[Help] Mein WoW Server. [Help]

10/14/2010 11:14 .1337.#1
Hi community

ich wollte meinen server Online Bringen hab auch erfahrung und so.
aber wenn mein Freund connecten will kommt er zur Realmauswahl und wählt
den Realm aus und dann steht : In Realm einloggen ....
und weiter gehts nicht .

ich habe Folgende Ports Geöffnet und in der Firewall freigegeben:

8085
3724
8093
8129

UDP und TCP

Bitte um Hilfe.

Hier meine Configuration:
Logon.conf

Code:
/***********************************************************************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
***********************************************************************
* Configure the logonserver to connect to the accounts database below *
***********************************************************************
* LogonDatabase.Host      - The hostname that the database is located on
* LogonDatabase.Username  - The username used for the mysql connection
* LogonDatabase.Password  - The password used for the mysql connection
* LogonDatabase.Name      - The database name
* LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type      - Client to use. 1 = MySQL 
* Not supported:          - 2 = PostgreSQL (Partly implemented)
* Not Supported:          - 3 = SQLite (unimplemented)
***********************************************************************/

<LogonDatabase Hostname = "127.0.0.1"
               Username = "root"
               Password = "deutsch"
               Name     = "logon"
               Port     = "3306"
               Type     = "1">


/* Host Directive
*
*    This is the address that the realmlist will listen on.
*    To listen on all addresses, set it to 0.0.0.0
*    Default: 127.0.0.1 (localhost)
*
*    Note: ISHost is the interserver communication listener.
*/

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

/* Server console logging level
*
*    This directive controls how much output the server will
*    display in it's console. Set to 0 for none.
*    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
*    Default: 3
*/

<LogLevel Screen = "0"
          File = "-1">

/* Account Refresh Time
*
*    This controls on which time interval accounts gets 
*    refreshed. (In seconds)
*    Default = 600 
*    600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*    
*/

<Rates AccountRefresh = "600">

/* WorldServer Setup
*
*  RemotePassword
*    This directive controls the password used to authenticate with the worldserver.
*    It must be the same between the two configs. If it is not, your server will
*    not register.
*
*    Default: "change_me_logon"
*
*  AllowedIPs
*    This section MUST be completed, otherwise all attempts to link your servers will fail.
*    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
*    to make server connections to your logonserver, and register realms.
*    For example, everything in the 127.0.0.* range would be:
*         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
*    To allow a single IP,
*         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
*  AllowedModIPs
*    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
*    (adding bans, GMs, account permissions, etc)
*/

<LogonServer RemotePassword = "change_me"
             AllowedIPs = "127.0.0.1/24"
             AllowedModIPs = "127.0.0.1/24">
Und Realm.conf:
Code:
/***********************************************************************
* ArcEmu Realms Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's Realms below
***********************************************************************/

/******************************************************
* LogonServer Section
*
*    Address:
*      The address (no port) of the server.
*
*    Port:
*      The port on which the logon server listens. (*** NOT 3724 ***)
*
*    Name:
*      Not really relavant, but name the logon.
*
*    RealmCount:
*      The number of realms in the next section.
*
******************************************************/

<LogonServer Address = "127.0.0.1"
    Port = "8093"
    Name = "Default Logon"
    RealmCount = "1">

/******************************************************
* Realm Section
*
*    Name:
*      The name of the realm.
*    
*    Address:
*      The address (and port) of that realm.
*
*    Icon:
*      The type of realm (PVP, Normal, RPPVP, RP)
*
*    TimeZone:
*      The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, 
*       5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
*
*    Population:
*      (0 = low, 1 = medium, 2 = high)
*
*   Important information below
*
*     change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
*     This issues come up a lot!
*
*     Timezone values :
*    0=Korean                                16=China
*    1=Development                17=CN1
*    2=United States                18=CN2
*    3=Oceanic                19=CN3
*    4=Latin America                20=CN4
*    5=Tournament                21=CN5
*    6=Korean                22=CN6
*    8=English                23=CN7
*    9=German                24=CN8
*    10=French                25=Tournament
*    11=Spanish                26=Test Server
*    12=Russian                27=Tournament
*    13=Tournament                28=QA Server
*    14=Taiwan                29=CN9
*    15=Tournament                30=TestServer2
******************************************************/

<Realm1 Name = "ArcEmu OneClick(R)"
    Address = "kswow.dyndns.biz:8129" 
    Icon = "PVP"
    Population = "1.0"
    TimeZone = "1">
Ja ich habe im Router Freigegeben .
10/14/2010 16:07 azzarrel#2
"127.0.0.1"
muss durch deine Hamachi-Ip/Server-ip ersetzt werden.
10/14/2010 16:14 jonny5252#3
Quote:
Originally Posted by .1337. View Post
3 Stunden für ne Antwort und immer noch keine. :(
hoffentlich wird das heute noch was .
Sei doch froh das dir hier überhaupt geholfen wird.
10/14/2010 22:24 тσgα#4
haste im Router ports freigegeben ?