63350, 65204, 67107, 69060, 71065, 73122, 75233, 77399, 79622, 81903, 84243, 86644, 89107, 91634, 94227, 96886, 99615, 102413, 105284, 108229, 111249, 114347, 117524, 120783, 124125, 127552, 131067, 134672, 138368, 142158, 146044, 150029, 154115, 158304, 162599] $GUI = GUICreate('AutoPot', 335, 370) GUICtrlCreateLabel('Charname:', 10, 13) $char_input = GUICtrlCreateInput('', 70, 10, 150) $start_button = GUICtrlCreateButton('Start Autopot', 235, 9, 85, 23) For $i = 0 To 3 GUICtrlCreateGroup($type[$i], 5, $y + $i * $dif, 325, 70) Assign($type[$i] & '_check', GUICtrlCreateCheckbox('Use ' & $type[$i] & ' Pots', 10, $y + 15 + $i * $dif)) GUICtrlCreateLabel('Belt:', 103, $y + 19 + $i * $dif) Assign($type[$i] & '_belt', GUICtrlCreateCombo('', 128, $y + 15 + $i * $dif, 40, -1, 3)) GUICtrlSetData(-1, 'none|F1|F2|F3|F4', 'F1') GUICtrlCreateLabel('Slot:', 180, $y + 19 + $i * $dif) Assign($type[$i] & '_slot', GUICtrlCreateCombo('', 205, $y + 15 + $i * $dif, 35, -1, 3)) GUICtrlSetData(-1, '0|1|2|3|4|5|6|7|8|9', 1) GUICtrlCreateLabel('Delay:', 255, $y + 19 + $i * $dif) Assign($type[$i] & '_delay', GUICtrlCreateInput('1000', 290, $y + 15 + $i * $dif, 35, -1, 3)) Assign($type[$i] & '_slider', GUICtrlCreateSlider(5, $y + 40 + $i * $dif, 295)) Assign($type[$i] & '_input', GUICtrlCreateInput(0, 300, $y + 40 + $i * $dif, 25, -1, 1)) Next GUICtrlCreateGroup('Universal Pills', 5, 320, 325, 45) $pill_check = GUICtrlCreateCheckbox('Use Abnormal State Recovery', 10, 335) GUICtrlCreateLabel('Belt:', 180, 340) $pill_belt = GUICtrlCreateCombo('', 205, 335, 40, -1, 3) GUICtrlSetData(-1, 'none|F1|F2|F3|F4', 'F1') GUICtrlCreateLabel('Slot:', 255, 340) $pill_slot = GUICtrlCreateCombo('', 280, 335, 35, -1, 3) GUICtrlSetData(-1, '0|1|2|3|4|5|6|7|8|9', 1) GUISetState() While 1 $msg = GUIGetMsg() If $msg = $char_input Then ini('read') EndIf If $msg = -3 Then Exit If $msg = -4 Then Tray() For $i = 0 To 3 If $msg = Eval($type[$i] & '_slider') Then GUICtrlSetData(Eval($type[$i] & '_input'), GUICtrlRead(Eval($type[$i] & '_slider'))) If $msg = Eval($type[$i] & '_input') Then GUICtrlSetData(Eval($type[$i] & '_slider'), GUICtrlRead(Eval($type[$i] & '_input'))) Next If $msg = $start_button Then If GUICtrlRead($start_button) = 'Start Autopot' Then GUICtrlSetData($start_button, 'Stop Autopot') $run = True ini() ElseIf GUICtrlRead($start_button) = 'Stop Autopot' Then GUICtrlSetData($start_button, 'Start Autopot') $run = False EndIf EndIf If $run Then If $e = 1 Then $pointer = $epointer ElseIf $s = 1 Then $pointer = $spointer Else $pointer = $zpointer EndIf $mid = memopen(WinGetProcess(GetHandle(GUICtrlRead($char_input)))) $HP_percent = memreaddynamic($mid, $pointer, $curhp) / memreaddynamic($mid, $pointer, $maxhp) * 100 $MP_percent = memreaddynamic($mid, $pointer, $curmp) / memreaddynamic($mid, $pointer, $maxmp) * 100 $Vigor_percent = memreaddynamic($mid, $pointer, $curhp) / memreaddynamic($mid, $pointer, $maxhp) * 100 $1 = memread($mid, $pointer) + $h1 $2 = memread($mid, $1) + $h2 $3 = memread($mid, $2) + $h3 $4 = memread($mid, $3) + $h4 $horsecur = memreaddynamic($mid, $4, $hcur) $horselvl = memreaddynamic($mid, $4, $lvl, 'byte') If $horselvl = 0 Then $horsemax = memreaddynamic($mid, $4, $hmax) ElseIf $horselvl > 0 And $horselvl <= 140 Then $horsemax = $wolf_hp[$horselvl - 1] Else $horsemax = 0 EndIf If $horsemax <> 0 Then $Pet_percent = $horsecur / $horsemax * 100 Else $Pet_percent = 0 EndIf $status = memreaddynamic($mid, $pointer, $pill, "byte") For $i = 0 To 5 If BitAND($status, 2 ^ $i) Then $pot_pill = 1 Next If GUICtrlRead(Eval($type[0] & '_check')) = 1 And Eval($type[0] & '_percent') <= GUICtrlRead(Eval($type[0] & '_input')) And Eval($type[0] & '_percent') <> 0 And BitAND($status, 2 ^ 5) <> 1 Then Pot(GUICtrlRead($char_input), GUICtrlRead(Eval($type[0] & '_belt')), GUICtrlRead(Eval($type[0] & '_slot')), GUICtrlRead(Eval($type[0] & '_delay'))) EndIf For $i = 0 To 3 If GUICtrlRead(Eval($type[$i] & '_check')) = 1 And Eval($type[$i] & '_percent') <= GUICtrlRead(Eval($type[$i] & '_input')) And Eval($type[$i] & '_percent') <> 0 Then If $i = 0 Or $i = 2 Then If Not BitAND($status, 2 ^ 5) Then Pot(GUICtrlRead($char_input), GUICtrlRead(Eval($type[$i] & '_belt')), GUICtrlRead(Eval($type[$i] & '_slot')), GUICtrlRead(Eval($type[$i] & '_delay'))) Else Pot(GUICtrlRead($char_input), GUICtrlRead(Eval($type[$i] & '_belt')), GUICtrlRead(Eval($type[$i] & '_slot')), GUICtrlRead(Eval($type[$i] & '_delay'))) EndIf EndIf Next If GUICtrlRead($pill_check) = 1 And $pot_pill Then Pot(GUICtrlRead($char_input), GUICtrlRead($pill_belt), GUICtrlRead($pill_slot), 1000) EndIf memclose($mid) $pot_pill = 0 EndIf Switch TrayGetMsg() Case - 13 Tray() EndSwitch WEnd Func Tray() If BitAND(WinGetState($GUI), 2) Then WinSetState($GUI, "", @SW_HIDE) Else WinSetState($GUI, "", @SW_SHOW) EndIf EndFunc ;==>Tray Func SendSro($handle, $key) Switch $key Case "F1" $k = 0x70 Case "F2" $k = 0x71 Case "F3" $k = 0x72 Case "F4" $k = 0x73 Case Else $k = 0x30 + $key EndSwitch For $i = 1 To 5 DllCall("User32.dll", "int", "PostMessageA", "hwnd", $handle, "int", 0x100, "int", $k, "int", 0) DllCall("User32.dll", "int", "PostMessageA", "hwnd", $handle, "int", 0x101, "int", $k, "int", 0) Next EndFunc ;==>SendSro Func GetHandle($char) Local $list = WinList("[CLASS:CLIENT]") For $i = 1 To $list[0][0] Local $mid = memopen(WinGetProcess($list[$i][1])) Local $name = memread($mid, $eCharname, 'char[12]') If $name = $char Then memclose($mid) Global $e = 1 Global $s = 0 Global $z = 0 Return $list[$i][1] EndIf Local $name = memread($mid, $sCharname, 'char[12]') If $name = $char Then memclose($mid) Global $s = 1 Global $e = 0 Global $z = 0 Return $list[$i][1] EndIf Local $name = memread($mid, $zCharname, 'char[12]') If $name = $char Then memclose($mid) Global $s = 0 Global $e = 0 Global $z = 1 Return $list[$i][1] EndIf memclose($mid) Next EndFunc ;==>GetHandle Func ini($action = 'write') If $action = 'write' Then For $i = 0 To 3 IniWrite('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_check', GUICtrlRead(Eval($type[$i] & '_check'))) IniWrite('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_belt', GUICtrlRead(Eval($type[$i] & '_belt'))) IniWrite('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_slot', GUICtrlRead(Eval($type[$i] & '_slot'))) IniWrite('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_input', GUICtrlRead(Eval($type[$i] & '_input'))) IniWrite('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_slider', GUICtrlRead(Eval($type[$i] & '_slider'))) Next IniWrite('pot_config.ini', GUICtrlRead($char_input), 'pill_check', GUICtrlRead($pill_check)) IniWrite('pot_config.ini', GUICtrlRead($char_input), 'pill_belt', GUICtrlRead($pill_belt)) IniWrite('pot_config.ini', GUICtrlRead($char_input), 'pill_slot', GUICtrlRead($pill_slot)) Else For $i = 0 To 3 GUICtrlSetState(Eval($type[$i] & '_check'), IniRead('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_check', GUICtrlRead(Eval($type[$i] & '_check')))) GUICtrlSetData(Eval($type[$i] & '_belt'), IniRead('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_belt', GUICtrlRead(Eval($type[$i] & '_belt')))) GUICtrlSetData(Eval($type[$i] & '_slot'), IniRead('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_slot', GUICtrlRead(Eval($type[$i] & '_slot')))) GUICtrlSetData(Eval($type[$i] & '_input'), IniRead('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_input', GUICtrlRead(Eval($type[$i] & '_input')))) GUICtrlSetData(Eval($type[$i] & '_slider'), IniRead('pot_config.ini', GUICtrlRead($char_input), $type[$i] & '_slider', GUICtrlRead(Eval($type[$i] & '_slider')))) Next GUICtrlSetState($pill_check, IniRead('pot_config.ini', GUICtrlRead($char_input), 'pill_check', GUICtrlRead($pill_check))) GUICtrlSetData($pill_belt, IniRead('pot_config.ini', GUICtrlRead($char_input), 'pill_belt', GUICtrlRead($pill_belt))) GUICtrlSetData($pill_slot, IniRead('pot_config.ini', GUICtrlRead($char_input), 'pill_slot', GUICtrlRead($pill_slot))) EndIf EndFunc ;==>ini Func Pot($name, $bar, $slot, $delay = 1000) If Not IsDeclared($name & "pot" & $slot) Then If $bar <> 'none' Then SendSro(GetHandle($name), $bar) SendSro(GetHandle($name), $slot) Assign($name & "pot" & $slot, TimerInit(), 2) ElseIf TimerDiff(Eval($name & "pot" & $slot)) > $delay Then If $bar <> 'none' Then SendSro(GetHandle($name), $bar) SendSro(GetHandle($name), $slot) Assign($name & "pot" & $slot, TimerInit(), 2) EndIf EndFunc ;==>Pot Func memopen($pid) Local $mid = DllCall('kernel32.dll', 'int', 'OpenProcess', 'int', 0x1F0FFF, 'int', 1, 'int', $pid) Return $mid[0] EndFunc ;==>memopen Func memread($mid, $adress, $type = 'dword') Local $struct = DllStructCreate($type) DllCall('kernel32.dll', 'int', 'ReadProcessMemory', 'int', $mid, 'int', $adress, 'ptr', DllStructGetPtr($struct), 'int', DllStructGetSize($struct), 'int', '') Return DllStructGetData($struct, 1) EndFunc ;==>memread Func memreaddynamic($mid, $pointer, $offset, $type = "dword") $newadress = memread($mid, $pointer) + $offset Return memread($mid, $newadress, $type) EndFunc ;==>memreaddynamic Func memclose($mid) DllCall('kernel32.dll', 'int', 'CloseHandle', 'int', $mid) EndFunc ;==>memclose

THX dude, where did you get it ? Saved on ur pc or Decompiled the app ?

Quote:

Originally Posted by PortalDark as far as I know, lolkops tools are outdated and he wont make more

Well the Autopotion works in ZSZC so..