Also ich leech mal en bischen von Curse X
Gleich im vorraus da ist einiger älteres dabei und gemische zwischen Koreanischer und Internationaler Version
[tut]Warrock HAcks using Wpe
--------------------------------------------------------------------------------
WPE Tutorial
--------------------------------------------------------------------------------
Setting Up WPE Pro
Save it somewhere on your PC.
Open WPE Pro and click on "View" then "Options" and set the Max Packets to 500, and unceck all but "Send."
OK the settings and exit out of WPE Pro.
Ammo/Health
Have WarRock running, be in a game, and open up WPE Pro and select WarRock as the target process.
[Health]
Jump off a building and hurt yourself, then go to the nearest health stand and wait until you get to about 70%, then start recording packets.
[Ammo]
Fire a full round of ammunition and go to the nearest ammo stand and wait until you get to about 70%, then start recording packets.
[Both]
As soon as your heal or restock your ammo, Alt+Tab to WPE Pro and stop recording packets. If you have done this right you shouldn't have had to record hardly any packets at all, but the ammount you record will depend upon the number of people in the game.
Since you just healed/restocked the packets should be near the end, scroll down to the bottom of the new window that appeared and start scrolling up. The packet you are looking for should be size 38-40.
Right-click the packet and click on "Add to Send List", then right-click it again and click on "Set Send List with this Socket ID."
Next to the "Filter" tab there is a "Send" tab, click it and you should see the packet you added to the "Send List." Double-click the packet (that is in the send list) and rename it to health/ammo depending upon which you are doing. Now, click on the box to check the packet and click the play button right above it.
The new window will ask you if you want to send it continuously or one time, and how often. Set this to continuously every 1000 ms, and click the play button.
Minimize WPE Pro and enjoy.
Flag Capture
Have WarRock running, be in a game, and open up WPE Pro and select WarRock as the target process.
Walk up to a flag and let it get to about 70%, then start recording packets. As soon as you capture it stop recording packets. The size of the packet should be 38-40.
Right-click the packet and click on "Add to Send List", then right-click it again and click on "Set Send List with this Socket ID."
Next to the "Filter" tab there is a "Send" tab, click it and you should see the packet you added to the "Send List." Double-click the packet (that is in the send list) and rename it to CTF. Now, click on the box to check the packet and click the play button right above it.
The new window will ask you if you want to send it continuously or one time, and how often. Set this to continuously every 1000 ms, and click the play button.
Minimize WPE Pro and enjoy.
SpawnKill
Have WarRock running, be in a game, and open up WPE Pro and select WarRock as the target process.
Start recording packets and be prepared to kill someone. As soon as you kill them stop recording packets. The size of the packet should be 100 or 105.
Right-click the packet and click on "Add to Send List", then right-click it again and click on "Set Send List with this Socket ID."
Next to the "Filter" tab there is a "Send" tab, click it and you should see the packet you added to the "Send List." Double-click the packet (that is in the send list) and rename it to SK. Now, click on the box to check the packet and click the play button right above it.
The new window will ask you if you want to send it continuously or one time, and how often. Set this to continuously every 1000 ms, and click the play button.
Minimize WPE Pro and enjoy.
Invisible
Have WarRock running, be in a game, and open up WPE Pro and select WarRock as the target process.
Start recording packets and go get yourself killed (not suicide). As soon as you die stop recording packets. The size of the packet should be 37-39.
Right-click the packet and click on "Add to Send List", then right-click it again and click on "Set Send List with this Socket ID."
Next to the "Filter" tab there is a "Send" tab, click it and you should see the packet you added to the "Send List." Double-click the packet (that is in the send list) and rename it to Invisible. Now, click on the box to check the packet and click the play button right above it.
The new window will ask you if you want to send it continuously or one time, and how often. Set this to continuously every 1000 ms, and click the play button.
Minimize WPE Pro and enjoy.
-Zame
NEW and improved Warrock hack!
How to install:
unpack all 3 files into the Nexon\WarRock\System folder
then just run the game as normal.
[Only registered and activated users can see links. Click Here To Register...]
how to use the trainers hotkeys are explained in the .txt file!
__________________
Invisible Hack
To do the invisible hack, your first going to need WPE Pro, which I uploaded here:
[Only registered and activated users can see links. Click Here To Register...]
1. Turn off your virus protectors, because it will detect WPE Pro as a virus.
2. Extract WPE Pro, and the .dll to a folder, preferably your desktop.
3. Open up WPE and go to View> Options, and uncheck everything except 'Send'.
4. Get a bypass (Look around for one)
5. Open up WarRock
6. Alt+Tab to WPE Pro. On WPE Pro, click the arrow next to target program, and click Warrock.exe
Now for the actual hacking:
1. Get into a game, and go to a base that's farthest away from the enemy
2. Alt+Tab back to WPE Pro, and click the black arrow.
3. Press F4 to suicide
4. Quickly go back to WPE Pro, and press red square (stop button)
5. In the window that pops up, go all the way down to the bottom, and (I'm doing this off the top of my head) I think it should be size 32.
6. Right click, and press add to send list, and set send list with this socket id.
7. In the bottom left, click the send tab.
8. Check the box in the send list, next to New Send.
9. Press the arrow
10. Do Continuously, 100 milliseconds, open socket, and press the arrow on that window.
11. Now you should be invisible and no one will see you when you respawn.
If you need any help, I'd be glad to help you.
Note: Make sure you respawn at the base farthest from the enemies, because your player will still be at the location you respawned, but you'll actually be walking around, which is why no one can see you.
Weapon unlock Tutorial
This one is realy realy old i known it for ages but have been to lazy to write a tutorial for it.
things needed:
Cheatengine 5.2
go in game start Cheatengine select the warrock process.
choose sniper as char
equip sniper rifle and go to CE search for 23 (2 bytes)
when search is done go in game change weapon to the pistol and go to CE
search value 2
repeat until you have less than 5 addresses
equip sniper rifle and look at the values you should see 23 at them.
try change the value on the addresses 1 by 1 to 40.
when you see the weapon name change to Flashbang in the game you know you have the right address
the range for the weapon values are 0 - 60
Want Invatation Code ... Here you go
[Only registered and activated users can see links. Click Here To Register...]
Scan it if you want, no viruses. I didn't make this, i found it on the internet.
Directions :
1. Download, then open the .exe
2. Once the ms dos window appears, type your email address in it (the ms dos is in another language, but that doesn't matter, just type your email address)
3. Press enter, it should show a message then the ms dos should close. If it doesn't lose after you press enter and after the message, press enter again.
4. Check your email for the code .
Gleich im vorraus da ist einiger älteres dabei und gemische zwischen Koreanischer und Internationaler Version
[tut]Warrock HAcks using Wpe
--------------------------------------------------------------------------------
WPE Tutorial
--------------------------------------------------------------------------------
Setting Up WPE Pro
Save it somewhere on your PC.
Open WPE Pro and click on "View" then "Options" and set the Max Packets to 500, and unceck all but "Send."
OK the settings and exit out of WPE Pro.
Ammo/Health
Have WarRock running, be in a game, and open up WPE Pro and select WarRock as the target process.
[Health]
Jump off a building and hurt yourself, then go to the nearest health stand and wait until you get to about 70%, then start recording packets.
[Ammo]
Fire a full round of ammunition and go to the nearest ammo stand and wait until you get to about 70%, then start recording packets.
[Both]
As soon as your heal or restock your ammo, Alt+Tab to WPE Pro and stop recording packets. If you have done this right you shouldn't have had to record hardly any packets at all, but the ammount you record will depend upon the number of people in the game.
Since you just healed/restocked the packets should be near the end, scroll down to the bottom of the new window that appeared and start scrolling up. The packet you are looking for should be size 38-40.
Right-click the packet and click on "Add to Send List", then right-click it again and click on "Set Send List with this Socket ID."
Next to the "Filter" tab there is a "Send" tab, click it and you should see the packet you added to the "Send List." Double-click the packet (that is in the send list) and rename it to health/ammo depending upon which you are doing. Now, click on the box to check the packet and click the play button right above it.
The new window will ask you if you want to send it continuously or one time, and how often. Set this to continuously every 1000 ms, and click the play button.
Minimize WPE Pro and enjoy.
Flag Capture
Have WarRock running, be in a game, and open up WPE Pro and select WarRock as the target process.
Walk up to a flag and let it get to about 70%, then start recording packets. As soon as you capture it stop recording packets. The size of the packet should be 38-40.
Right-click the packet and click on "Add to Send List", then right-click it again and click on "Set Send List with this Socket ID."
Next to the "Filter" tab there is a "Send" tab, click it and you should see the packet you added to the "Send List." Double-click the packet (that is in the send list) and rename it to CTF. Now, click on the box to check the packet and click the play button right above it.
The new window will ask you if you want to send it continuously or one time, and how often. Set this to continuously every 1000 ms, and click the play button.
Minimize WPE Pro and enjoy.
SpawnKill
Have WarRock running, be in a game, and open up WPE Pro and select WarRock as the target process.
Start recording packets and be prepared to kill someone. As soon as you kill them stop recording packets. The size of the packet should be 100 or 105.
Right-click the packet and click on "Add to Send List", then right-click it again and click on "Set Send List with this Socket ID."
Next to the "Filter" tab there is a "Send" tab, click it and you should see the packet you added to the "Send List." Double-click the packet (that is in the send list) and rename it to SK. Now, click on the box to check the packet and click the play button right above it.
The new window will ask you if you want to send it continuously or one time, and how often. Set this to continuously every 1000 ms, and click the play button.
Minimize WPE Pro and enjoy.
Invisible
Have WarRock running, be in a game, and open up WPE Pro and select WarRock as the target process.
Start recording packets and go get yourself killed (not suicide). As soon as you die stop recording packets. The size of the packet should be 37-39.
Right-click the packet and click on "Add to Send List", then right-click it again and click on "Set Send List with this Socket ID."
Next to the "Filter" tab there is a "Send" tab, click it and you should see the packet you added to the "Send List." Double-click the packet (that is in the send list) and rename it to Invisible. Now, click on the box to check the packet and click the play button right above it.
The new window will ask you if you want to send it continuously or one time, and how often. Set this to continuously every 1000 ms, and click the play button.
Minimize WPE Pro and enjoy.
-Zame
NEW and improved Warrock hack!
How to install:
unpack all 3 files into the Nexon\WarRock\System folder
then just run the game as normal.
[Only registered and activated users can see links. Click Here To Register...]
how to use the trainers hotkeys are explained in the .txt file!
__________________
Invisible Hack
To do the invisible hack, your first going to need WPE Pro, which I uploaded here:
[Only registered and activated users can see links. Click Here To Register...]
1. Turn off your virus protectors, because it will detect WPE Pro as a virus.
2. Extract WPE Pro, and the .dll to a folder, preferably your desktop.
3. Open up WPE and go to View> Options, and uncheck everything except 'Send'.
4. Get a bypass (Look around for one)
5. Open up WarRock
6. Alt+Tab to WPE Pro. On WPE Pro, click the arrow next to target program, and click Warrock.exe
Now for the actual hacking:
1. Get into a game, and go to a base that's farthest away from the enemy
2. Alt+Tab back to WPE Pro, and click the black arrow.
3. Press F4 to suicide
4. Quickly go back to WPE Pro, and press red square (stop button)
5. In the window that pops up, go all the way down to the bottom, and (I'm doing this off the top of my head) I think it should be size 32.
6. Right click, and press add to send list, and set send list with this socket id.
7. In the bottom left, click the send tab.
8. Check the box in the send list, next to New Send.
9. Press the arrow
10. Do Continuously, 100 milliseconds, open socket, and press the arrow on that window.
11. Now you should be invisible and no one will see you when you respawn.
If you need any help, I'd be glad to help you.
Note: Make sure you respawn at the base farthest from the enemies, because your player will still be at the location you respawned, but you'll actually be walking around, which is why no one can see you.
Weapon unlock Tutorial
This one is realy realy old i known it for ages but have been to lazy to write a tutorial for it.
things needed:
Cheatengine 5.2
go in game start Cheatengine select the warrock process.
choose sniper as char
equip sniper rifle and go to CE search for 23 (2 bytes)
when search is done go in game change weapon to the pistol and go to CE
search value 2
repeat until you have less than 5 addresses
equip sniper rifle and look at the values you should see 23 at them.
try change the value on the addresses 1 by 1 to 40.
when you see the weapon name change to Flashbang in the game you know you have the right address
the range for the weapon values are 0 - 60
Want Invatation Code ... Here you go
[Only registered and activated users can see links. Click Here To Register...]
Scan it if you want, no viruses. I didn't make this, i found it on the internet.
Directions :
1. Download, then open the .exe
2. Once the ms dos window appears, type your email address in it (the ms dos is in another language, but that doesn't matter, just type your email address)
3. Press enter, it should show a message then the ms dos should close. If it doesn't lose after you press enter and after the message, press enter again.
4. Check your email for the code .